addenda

addenda

1. ADDENDUM OF HAIYUAN EARTHQUAKE(M=8.5), Dec. 16, 1920

1920年12月16日海原8.5级地震补遗

2. gear with addendum modification

[化] 变位齿轮

3. amount of addendum modification

[机] 齿顶修改量

4. Updated the read-me to include addendum on Knighthood Orders.

“更新读我包括增编骑士订单。

5. An amendment or addendum to this EULA may accompany the Software.

“软件”可能附带对本《协议》的修正条款或补充条款。

6. Investigation of Addendum Together With Textual Research on The Seven Confucian Classics & Mencius

《七经孟子考文补遗》考述

7. Jing Ji Zhuan Gu & Its Addendum

《经籍?诂》正编、补遗刊行考

8. From the very beginning I rose several positions, bent in 2 from the addendum circle has surpassed Vetter.

一开始我就上升了好几个位置，在2号弯从外圈超过了维特尔。

9. The Choice of Addendum Coefficient of the Compound Gear Pump with Three Idlers

三惰轮复合齿轮泵齿顶高系数h_a~*的选择

10. Amended and Restated Addendum to Memorandum of Understanding Governing Listing Matters

上市事宜谅解备忘录补篇

11. The following documents, including applicable addenda, constitute a part of this standard as described herein.

下列标准和可适用的附件，通过在本标准中引用而构成本标准的条文。

12. THE CALCULATION OF ADDENDUM REDUCED COEFFICIENT ON THE FIRST AND LAST TEETH OF AN INCOMPLETE GEER

不完全齿轮首尾齿齿顶降低系数的计算

13. Compared with traditional pulse generators, this pulse generator enhances the machining efficiency and surface quality of Micro WEDM. It can machine high quality micro gear with diameter of addendum 0.3 mm easily.

与传统的脉冲电源相比,此脉冲电源提高了微细WEDM速度和表面质量,并且能切割出高质量的齿顶圆直径为0.3mm的微小齿轮.

14. All correspondence and documents related to this solicitation, including addenda, shall be written in both Chinese and English, and, in the event of any discrepancy, the Chinese version shall prevail.

与本次设计方案征集活动有关的文件及补充文件均应使用中文及英文书写,在中、英文两种版本的意思表达不一致时应以中文版本为准。

15. Ten Exempla on Discussing an Addendum of Collate of Nan Qi Shu Edited by Zhonghua Shuju

中华书局本《南齐书》校勘商榷、补遗十例

16. To demonstrate the stability of the magenta layer when the curve shape stabilizing addendum is added, tests on incubation are compared to fresh coatings.

为了证明品层的稳定性，加一种对曲线形状有稳定作用的化合物使老化实验与新鲜涂层进行比较。

17. In addition, to avoid evaluate transcend equation,joggle angle is regarded as one of design variables instead of addendum modification coefficient.

为了避免解超越方程和减少计算量,不再以齿轮的变位系数为优化设计变量,以啮合角代之,提供求解问题的另一条思路,算例结果表明此观点的可行性。

18. Through enlarging the top fillet arcs radii and meanwhile reducing the addenda of the tools, an improvement on basic profiles of rack kind tools is proposed to improve the tooth bending strength of the external involute cylindrical gears.

为提高外啮合渐开线圆柱齿轮的齿根弯曲强度 ,针对齿条型刀具提出了减小刀具齿顶高并同时加大其齿顶过渡圆弧半径的改进方案。

19. is addendum of the Guizhou chronicles.

为贵州志补遗。

20. Compared with the FLD diagram and the results of deforming, the optimized shape of addendum is obtained and the economical and reasonable die construction is designed.

主要研究了不同工艺补充对零件冲压成形的影响,通过FLD图和成形结果对比,对工艺补充部分进行调整得到了最优化的拉深件型面,并设计出经济合理的模具结构。

21. Manually-operated piezo-electric spark gas ignition systems and components; Addenda

人工操作压电型电火花气体点火装置和件

22. The new requirements for TOFD technique specified in the latest edition （2006 addenda）of the ASME Code were presented。

介绍ASME规范最新版（2006增补）有关TOFD技术的最新规定。

23. A separate addendum is required by the IB indicating fees and signed by the customer.

介绍经纪人需要说明费用的独立附录，并经客户签署。

24. Commission for the Facilitators / Intermediaries shall be distribute in accordance to the agreed investment distribution and the distribution list are shown in Addendum 1.

仲介人佣金按不可撤销的投资款项分配及委讬分流的付款指令(如附件1)支付之。

25. Any addendum to be agreed in future to be considered as integral parts of this contract.

任何在将来双方达成一致的附录都将作为本合同不得分割的一部分。

26. But the domestic study of Haruki Murakami concentrates on his saga novel, the study of his novelettes and short Stories is little (you can make reference to my investigation in the addendum).

但国内关于村上春树的研究主要集中在他的长篇上,对他的中短篇小说则甚少涉及(见本论文末尾附录的笔者调查)。

27. Safety standard for low lift and high lift trucks; Addenda

低升降和高升降式装卸车的安全标准。补充件

28. Residential Telecommunications Cabling Standard - Addendum 2 - Control Cabling for Residences

住宅电信电缆敷设标准。附录2.住宅电缆敷设的管理

29. Portable camp lanterns for use with propane gas; Addenda

使用丙烷气体的便携式营地灯。补充件

30. Portable camp cook stoves for use with propane gas; Addenda

使用丙烷气体的便携式野营烹调用炉。补充件

31. Portable catalytic camp heaters for use with propane gas; Addenda

使用丙烷气体的快速型携带式野营加热器。补充件

32. Limitation and Addendum on Lawmaking of Encroach Crime

侵占罪立法的缺陷及补正

33. Gas hose connectors for portable outdoor gas-fired appliances; Addenda

便携式室外燃气器具用软管接头。补充件

34. Proposed Addendum to: Standardization Mark (SM) of quality and Import Standardization Mark (ISM), Directives 2009.

修订提案：质量标准标志（SM）和进口标准标志（ISM），指令2009。

35. This article consists of five parts, including introduction, three main chapters and conclusion.At the end of this article are the literatures and addenda.

全文由绪论、三个主要章节和结语五个部分构成，文末为参考文献和附录部分。

36. Keywords measuring instrument;addendum circle diameter;dedendum circle diameter;

关键词量具;齿顶圆直径;齿根圆直径;

37. Although its textual content had not been what was drafted by Liuxin, its historical value as an addendum can not be denied at will.

其文本内容虽然已非刘氏之旧，但此书作为补遗之作的史料价值，决不可轻易否认；

38. Based on the judged conditions about node external gearing, it calculates the connection with kind's parameter when gears with addendum modification appear node external gearing.

其次根据节点外啮合的条件，推出了变位齿轮节点外啮合时各参数之间的关系；

39. Just an addendum to the previous instructions.

再加一点前面摩机的补充。

40. Addendum to Exceptions on Adjudication Without Aggravated Punishment

判决不得加重处罚之例外情况补遗

41. Keywords preshaving hob;addendum antenna;addendum modification;shaving stock;

剃前滚刀;齿顶触角;齿顶修缘量;留剃余量;

42. 11.The index is worked out according to the order of sections and chapters as well as subject categories.There is no index for survey, the "Highlights", memorabilia and addenda.

十一、索引按篇目顺序分类编制，概述、撷萃、大事记、附录不作索引。

43. Safety code for existing elevators and escalators (includes requirements for electric and hydraulic elevators and escalators); Addenda

升降机和自动电梯(包括电子和液压升降机的要求)现行安全代码。附录

44. Wrought copper and copper alloy solder joint pressure fittings; Addenda

可锻铜和铜合金软钎焊连接压力配件。附录

45. Again, this isn't going to be source for a packer, but I might do a straightforward one and publish it as an addendum to this series if folks are interested in having some working source as a starting point.

同样在附录部分我会直接给你一个程序假如你想将这个作为你自己程序的加壳器，或者做一些改进。

46. Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5

商用建筑电信电缆敷设标准。第2部分:对称双绞电缆敷设件。附录5

47. Therefore,the suitable coefficient of engagement overlap got by profile correction and addendum modification is beneficial to the output property of the gear pump.

因此，对齿轮齿形进行修形和变位修正使齿轮得到合适的啮合重合系数有利于改善齿轮泵的输出特性。

48. Based on what has already been achieved, propose amendments and addenda on policy, make some suggestions, which serve as reference for our country"s automobile enterprises" investment.

在此基础上,提出若干有针对性的对策与建议,以供我国轿车企业投资作为借鉴。

49. There are more than 20 restrictive conditions about the selection of the addendum modification coefficient in internal gear transmission.

在渐开线齿轮内啮合传动中,影响齿轮变位系数选择的约束条件有20余种,它们与齿轮的啮合原理、强度条件和制造工艺有关。

50. Methods for performance evaluation of coordinate measuring machines; Addenda

坐标式测量机性能评价方法。补充

51. During the visit two further addenda to the memorandum were signed, expanding the partnership.

埃塞克斯大学于2005年11月与南京大学金陵学院签署了一个关于理工科的学生的2＋2计划。

52. Optimum Design of Basic Amplifying Circuit and Addendum to Linear Application of Integrated Operational Amplifier

基本放大电路的最佳设计和集成运算放大器线性应用的补充

53. Calculation of Contact Stress and Selection of Addendum Modification of Plastic Gears

塑料齿轮齿面接触应力计算及其变位系数选择

54. The addendum circle may separate, the assembly is easy.

外圈可分离，组装容易。

55. Multiple-page resumes can use addendum pages after page two.

多页履历可在第二页之后采用附录形式。

56. Addendum on the Haongho-Paiho Museum in Tientsin

天津北疆博物院补考

57. "addendum" -Okay, the little thing that hangs down at the back of your throat.

好了，有一个小东西挂在了在后面的喉咙。

58. Manually operated metallic gas valves for use in house piping systems; Addenda

家用管道系统用手控金属燃气阀。附录

59. Addenda of ASME Boiler and Pressure Vessel Code, Section I. leaning some important changes in it and comparing with the relevant provisions in China Standard.

对ASME规范第I卷2006年增补作简要介绍，对其中重要的修改进行学习，并与我国标准中的相应条文进行比较。

60. A brief introduction to 2007 Addenda to ASME Boiler and Pressure Vessel Code, Sec. I, learning some important changes in it and comparing with the relevant provisions in China Standard.

对ASME规范第I卷2007年增补作简要介绍，对其中重要的修改进行学习，并与我国标准中的相应条文进行比较。

61. A brief introduction to 2008 Addenda to ASME Boiler and Pressure Vessel Code, Sec. I, learning some important changes in it and comparing with the relevant provisions in China Standard.

对ASME规范第I卷2008年增补作简要介绍，对其中重要的修改进行学习，并与我国标准中的相应条文进行比较。

62. A brief introduction to 2005 Addenda of ASME Boiler and Pressure Vessel Code, Section I. Leaning some important changes in it and comparing with the relevant provisions in China Standard.

对ASME锅炉及压力容器规范第I卷2005增补作简要介绍,对其中重要的修改进行学习,并与我国标准中的相应条文进行比较.

63. Two methods are usually used to increase gearing backlash for counter trains:1.Decrease addendum modification coefficient,but remain center distancein constant.

对于计数齿轮传动,通常采用两种方法增大侧隙:中心距不变,减小变位系数;

64. The Addendum for the Generalized d'Alembert Equations of Motion

对广义达朗贝尔运动方程的一点补遗

65. Press on Head Without Pressing Addendum Circle and Design of Its Model Tool

封头的无压边圈冲压及模具设计简介

66. Attach as an addendum to your paper.

将这一页的叙述当作报告的附件。

67. The spot erosion of pinion is between the dividing circle and the root circle.The spot erosion of gear is between the dividing circle and addendum circle.

小齿轮点蚀发生在分度圆与齿根圆之间，大齿轮点蚀发生在分度圆与齿顶圆之间。

68. addendum circle diameter of workpiece

工件顶圆直径

69. The convenience of addendum modeling and modification is an important access to improve design efficiency.

工艺补充曲面设计和修改的便利性,是提高设计效率的重要途径。

70. The addendum surface design has great effects on the forming quality to automotive panel.

工艺补充面设计的合理性,是保证覆盖件成形质量的重要条件。

71. ADDENDUM OF THE DIAGNOSIS OF TROMBICULINDUS (TROMBICULINDUS) GUANGDONGENSIS ZHAO ET ZHANG,1979

广东叶片恙螨Trombiculindus(Trombiculindus)guangdongensis Zhao et Zhang,1979特征补遗

72. Addendum on Microscopic Identification of Desmodium Styracifolium

广金钱草显微组织补遗

73. Addendum to NDR Two-Port Realization Theorems

微分负阻双口器件实现定理补遗

74. Partnership Agreement must accompany Account Application, and Partnership Addendum enclosed infra must be completed and signed.

必须随表附上合伙协议,并且填写及签署合伙附件。

75. Yours truly MEYER WOLFSHIEM and then hasty addenda beneath: Let me know about the funeral etc. do not know his family at all.

您的忠实的，迈耶。沃尔夫山姆下面又匆匆附了一笔：关于丧礼安排请告知。又及：根本不认识他家里人。

76. All the amendments and addendum of the Contract valid only then issued in writing and sign by both Parties.

所有合同的修改和补充必需在合同双方书面完成并签字后方可生效。

77. a brief addendum at the end of a newspaper article.

报纸社论结尾处的简短的附录。

78. Keywords drawing panel;drawing process;planning;addendum;

拉延件;拉延工艺设计;工艺补充部分;

79. 2.The computing formula of theoretical cone angle of the wormwheel addendum cone and dedendum cone can be derived yet.

推导出蜗轮齿顶圆锥的理论锥角计算公式及齿根圆锥的理论锥角计算公式 .

80. 5.The computing formula of theoretical cone angle of the wormwheel addendum cone and dedendum cone can be derived yet.

推导出蜗轮齿顶圆锥的理论锥角计算公式及齿根圆锥的理论锥角计算公式.