anodizing

anodizing

1. ANOD model

ANOD模型

2. Anodizing of aluminium and aluminium alloys-Terms

GB/T11109-1989铝及铝合金阳极氧化术语

3. Anodizing of aluminium and aluminium alloys-Copper accelerated acetic acid salt spray test for anodic oxide coatings (CASS test)

GB/T12967.3-1991铝及铝合金阳极氧化氧化膜的铜加速醋酸盐雾试验(CASS试验)

4. Anodizing of aluminium and aluminium alloys--General specifications for anodic oxidation coatings

GB/T8013-1987铝及铝合金阳极氧化阳极氧化膜的总规范

5. Keywords CF /MDF cement composite;anod surface treatment;interface adhesion;

MDF水泥复合材料;阳极表面处理;界面粘结;

6. XV(Blue):A fast cutting media that leaves excellent finishes ready for anodizing or painting.

XV（兰色）：较快切削的磨块，留下理想的表面做极化处理或油漆。

7. WANG Yan-zhi.Research advances in the anodizing technology of aluminum and its alloy[J].Materials Protection, 2001,34 (3): 22 - 23.

[2]王艳芝.铝及其合金阳极氧化技术研究的进展[J].材料保护,2001,34(3):22-23.

8. enamelled anodizing

[化] 瓷质阳极氧化

9. sulphuric acid anodizing

[化] 硫酸阳极氧化

10. hard anodizing

[化] 硬质阳极氧化

11. phosphoric acid anodizing

[化] 磷酸阳极氧化

12. oxalic acid anodizing

[化] 草酸阳极氧化

13. milk white anodizing of aluminium

[化] 铝乳白色阳极氧化

14. chromic acid anodizing

[化] 铬酸阳极氧化

15. Anodizing in phosphoric acid modified sulphuric acid/boric acid bath for structural bonding of aluminum alloy，Surface and coating technology, (SCI).

一种铝合金结构粘接用混合酸阳极氧化方法.发明专利.申请号：200710065205.8

16. The following procedure is for anodizing aluminum parts.

下面是介绍零部件的铝阳极氧化的流程。

17. Hard Anodizing of Aluminium Alloys with Various Electric Wave Forms

不同电源波形的铝合金硬质阳极氧化

18. With different finish treatment:anodizing, power-coating, Zinc-Plated, Chrome coated , Nickel Plated etc.

不同的表面处理方式：氧化，镀锌，镀镍，镀铬，等

19. two-step anodizing

二步阳极氧化

20. A sealing technology of the holes in the hard anodizing film with the deposited W alloy was introduced to increase its hardness.

介绍了一种有效提高铝基硬质氧化膜硬度的电沉积钨合金封孔技术。

21. Anionic electrodeposit coating line for aluminum shell of solar water heater is introduced.Anodic oxidation,anodizing electrolytic coloring and anionic electrodeposit coating process are focused.

介绍了太阳能热水器铝材壳体阳极电泳涂装线设备,重点详述了阳极氧化、电解着色和阳极电泳涂装工艺。

22. Conduct anodizing of aluminum and its alloy was introduced with operating hints and points for attention of pretreatment, anodizing, post-treatment procedure.

介绍了铝极其合金导电氧化工艺过程中前处理、阳极氧化以及后处理等工序的操作要点和注意事项。

23. Since the very beginning of its foundation, Shanghai Unison has been equipped with complete Casting Line, Imported Extrusion Line, Powder Coating Line, Anodizing Line and Assembling Line.

从它成立之初，上海友升就拥有完全的熔铸生产线，进口挤压生产线，金属粉末喷涂线，阳极氧化处理线和装配生产线。

24. To start, lets take a look at a fairly advanced anodizing line.

先看看一个比较完整的阳极化设备。

25. The anodizing plant can produce surface finishing on natural anodizing, color anodizing, electro-depositing anodizing and bright dip.

公司可提供经氧化、着色（单、双盐）及电解抛光等表面处理的产品。

26. Additional views on "experience in conductive anodizing of aluminum and its alloys"

关于"铝及铝合金导电氧化工艺经验谈"一文的补充

27. cold anodizing

冷阴极氧化处理

28. Almost everything you need can be found locally except anodizing dyes and sealer which I sell small quantities of on this site.

几乎所有您需要的材料可以在当地买到，除了氧化染料和密封材料。在此网站，我有出售少量。

29. Effects of technological conditions such as temperature and current density on the growth rate and quality of the anodizing film are analysed, and a practical operating technology is obtained.

分别对温度与氧化电流密度等影响氧化膜生长速度与质量的工艺条件做了分析研究，取得了实用的工艺操作规程。

30. Measures for saving energy during anodizing process of aluminuim profiles are summarized and analyzed. The methods for recovering chemicals are inhoduced.

分析和总结了铝型材阳极氧化过程中节约电能的各种措施，介绍了回收化工原料的方法。

31. Besides, the hardness of W-Co alloy was compatible with the hard anodizing film.Stress concentration was effectively reduced, therefore the fil...

加之钨钴合金本身的高硬度和高强度可以与硬质氧化膜较好地相配合,能有效地减小应力集中,膜层硬度也因此获得明显提高。

32. Besides, the hardness of W-Co alloy was compatible with the hard anodizing film.Stress concentration was effectively reduced, therefore the film hardness was increased obviously.

加之钨钴合金本身的高硬度和高强度可以与硬质氧化膜较好地相配合，能有效地减小应力集中，膜层硬度也因此获得明显提高。

33. There are also: tailoring, welding, painting, sandblasting, the entire flat, polished, galvanized, IMPREGNATION, vol circle forming, anodizing, coloring, such as technology and equipment.

另外还有：剪裁、焊接、喷漆、喷沙、整平、抛光、镀锌、浸塑、卷圆成型、阳极氧化、着色等工艺和设备。

34. YBN is using the treatment of imitated anodizing treatment on bicycle chain in order to manufacture a kind of shiny and colorful chain.

可用此技术，烤出颜色鲜豔，外观像阳极处理后的链条。

35. At the same time,we have studied formational mechanism of pore alumina films in the initial stage of anodizing by measuring current density.

同时利用阳极氧化初期电流密度的变化,分析了多孔氧化铝膜的形成机理。

36. Sandblasting bright black anodizing LT

喷砂光亮黑色阳极氧化

37. The anticorrosive property of anodizing oxide film on aluminum alloys could be improved by adding rare earth additives in anodizing solutions.

在铝合金阳极化溶液中加入稀土添加剂,能够提高氧化膜的耐蚀性能;

38. In aluminium anodizing process, concentration of NaOH, Al 3+ and additives in alkaline etching solution were determined.

在铝合金阳极氧化生产工艺中,测定碱蚀槽液苛性钠、铝离子、添加剂的浓度。

39. Research on Hard Anodizing Power Supply of Alternative Process and Full Digitalization Based on Embedded Microprocessor

基于嵌入式的多工艺全数字硬质阳极化电源的研究

40. composite anodizing film

复合氧化膜

41. Keywords porous alumina;anodizing;template;Er3+-Acetylacetonate;Sol-Gel;fluorescence spectra .;

多孔氧化铝;阳极氧化;模板;乙酰丙酮合铒;溶胶-凝胶;荧光光谱;

42. Study of a rapid hard anodizing process for aluminium alloy under high currents

大电流下铝合金快速硬质阳极氧化工艺的研究

43. If have the requried to do suface finish,we can supply the anodizing,and Irridited, lasering to logo.Plating, Treating against oxidation.

如果客户需要我可以提供表面阳极处理（导电阳极和不导电阳极），无铬化处理，镭射图标,电镀，防氧化处理等。

44. Its comprehensive coverage focuses on anodizing for surface protection and decorative effects.

它的广泛报导集中在表面保护和装饰作用的阳极电度。

45. In the paper the research of the influence of surface treatments such as shot peening, roller burnishing, anodizing, and laser melting on fatigue properties of magnesium alloys is summarized.

对近年来有关表面处理镁合金疲劳性能的研究进行了总结，归纳了喷丸处理、滚压强化、阳极氧化、激光熔融等表面处理方法对镁合金疲劳性能的影响及机理。

46. Before we get to the anodizing procedure, let's talk about prepping the aluminum part first.

开始阳极化之前，说说零件的预处理。

47. The manufacturing path graphically shows the potential cost savings and time impact that can be achieved when you eliminate hard-coat anodizing.

当您消除硬氧化层时,生产图能显示出可能节约的时间和金钱。

48. constant voltage anodizing process

恒定电压(阳极氧化)法

49. constant current anodizing process

恒定电流(阳极氧化)法

50. I include desmut in the advanced anodizing kit for folks doing unknown or non typical 6000 series alloys.

我的阳极化车间包含了剥黑膜工序，来做那些未知的或者非6000系列合金的阳极化。

51. The effects of the electrolytes concentrations and anodizing parameters on the morphologies of Al high voltage anodization films(HVAF) were discussed.

探讨了混合酸体系中电解质浓度与氧化参数对铝高压阳极氧化膜微观形貌的影响。

52. Keywords kneading copper anod anode dirt bridge effect;

揉制磷铜球;阳极泥;架桥效应;

53. Abstract : The process of pore initiation and development during anodizing of aluminium was studied using ultramicrotome sectioning allied with tran- smission electronmicroscopy.

摘要 ： 用超薄切片配合透射电子显微镜观察研究了多孔型铝阳极氧化膜孔洞产生及发展的全过程。

54. The study on the deposition of copper, nickel, and tin is important for understanding the aluminum anodizing and electrolytic coloring mechanism.

摘要了解着色膜中铜、镍、锡的沉积情况，是研究铝阳极氧化电解着色机理的前提。

55. A variety of surface treating processes for aluminum and its alloy are introduced.The comprehensive discussion are made on the anodizing, coloring, micro arc oxidizing are laser treating.

摘要介绍了铝及其合金表面处理的各种方法，详细介绍了阳极氧化及着色处理，并对该领域目前研究的热门课题-微弧氧化及激光处理进行了介绍。

56. Self-organized nanopore films in anodic alumina have been fabricated by two-step anodizing process in oxalic acid solution.Hexagonal nanopore arrays were obtained within domains of 1 micrometer.

摘要以草酸为电解液，采用两步阳极氧化工艺，自组装生长纳米孔氧化铝膜，在一个微米范围内获得六方纳米孔阵列。

57. Objective: To study the shape and thickness of oxide film on Ni-Cr porcelain alloy after different surface pretreatment including anodizing and degassing-preoxidation.

摘要目的：分析烤瓷用镍铬合金在上瓷前经过阳极钝化，除气预氧化处理后对其表面氧化膜的形貌、厚度的影响。

58. The anodizing of ZL102 aluminum alloy castings as investigated in the mixed boric acid and tartaric acid solution.

摘要研究了ZL102铝合金在硼酸-酒石酸二元混酸体系中的阳极氧化。

59. Aluminum products with shing uniform surface was prepared by electrochemical graining process, including alkaline cleaning, 1% NaOH etching, electrochemical roughing in HCl, NaOH treating and anodizing in 5% H2SO4 etc.

摘要研究了铝材无挂灰电化学砂化处理工艺。以盐酸作为电解液的主成分，控制合适的电流密度和电解时间等工艺参数，通过6步处理，得到砂化均匀、粗糙度适中及光亮的砂面。

60. The anodizing technology of aluminum alloy 2A12 was studied in sulfuric acid with different concentration by self-made pulsed constant current apparatus.

摘要采用自制脉冲恒流电源，对硬质铝合金2A12在高、低硫酸浓度下的阳极氧化工艺进行研究。

61. Anodizing is an effective method to improve the corrosion resistance of magnesium alloys, and the selected electric parameters have great effects on the properties of anodic coatings.

摘要阳极氧化是提高镁合金耐蚀性的一种有效方法，选择的电参数对氧化膜性能影响很大。

62. With Anodizing experience is prior.

有阳极氧化经验者优先考虑。

63. The factory specializes in hard anodizing aluminum and aluminum products anodizing general of the manufacturers.

本厂专业从事铝硬质阳极氧化和铝制品普通阳极氧化的厂家。

64. Coppor corrosion in Al alloy was restrained,resulted in the realization of applying Aluminium anodizing to LY12and LY11.This technology can be put into batch production.

本工艺有效地抑制了铝合金中铜的腐蚀,实现了铝阳极化在LY12、LY11上的应用,经中试后具备了批量生产能力。

65. This paper deals with the major features of the machine, its technical performance in production, weakpoints and utilization of rotor anodizing in Nanping Textile Plant.

本文介绍该机的主要性能，实际生产技术水平和存在的问题，纺杯阳级化处理在南平纺织厂使用的状况与探讨。

66. The anodizing process and anodic aluminum oxide (AAO) films were characterized by means of Voltage-time curves, SEM, EDAX, XRD and electrolyte capacitor model.

本文利用阳极氧化的电压-时间曲线、扫描电子显微镜、能量色散X射线谱、X射线粉末衍射仪、电容器模型等仪器对氧化过程及氧化膜进行表征。

67. In view of the problems in chromate anodizing process of aluminium alloy,this paper analysed the process of degreasing、rinsing、chromate anodizing、sealing and the experiment results.

本文针对铝及铝合金铬酸阳极氧化工艺中出现的问题,论述并分析了除油、水洗、铬酸阳极氧化、封闭等工艺方法和试验结果。

68. Bright Moulds Systems PVT.Ltd is interested in importing the following machine from China. Heat Vacuum Transfer Printing Equipment suitable for Profiles = Used in Aluminum Anodizing plants (also k...

查看“机械及工业制品-行业专用机械设备-印刷设备”:公司信息商品信息供应信息

69. Hard Anodizing of Diesel Engine Aluminium Piston

柴油机铝活塞的硬质阳极氧化

70. Not all steps are needed such as etch and desmut depending on what alloy and the type of surface you expect after anodizing.

根据你期望的界面类型、成色和合金种类，有些步骤如蚀刻和剥黑膜，是不需要的。

71. Effects of Concentration of Sodium Hydrate on Anodizing for Magnesium Alloys

氢氧化钠浓度对镁合金阳极氧化的影响

72. color anodizing

氧化着色

73. The Design and Engineering of the Electrical Control System of the Fully Automatic Line of Colorful Anodizing and Electrophoresis painting

氧化着色电泳涂漆全自动生产线电控系统的设计

74. Keywords alumina film;anodizing voltage;internal stress;micro-crack;pore diameter;

氧化铝薄膜;电解电压;内应力;微裂纹;孔径;

75. Dependence of the Pore Diameter of the Alumina Film with Nano-Pore Structure on Anodizing Voltage

氧化铝薄膜纳米孔的孔径对电解电压的依赖性

76. Elementary Introduction to Color- Difference Control of Aluminum Profile Color Anodizing

浅谈铝型材阳极氧化电解着色的色差控制

77. Methods of Eliminating Black Stripes of Cast Aluminium Workpieces during Anodizing

消除铸铝工件阳极氧化膜黑斑的措施

78. Improvement of ceramic anodizing process in mixed acidic solution

混酸法瓷质阳极氧化工艺的改进

79. The wet process includes electroplating,electrolessplating,anodizing chemical conversion etc.The dry process includes PVD、 CVD、 Spray coating etc.

湿法有电镀、化学镀、阳极氧化及化学转化等。

80. Research of the Surface Oxide Film on Anodizing Ni-Cr Porcelain Alloy

烤瓷用镍铬合金阳极钝化处理的表面氧化膜研究