acred

acred

1. DIN 65286-1987 AEROSPACE; COUNTERSUNK HEAD SCREWS， WITH RIBBED TORQ-SET (ACR) RECESS AND MJ THREAD， SHORT THREAD LENGTH， STEEL; NOMINAL TENSILE STRENGTH 900 MPA，

1987航空和航天.具有筋状翼形十字槽和MJ螺纹的.短螺纹.耐腐蚀钢制埋头螺栓.额定抗拉强度1100MPa.温度可达425

2. In 2002, the front clip was changed to match the R/T and ACR front clip.

2002年，前夹更改以匹配的R/T和ACR的前剪辑。

3. AAR can be assorted two classifications: Alkali-Silica Reaction (ASR) and Alkali-Carbonate Reaction (ACR).

AAR主要分两类：碱-硅酸反应(Alkali-Silica Reaction，简称ASR)和碱-碳酸盐反应(Alkali-CarbonateReaction，简称ACR)。

4. Rheological behavior of polyblend of PVC and ACR

ACR与PVC共混物的流变行为

5. ACR System, which combines ac drive motor and ac lift motor, promotes acceleration, smooth direction changes, as well as quiet and precise traction and lift.

ACR公司系统，该系统结合了交流传动电机电梯电机和交流，促进加速，平稳的方向变化，以及安静和精确的牵引和升降机。

6. Research of Genetic Algorithm for the Global Path Planning for ACR Prototype System

ACR原型系统的全局路径规划遗传算法研究

7. Study on PC/PBT Blends Toughened by ACR

ACR增韧PBT/PC合金的研究

8. EFFECT OF ACR ON STRUCTURE & PROPERTIES OF ACR-GRAFTED VC RESIN BY SUSPENSION COPOLYMERIZATION

ACR对其接枝VC悬浮树脂材料结构性能的影响

9. Effect of ACR on Rheological Properties of Rigid PVC

ACR对硬质PVC流变性能的影响

10. ACR PRACTICE GUIDELINE FOR THE PERFORMANCE OF SCREENING MAMMOGRAPHY

ACR屏片系统乳腺摄影指南

11. Advances on Impact Modifier of ACR

ACR抗冲改性剂的研究进展

12. ACR is a copolymer of methyl methacrylate with acrylate.

ACR是一种甲基丙烯酸甲酯与丙烯酸酯类的共聚物。

13. Production and technique survey of ACR resin and its development

ACR树脂的生产技术概况及其发展动态

14. Research and application of ACR technology to remove copper scale in boiler

ACR法洗炉除铜工艺的研究与应用

15. Improvement of Surface Quality of Round Cu Ingot Specialized for ACR Pipe with P Deoxidation

ACR管材专用磷脱氧铜圆锭表面质量改进

16. ACR small amount of polymer manufacture, marketing; Chemical raw materials sales.

ACR聚脂制造、销售；化工原料销售。

17. Study on Coagulation of ACR Latex

ACR胶乳凝聚过程的研究

18. Application and Development of the ACR Copper Tube in the Air Conditioner Heat E xchanger

ACR铜管在空调换热器中的应用与发展

19. Study on Toughening and Compound Toughening of RPVC by CPE, CV and Combined with ACR or MBS

CPE,CV及其与ACR,MBS复合增韧RPVC的研究

20. Experiment Evaluation for Unplastized PVC Door and Window Moulding Material Toughened by CPE or ACR

CPE，ACR增韧未增塑聚氯乙烯门窗模塑料的试验评价

21. Research of DHCP and Its Application on ACR

DHCP协议在ACR中的研究与应用

22. STUDIES OF THE BEHAVIORS OF PHASE SEPARATION AND PHASE DISSOLUTION OF BLENDS POLYVINYL CHLORIDE (PVC)WITH ACRYLATE ELASTOMER (ACR)

PVC/ACR共混物相分离、相溶解行为研究

23. A Study on PVC Blends With MBS and ACR

PVC/MBS/ACR共混体系的研究

24. Blending Technology of PVC and ACR and Its Properties

PVC和ACR共混工艺及其性能

25. Keywords PVC modifier;ACR resins;production process;development;

PVC改性剂;丙烯酸酯类树脂;生产工艺;发展;

26. Preparation and Applied Performance of ACR as Impact Modifier for PVC

PVC用ACR冲击改性剂的研制和应用性能

27. Property Comparison of QWM-981 Impact Modifier ACR with CPE

QWM-981抗冲ACR与CPE性能比较

28. Property of ACR Impact Modifier Modified by Nano-SiO_2

SiO_2纳米粒子改性ACR抗冲改性剂的性能

29. “That is, they can continue to use their professional judgement in determining whether or not to report a contravention, but must report using the ACR,” he said.

“他们可以继续使用专业判断，在决定是否报告违规时，但是必须用ACR报告，”他说。

30. "The ...ACR has not updated its recommendations for nonbiologic DMARDs since 2002 and has not previously developed recommendations for biologic agents.

“美国风湿病学会(ACR)自2002 年后没有更新过非生物DMARD 的使用建议，也还没有提出过生物制剂的使用建议。

31. Microstructure and properties of ACR copper tube during three-roll planetary milling process

三辊行星轧制过程中ACR紫铜管的组织和性能演变

32. Moreover the PSW cast-roll process was the key technology of the production of ACR copper tubes.

且PSW轧制技术是成功实施用铸轧法生产ACR铜管新工艺的核心技术。

33. Experimental pathology study on the effect of ACR on axon of both Ola mice and 6J mice

丙烯酰胺对变异Ola鼠和正常6J鼠轴突影响的实验研究

34. Production status and market analysis of ACR, the auxiliaryagent of acrylic ester kind

丙烯酸酯类助剂ACR的生产简况及市场分析

35. Acrylates Impact Modifier ACR and It's Development

丙烯酸酯类抗冲改性剂ACR及其发展

36. Mechanical blending of ACR cud PVC was explored to improve the fluidity of PVC.

为改善PVC的流动性，对ACR与PVC机械共混工艺进行探索。

37. Keywords emulsion polymerization;ACR resin;construction and propert;

乳液聚合;ACR树脂;结构与性能;

38. The structure of PVC dispersed with CPE and ACR were analyzed from the angle of high polymer thermodynamics.

从高分子热力学的角度分析了CPE和ACR在PVC中分散所形成的制品结构。

39. advanced cracking reactor (ACR)

先进裂化反应器

40. Experimentation method of concrete aggregate ACR activity reaction

判定混凝土骨料ACR活性反应的试验方法

41. POLYMERIZATION OF FUNCTIONAL CORE/SHELL ACR BY MACROMOLECULE DESIGN

功能性核/壳结构ACR的分子设计

42. ACR PRACTICE GUIDELINE FOR DIAGNOSTIC REFERENCE LEVELS IN MEDICAL X-RAY IMAGING

医学X线成像中的参考剂量水准

43. Dopplor Observation on Relationship between Flow in Artery of Central Retina(ACR) and Left Ventricular Performance (LVP)in Primary Hypertension(PH)

原发性高血压病视网膜中央动脉血流与左心室功能关系的多普勒观察

44. Anti-Conspiracy of Reputation(ACR)

反名声合谋

45. The author has suggested that the study on developing ACR and MBS impact modifier should be carried out domestically.

国内应加大对ACR和MBS抗冲击改性剂的研究与开发。

46. In the screen-film parts, this report largely follows the Mammography Quality Standard Act (MQSA) of the US and the American College of Radiology (ACR) 1999 Mammography Quality Control Manual.

在传统乳房摄影系统部分，主要依循美国乳房摄影品质标准法案及美国放射学院于1999年所出版之乳房摄影品管手册，其内容涵盖多项乳房摄影系统物理测试。

47. All females with RA utilised in the case control group of the study were diagnosed according to the 1987 American College of Rheumatology (ACR) criteria for RA.

在控制群体研究的情况下，依照 1987 美国学院风湿病学 (ACR) 的标准对所有犯 RA的女性进行诊断。

48. The title environmentally friendly UV curing anti-corrosive coati ng s is developed by adding photoinitiator and reactive diluent into self-made acr ylic-epoxy resin.

在自制的丙烯酸环氧树脂中加入光引发剂和活性稀释剂,得到环保的紫外光固化防腐涂料。

49. A study of the structure and vital technologies in hardware abstraction layer of ACR

基于ACR的硬件抽象层结构及关键技术研究

50. Keywords PC;SMA;Plastics Blend;Impact Modifier;ACR;Aging Resistance;Impact Strength;

塑料合金;冲击改性剂;ACR;耐老化性;冲击强度;

51. Now and Future of Impact Modifier ACR for Plastics

塑料抗冲击改性剂(ACR)的现状与发展

52. Multi-group lattice code WIMS-AECL has strong modeling capability for clustergeometry and isotopic composition, so it has been used for the design and analysis ofthe advanced CANDU reactors (ACR).

多群栅元程序WIMS-AECL对棒束几何结构和材料成分具有很强的建模能力,被指定用于先进CANDU堆(ACR)的设计和分析。

53. Access Convergence Rate(ACR)

大规模接入汇聚路由器

54. Research on main techniques based on ACR

大规模接入汇聚路由器关键技术研究

55. A Key Mechanism of Supporting IPTV on ACR

大规模汇聚路由器支持IPTV业务的关键技术研究

56. Experimental results show that the INMF is reliable,securable and can fully satisfy the integrated management requirement of the ACR.

实际运行表明,该一体化管理结构安全可靠,完全满足ACR的一体化管理要求。

57. STUDY ON THE PSW CAST-ROLL PROCESS IN THE PRODUCATION OF THE ACR COPPER TUBES

对ACR铜管生产中PSW轧制技术的研究

58. Better mechanical properties can be achieved by using nano-CaCO3 combined with ACR.

将nano-CaCO_3与ACR抗冲改性剂配合使用能使PVC具有较高的力学性能。

59. that you may become sacred bread for God's acred feast.

将你烘焙成上帝圣宴之中的圣饼。

60. And then he assigns you to his sacred fire, that you may become sacred bredad for Gods's acred feast.

尔后，爱用神圣的火烘陪你，让你成为上帝圣宴上的圣饼.

61. Research of embedded database system and its application on ACR

嵌入式数据库系统在ACR中的应用研究

62. Association for Consumer Research ACR

年消费者调研协会

63. The toughning of PVC by ACR was also studied.

并研究了其对PVC的增韧改性。

64. ACR and customer credit control.

应收帐款的催收及客户信用控制。

65. In this paper, the moderator fluid field and temperature field of three moderator circulation designs for advanced CANDU reactors (ACR,TANES) has been numerically simulated by applicable nu merical procedure.

应用数值方法对先进CANDU型反应堆(ACR、TANES等)慢化剂冷却系统的3个慢化剂回路方案的流场和温度场进行了数值模拟。

66. In this paper, the moderator fluid field and temperature field of three moderator circulation designs for advanced CANDU reactors( ACR, TANES) has been numerically simulated by applicable nu merical procedure.

应用数值方法对先进CANDU型反应堆(CR、ANES等)化剂冷却系统的3个慢化剂回路方案的流场和温度场进行了数值模拟。

67. The Izod notched impact strength of PMMA modified by ACR increased by 42.42% when the ACR mass fraction was 5%.

当ACR质量分数为5%时，改性PMMA的缺口冲击强度比未改性的提高了42.42%。

68. Moreover,the the impact strength of the whole system arrive to the maximum when the contentof CaCO3 in ACR is 20% and ACR is 10% in PVC.

当表面改性剂用量约为填料量的1%，ACR中CaCO_3含量为20%，且PVC中加10份ACR时，ACR与PVC共混后的抗冲击强度最大。

69. audio cassette recorder(ACR)

录音机

70. Keywords ACR;property;manufacture;market;

性能;生产;市场;

71. It can be thought of as far end ACR.

您可以想像成是远端之[杂讯比值]。

72. Polyvinyl Chloride Toughened by Impact Modifier of ACR

抗冲击改性剂ACR增韧聚氯乙烯

73. Toughening Mechanism of Polyvinyl Chloride Toughened by Impact Modifier of ACR

抗冲击改性剂ACR增韧聚氯乙烯的机理

74. Modification Effect and Application of Impact Resistant ACR Resin

抗冲型ACR树脂的改性效果及应用

75. It also introduced the impact modifier of ACR is developing to the multifunction and functionalization, and application of the impact modifier of ACR to PC, PA6, epoxy resin, PET and PET/PC.

指出了ACR抗冲击改性剂正向多功能、官能化发展。 简要介绍了ACR抗冲击改性剂在PC、尼龙 6、环氧树脂、PET、PET/PC等方面的应用

76. The advantages and disadvantages of traditonal ACR and CPE modifiers for PVC were indicated.

指明了传统ACR和CPE在PVC改性中所存在的优缺点。

77. In ACR group, CD8+ cells were significantly more than CD4+ cells in both portal tract and lobule (P<0.05).

排斥反应组中,CD8+细胞浸润程度显著高于CD4+细胞(P<0·05)。

78. CD8+ cells, CD3+ cells and CD45RO+ cells infiltrated ducts or vessels in ACR Group more easily than those in nonACR group (P<0.01).

排斥组CD3+、CD8+、CD45RO+细胞胆管或血管浸润率显著高于非排斥组(P<0·01)。

79. The amount of CD8+ cells and CD45RO+ cells was related to the degree of ACR.

排斥组中,汇管区CD8+和CD45RO+细胞浸润程度与排斥反应组织学分级显著相关(r值分别为7·481,9.103,P<0.01)。

80. CD3+ cells, CD8+ cells and CD20+ cells of ACR group were significantly more than those of non-ACR group in portal tract (P<0.01), but not significantly different in lobule (P>0.05).

排斥组汇管区CD3+、CD8+、CD20+细胞浸润程度均显著高于非排斥组(P<0·01),两组间各型淋巴细胞在小叶内浸润程度均无显著差异(P>0·05)。