billets
billets
1. Mix in Mn bedspring billet have 20Must or carbolic knot steel, mix in wire rod 20Must is waited a moment.
Mn弹簧钢坯中混有20Must或碳结钢，盘条中混有20Must等等。
2. It is considered that medium thick slab or sheet billet should be adopted for various users' demands in continuous casting and continuous rolling of hot strip in VAI.
VAI公司的热带钢连铸连轧基于不同考虑分别主张采用中厚板坯或者薄板坯，文中介绍了VAI的技术思想的特点和热带钢连铸连轧生产线配置方案。
3. "If the squadron deploys, you are right there with them,filling USAF billets and jobs.
“如果中队执行作战部署，你会跟这帮美国人一起去执行，跟美国空军空勤人员做一样的工作。”
4. The Leibstandarte, Das Reich and Totenkopf Divisions were pulled back to billets in Kharkov and neighbouring towns, which only a few months before had been battlegrounds.
“警卫旗队”师，“帝国”师和“骷髅”师撤回了在哈尔科夫和附近城镇的兵营，不到1个月后他们将会重返战场。
5. Less orders were placed for products which were closely depended on the investment climate, such as billet, rolled steel, refined oil and plastic in primary form.
与投资密切相关的钢坯、钢材、成品油、初级形状的塑料等原料性商品进口量均下降。
6. The steel export even saw a steep shrink at the same time, with billet steel falling by 97% YoY.
与此同时，钢材出口量急剧萎缩，钢坯的出口量与去年同期相比更是下降了97%。
7. Through the combination with actual production and optimization of seconday cooling system,billet quality has been improved obviously.
与现场生产实际结合,优化二次冷却制度,铸坯质量得到明显提高。
8. A group of temporary billets for troops.
临时营房一组供部队使用的临时性营房
9. For high-efficiency casting and variety development, silica insulation plate was replaced by basic dry lining material in the working layer of billet caster tundish.
为适应高效连铸和开发新品种的需要,邯钢第三炼钢厂方坯连铸中间包工作层用碱性干式自流料取代了硅质绝热板。
10. The paper introduces the billet production and existing problems of Q195 steel. Through practice, corresponding measures had been taken to gain good results.
介绍了Q195钢小方坯生产的情况和存在问题,并提出了相应的解决办法,通过实践取得了较好的效果。
11. Application status of a new homemade coating for steel billet in high temperature dynamic process was introduced.
介绍了一种自主开发的动态过程钢坯高温防氧化涂料的应用状况。
12. Presented here is a general view of the trial production of CC billets for pipes in Russian Volga steel Tube works.
介绍了俄罗斯伏尔加钢管厂管坯连铸机试生产的概况。
13. The working principle of automatic hydraulic billet shears in continuous-casting steel line was introduced.
介绍了全自动液压钢坯在线剪的工作原理。
14. Author introduced furnace Construction Lining building and dry at a fire of walking beam heating furnace heats plate billet both up and down heating.
介绍了加热板坯用上下供热步进梁式加热炉炉型结构概况、炉衬施工及烘烤技术。
15. The paper introduces internal quality problem of CC billet after commissioning and reasons of rolled pipe infolding and solution.
介绍了包钢连铸坯在投产初期主要存在的内在质量问题及所轧钢管产生内折等缺陷的对应原因和消除方法的探讨。
16. The key works and the process characteristics.technique parameters,billet quality and improvement ofcontinuous casting for bearing steel in developed countries are introduced.
介绍了国外采用连铸工艺生产轴承钢的主要公司和厂家的有关工艺特点和参数以及铸坯质量和改进措施。
17. The improvement of immersion nozzle in square billet caster is introduced,the result extinguished.
介绍了邯钢方坯连铸机浸入式水口的改进,保护浇注效果显著。
18. Surface defect and macrostructure of high carbon steel billet were analyzed.
介绍了铸坯相关表面缺陷及低倍组织,提出了质量控制措施及方案。
19. The article introduced the process of high -efliciency of billet CC. at 4# of Changgang and analysed the effects and exsiting problem, the way is sovled.
介绍了长钢4号机高效化改造的过程,改造后的效果及存在的问题、解决的办法。
20. The process optimization for No.3 Billet Caster at Converter Plant which improves the production stability and strand quality has been introduced.
介绍转炉炼钢厂优化3号方坯连铸机的生产工艺,使生产稳定性提高,铸坯质量得到改善。
21. The aluminum billet homogenizing, extrusion cooling, profile ageing also effect the hardness and resistance characterristics of aluminium profiles.
从铝棒的均质、挤压后的淬火、铝材的时效处理都影响到铝型材的硬度和抗冲击性能。
22. Lucie shuddered as he threw two mo`re billets into his basket, but it was impossible to be there while the wood-sawyer was at wo`rk, an`d not be in his sight.
他又把两段木柴扔进篮子，露西打了个寒颤。要想在锯木工工作时到那儿去而不被他看见，是不可能的。
23. He landed a lucrative billet with a publishing house.
他在一家出版社里谋到一个报酬很高的职位。
24. He wasn't fond of the scene, which reminded him more of a recreational campground than the billet it was supposed to be.
他并不喜欢这个场景，因为这让他想到更多的是娱乐性的野营而不是应有的兵舍。
25. The above figures for the number of finished steel output of Letters (not including coMModity billet), eventually the data in the company's periodic reports shall prevail.
以上数据为成品钢材产量快报数(未包括商品钢坯)，最终以公司定期报告中的数据为准。
26. The commercial 7A04 alloy as-extrusion was employed as raw material, and SIMA method (strain induced melting activety) was used to obtain semi-solid billet.
以挤压态7A04合金SIMA法生成触变组织为例,研究变形程度对其半固态触变组织的影响。
27. It is found that the surface temperature of the billets fluctuates drastically under the conditions of original water distribution.
优化配水后的工业试验结果表明,通过凝固模型计算优化后的二冷配水可以降低中心碳偏析,提高连铸坯低倍质量。
28. Because of using rectangular billet in traditional production process of welded pipe, the barb, faulty soldering and formations of agglomerated ball etc.
传统焊管因采用矩形坯料使焊缝存在毛刺、虚焊、焊缝起镏等,影响产品质量。
29. But later problems occurred, for instance, secondary melting iron for steelmaking, dispatching billet for steelrolling are backward in the domestic metallurgical industry.
但在以后的发展中存在一定问题,如:二次化铁炼钢、调坯轧材,在全国冶金行业中处于落后状态。
30. However,the existing hot-centering machine failed to get the billet centered satisfactorily due to the fact that its positioning was not accurate.
但是原有的热定心在使用过程中发现,其定心位置不准,与棒料中心偏差较大,无法达到定心的目的。
31. But it hasn't the report about this new technology of the continuous casting square billet made well applied in large-scale industrialized .
但连铸方坯的热送直轧新工艺在大规模工业化生产中的应用我国迄今仍未见有成功的报道。
32. Billet Pusher qua the main equipment of the high speed wire rod mill stands,have occurred a lot of failure in several years ago.
作为高速线材轧机主体设备的推钢机,多年来故障频繁。
33. Under this condition, the tailormade billet could be produced by make corresponding change on the descending velocity o...
依靠调整接收基板的下降速度可获得预定外形尺寸的圆锭。
34. Letter steel products for a variety of leading brands of pig iron (BF ferromanganese), billet, bar strip.
信钢主导产品为各种牌号的生铁(高炉锰铁)、钢坯、棒带材。
35. There are microcrack and microhole in them.The radical cause is serious segregation of continuous cast steel billets.
偏析带组织为非索氏体，其强度高，塑性差，在轧制过程中易产生微裂纹和孔洞；
36. This paper introduces the after high efficiency revamping and increasing productivity,Converter billets continuous caster has tendency of interior crack of billets.
八钢转炉炼钢厂小方坯连铸机在经过高效化改造后产能有较大的提高。
37. The cause to the longitudinal crack at the comer of CC billets of Xinyang Iron &Steel Co.,is analyzed and measures to control and solve the defect proposed.
分析了信钢小方坯产生角部纵裂的原因,并提出了控制与解决措施。
38. The paper analysed the causes of longitudinal comer crack of CC Billets of Xinyang Iron&Steel Co. and proposed the measures to control and solve the defect.
分析了信钢小方坯产生角部纵裂纹的原因,提出了相应的控制措施及解决方法。
39. This paper analyzes the reason that caused the surface defect of billet produced by EAF Steelmaking plant of Nanjing Iron and Steel Co.Ltd.
分析了南(京)钢电炉厂小方坯表面质量问题及产生的原因,涉及结晶器振动参数、保护渣等。
40. The reason of shrinkage in billet is analysed. The improvement measurement is put forward and the operation shows good results.
分析了小方坯缩孔产生的原因,提出了改进措施,通过实施取得明显效果。
41. The all kinds of factors that affecting the testing of hot-charging and hot direct charging billets and countermeasures were introduced.
分析了影响柳钢热装热送方坯检验的各种因素,制定相应的措施。
42. The prinsiple requirements for cavity shape and structure of CC mould are analysed,the development and process result of billet CC mould discussed.
分析了连铸结晶器型腔形状和结构设计的基本要求，讨论了小方坯连铸结晶器的发展以及取得的工艺效果。
43. The cause of formation of off - squareness of billet in high speed casting is analysedand the countermeasures for it are put forward in this paper.
分析了高拉速条件下方坯连铸脱方缺陷产生的原因，提出了抑制脱方及进一步提高拉速的措施。
44. Research on the Reforming Technology of Small Billet Caster of Baotou Steel Corp.
包钢小方坯连铸机改造工艺研究。
45. Design and Research of the Billet Bidirectional Hot-centering Machine of the Seamless Tube Plant of Baotou Steel Corp.
包钢无缝厂管坯双向热定心机设计与研究。
46. The Synergy N9 rotor head features composite blade grips and a CNC billet aluminum head block.
协同n9旋翼头特点复合刀片枪柄和数控方坯铝头座.
47. Detailed Product Description Our main products are stainless steel ingots, billets, bars, mother ...
发布者：戈晓华所在地：上海浦东新区行业：建筑、建材职位：外销员工作年限：三年以上
48. Titanium bars &billets Designation: Gr.1, Gr.2, Gr.3, Gr.4, Gr.5, Gr.7, 6Al4V, 6Al4V ELI Spec...
发布者：文锐所在地：陕西宝鸡市行业：冶金矿产职位：外销员工作年限：一年以上
49. On the other hand, the demand for finished goods as a result of the reduction of scrap and billet steel procurement activ ities has been suspended.
另一方面，由于产成品需求的降低，钢厂对废钢和方坯的采购活动已经暂停。
50. Hardenability testing shall be carried out by Jominy testing at the billet stage in accordance with BS 4437.
可淬性测试应按照BS 4437在坯料阶段由Jominy测试进行。
51. At the same time, this will ensure a stable supply of high quality billets for the Group.
同时亦可令集团得到更稳定和质量更佳的铝棒供应。
52. The influence of multislit rolling on the conroll of bar steel bas been analysed from balancing of matter flow, the linking of tEe processes and matching of billet 's temperature.
同时，从物流衔接、工艺衔接、温度衔接等方面分析了多线切分轧制对棒材连铸连轧的影响；
53. Rear Hub : Proprietary CNC billet aluminum.
后方枢纽:专有数控铝坯.
54. This paper reviews the development of tube mould for billet casting at hame andabroad, and puts emphasis on the development orientation.
回顾了国内外管式结晶器发展状况，并着重论述了管式结晶器的发展方向。
55. According to heredity of segregation of continuous cast steel billets, effective measures have been taken against segregation.
因此，针对连铸坯偏析的遗传性，制定了改进措施，经生产证明其效果显著。
56. Breakout of molten steel in billet continuous casting occurs frtquently.
在小方坯连铸生产中，漏钢事故经常发生。
57. On basis of the early work [1],the computation,design and construction of the compacting dies for metal powder billet have been described.
在文献[1]的基础上，叙述并归纳了金属粉末钢模压制成形坯及相应的压制模具结构的设计与计算方法、内容和步骤；
58. It was shown that with the M-EMS intensity increase, the central carbon segregation in billets decreased, but the negative segregation near the edge in billets became worse.
在结晶器电磁搅拌条件下,随着二冷比水量增大,中心碳偏析减小;
59. The mathematical model of wire cool controlled rolling based on the analysis of thermal process of billet after being discharged is established.
在详细分析钢坯出炉后热过程特点的基础上,建立了线材控冷轧制热过程数学模型。
60. In continuous cast billet, the center macrosegregation is a kind of very harmful defect, especially for high-carbon steels.
在连续铸钢生产中,尤其对高碳钢,中心偏析是一种常见的有害缺陷。
61. The old mansion serve as the soldier ' billet for a week.
士兵在那所古宅里住了一个星期。
62. Soldiers were billet ed in all the houses of the village.
士兵被分配到全村的老百姓家里住宿。
63. A type of new slide rails with holes have been designed in order to solve"black-mark"of billet when it was heated.
孔洞式热滑轨是为消除钢坯在加热时产生的黑印而设计的一种新型滑轨,并在实际应用中取得了良好的效果。
64. It purchased a used ladle furnace and billet caster from Societe Metallurgique de Normandie in France.
它从法国诺曼底的一家公司手里购买了一套精炼炉和铸压机。
65. CAUSES OF CRACK FORMATION OF CONTINUOUS CASTING BILLET AND PRECAUTIONARY MEASURES AT ANYANG IRON AND STEEL CORP.
安钢连铸小方坯裂纹形成的原因和预防措施。
66. Practices in plant show that hydro-oxygen flame can be used discretely in billet cutting and it has remarkable econmical benefit.
实践表明氢氧焰完全可以实现断火切割,并且经济效益显著。
67. It proved in practice that the radiaters has an effect on improvement of billet heating quality and reduction of fuel consumption.
实践证明：辐射传热体对改善钢坯加热质量、降低燃耗有较好的效果。
68. In fact, the true ancestors of modern paper money were the billets printed in France in 1916 by Scottish financier John Law.
实际上，现代纸币的真正祖先是1916年，由苏格兰金融家约翰.劳在法国印制的小汇票。
69. This paper analyses the causes of breakout after modification of Demag continuous billet caster and puts forward the preventing measure. The remarkable effects have been obtained.
对德马克型连铸机改造后漏钢事故频繁发生的原因进行分析,提出改进措施,取得了较好的效果。
70. Five strand billet caster at Xining Special Steel Group Co.was revamped with improved functions.
对西钢新建生产线五机五流小方坯连铸机改造进行了综述。
71. Billet: similar to a bloom, but up to 15crux 15cm in size.
小方坯--与大方坯相似，但最大尺寸不超过15cm×15cm。
72. The re-equipped autotruck for transporting hot square billets is applied.The results show that the heat preservation performance is good and loading or unloading is convenient.
应用改装后的方坯热送车运送热钢方坯的结果表明，车厢保温性能良好，装卸方便，能够满足使用要求。
73. A mathematical model depicting the initial solidification of the billet is built up and verified with the experimental data.
建立了描述小方坯初始凝固的三维数学模型,并用实验数据进行了验证。
74. It is recommended that research and development work about the special mould flux for the rare earth treated low carbon steel billets be carried out as soon as possible.
建议尽快进行稀土处理方坯低碳钢专用保护渣的研究开发工作。
75. A systematic mathematical model group has been developed to simulate the billet section temperature distribution, austenite structure evolution and products properties.
开发了用于模拟高碳钢高速线材生产过程中断面温度分布,奥氏体组织演变和产品性能的系统数学模型组。
76. We arrange with the townspeople to billet the students.
我们和镇上人协商给学生提供宿舍。
77. We want to buy Hot Rolled Round Bars, Plates, Sheets, Wire Rods, Coils, Strips, Billets, Metal Scraps.
我们要采购热轧轮酒吧，板，床单，线材，弹簧圈，带，坯料，金属废料
78. Je voudrais reserver deux billets de concert.
我想订两张音乐会的票。
79. Examined by the light of the lantern, this proved to be a folded paper-a billet.
拿灯笼仔细一照，原来是张折叠着的纸--一张字条。
80. After kneading good, retting pile, to be rubbing good tea billet Add to Lo or stacked on at night bazaar on retting heap fermentation.
揉好之后，进行沤堆，即将揉好的茶坯放入箩内或堆放在竹笪上进行沤堆发酵。
