armco
armco
1. APPLICATION OF CONROLL~? TECHNOLOGY AT ARMCO AND ITS QUALITY INVESTIGATIONS
CONROLL~?技术在阿姆科的应用及其产品的质量研究
2. CRYSTAL GROWTH OF ARMCO IRON,ELECTROLYTIC IRON AND DILUTE SOLID SOLUTION Fe-Ti ALLOYS
Fe和Fe-Ti稀固溶体合金的晶体生长
3. armco iron
n. 磁性铁(工业用纯铁)
4. low carbon electrical steel and Armco iron
低碳电工钢和阿姆科铁
5. A STUDY OF THE TEXTURES OF ARMCO IRON BY MAGNETIC TORQUE METHOD
国产工业纯铁织构的磁转矩法研究
6. THE ROLLING AND RECRYSTALLIZATION TEXTURES OF ARMCO IRON
国产纯铁的轧制与再结晶织构
7. Keywords Armco iron;ion nickelizing;magnetism;
工业纯铁;离子渗镍;磁性;
8. Keywords Armco iron;RE-B-Al diffusion;microstructure;
工业纯铁;稀土硼铝共渗;组织;
9. 9.Borided layers on the surface of Armco iron and eutectoid carbon Steel were eutectified in furnace and then scanned continuously with laser beam of high power densities.
工业纯铁与共析碳钢表面渗硼层先在炉中处理,以获得共晶组织,然后以高能密度激光束扫描;
10. THE RECRYSTALLIZATION AND MAGNETIC PROPERTIES OF ARMCO IRON
工业纯铁的再结晶与磁性
11. The Structure of Ti Ion Inplanted in Armco Iron and Laser Treatment
工业纯铁离子注Ti层激光加热前后的组织结构
12. Application of Ion Nickelizing in Armco Iron by Double Glow Discharge
工业纯铁离子渗镍及其应用研究
13. Microstructure of RE-B-Al Diffusion Layer of Armco Iron and the Formation Mechanism of Borides
工业纯铁稀土硼铝共渗的渗层组织及硼化物的形成机理
14. Using x-ray and TEM, the structure of ion implanted in armco iron with 60KV. 5
本文用X-ray、TEM技术研究了60KV、5×10~(17)Ti~+/cm~2注入工业纯铁表面后经CW CO_2激光加热前后的组织结构,同时,用AES对注入层的成分进行了分析。
15. This paper deals with the kinetics of the ion nitrided layer growth for armco iron, steels 45, 40Cr, 42CrMo and 38CrMoAl.
本文研究了在不同离子渗氮工艺参数下,纯铁、45钢、40Cr、42CrMo及38CrMoAl钢等五种材料的离子渗氮层长大动力学,建立了长大动力学的数学模式。
16. This paper deals with the affact of carbon concent in steels on plasma surface alloying of W-Mo by the double glow dis charging plasma alloying at surface of samples of Armco iron 20#, 45# and T8steels.
本文通过对工业纯铁、20钢、45钢、T8钢进行双层辉光离子W、Mo共渗,探讨了钢中含碳量的影响。
17. The adsorption behaviour of thiourea (TU) on Armco iron was investigated in 0.5mol.
本文通过测定Armco铁在0.5mol.
18. Keywords severe rolling;nanocrystallization;armco iron;wear behavior;
深度轧制;纳米化;纯铁;磨损行为;
19. This paper is concerned with the process of the layer formation boronized on armco iron by gas boronizing by means of the method of X-ray.
渗硼层的形成机理,一直是渗硼研究的重要课题。 本文主要采用X射线法对用气体法在工业纯铁上形成渗硼层的过程进行了研究。
20. A NOTE ON COATING OF SURFACE DIFFUSIONINFILTRATION OF RE ON STEEL 20 AND ARMCO IRON BY CHEMICAL PROCESS
用化学法对20钢、纯Fe表面扩渗稀土元素的研究
21. The crystal growth of Armco iron,electrolytic iron and dilute solid solutionalloys,Fe-0.05wt-%Ti and Fe-0.5wt-%Ti,has been investigated by the strain-annealtechnique.
用应变退火法研究工业纯Fe、电解纯Fe,Fe-0.05wt-%Ti和Fe-0.5wt-%Ti合金的晶体生长.
22. A study of the preferred orientations and microstructure of armco iron after cold reduction and recrystallization has been made.
用极固与金相研究工业纯铁的轧制与再结晶织构和组织。 热轧后的试样经过两种冷轧方法：(1)压下率为98.8%，与(2)压下率为64.5%，中间700℃熟炼；
23. The distribution of boron and alloy elements in the boronized layer on Armco iron, steel 45, tool steel Cr12Mo, Cr26Mo or stainless steel Cr18Ni9Ti has been determined by a newly developed analytical method GDOS.
用辉光光谱分析测出了纯Fe,45钢,Cr12Mo工具钢,Cr26Mo和Cr18Ni9Ti不锈钢的渗硼层中硼与合金元素的分布规律。
24. Armco culvert
皱纹铁管涵
25. The effect of CW CO2 laser beam irradiation on nitrogen ion-implanted ARMCO iron specimens has been studied in this paper.
研究了工业纯铁离子注N后的连续CO_2激光热处理效应。
26. ADSORPTION OF THIOUREA ON ARMCO IRON IN SULPHURIC ACID
硫酸中硫脲在Armco铁上的吸附行为
27. Armco magnetic iron
磁性铁
28. Effect of Rare Earths on Kinetics of Boron-Aluminizing of Armco Iron and computer Fitting
稀土对工业纯铁共渗硼铝动力学的影响及计算机拟合
29. Keywords Equal channel angular pressing;Armco iron;Route of ECAP;Ultimate tensile strength;Elongation to failure;
等径角变形;工业纯铁;挤压方式;抗拉强度;延伸率;
30. Laser heat treatment on nitrogen ion-implanted ARMCO iron specimens
纯铁离子注氮后的激光热处理
31. Wear Behavior of Nanocrystallization of Armco Iron in Dry Sliding and Lubricating
纳米化纯铁在干摩擦及油润滑条件下的磨损行为研究
32. Nanocrystallization of Armco iron by severe rolling exhibited high sur1ce activity but it exhibited low shear force due to its poor plasticsity.
经深度轧制后，纳米化纯铁具有较高的表面活性，但同时由于塑性的丧失只能承受较小的剪切力。
33. The experimental results of Armco iron, copper, cermet and graphite are given.
给出了Armco铁、铜、金属陶瓷和石墨的测试结果。
34. armco aluminized steel
表面浸镀铝钢 阿姆柯渗铝钢
35. In this paper, the diffusion coefficients of the ~(14)C in austenite of armco iron specimens vari-ously cold deformed were investigated by using the radioisotope technique, and it was autora-diographed on the carburization surface layer.
采用放射性同位素技术测定了在渗~(14)C过程中~(14)C在不同量室温形变工业纯铁奥氏体中的扩散系数,并对渗层进行自射线照相。
36. The effect of rare earths on the kinetics of boron-aluminized layer growth of armco iron using Pasty method at 890, 920 and 950 t was studied.
采用膏剂法在890，920和950℃对工业纯铁进行稀土硼铝共渗及硼铝共渗，考察了稀土在各温度条件下对渗层生长动力学的影响。
37. This paper deals with RE-B-Al diffused into the armco iron using pasty method.
采用膏剂法对工业纯铁进行稀土硼铝共渗，观察了渗层组织，探讨了硼化物的形成机制。
38. Armco 48 alloy
阿姆柯48软磁性合金
39. Armco process
阿姆柯冶炼法
40. armco steel
阿姆柯软钢 不硬化钢
41. Armco stabilized steel
阿母柯稳定化钢
42. Armco Steel et al,46 a 1972 case in which such a claim was made, was unsuccessful.
）诉钢铁商（ArmcoSteeletal）一案提出了一个并不成功的主张。
