cantilever

cantilever

1. Micro cantilever electromagnetic actuator is described.Numerical models about the magnetic force and displacement of the beam are established according to the electromagnetics principle.3.

3.建立了平面线圈磁场的数学模型,推导出电磁式微致动器悬臂梁的变形与致动器各个参数之间的关系,并进行参数匹配。

2. L-BS type cantilever beam load cell, with one end fixed, another end loaded, steel ball transfering force, it has a good sealed structure.

L-BS型钢制悬臂梁式称重传感器,一端固定、一端加载,钢球传力,并设有良好的密封结构。

3. Abstract:Concerning the specialty of the testing of stressed skin diaphragm assembly, the current loading method of cantilever beam test is improved by the diagonally loading method.

[提要] 考虑受力蒙皮组合体试验的特殊性，对普遍采用的悬臂梁式加载方式进行了改进，提出沿对角线加载的方法。

4. Compared with traditional electrostatic cantilever actuators, this device can control the deflection of the beam more accurately.

与传统的静电驱动悬臂梁执行器相比，新的结构能更精确地控制梁的挠度。

5. The optimal parameters for a cantilever piezolaminated beam are analytically obtained to ensure the free end displacement to remain zero.

与有限元结果比较表明：本文的理论模型能够模拟压电激励的小曲率圆形曲梁的静态响应。

6. By reviewing relevant literatures, it is known that the design model is similar to the cantilever beam structure.

中文摘要植牙术后的骨整合程度，关系到手术是否成功。

7. To guide the application of an active balancing device in industrial cantilever rotors,a cantilever rotor test stand was set up to perform an experimental study of active balancing technology.

为了指导主动平衡装置在工业悬臂转子上的应用,搭建了悬臂转子实验台进行主动平衡实验研究工作。

8. The explosives can be detected for the impact force of their deflagration with the modified cantilever.

为了更进一步提高检测灵敏度，本文还提出了一种改进型悬臂梁的研制。

9. In order to study the effect of web openings on the behavior of composite beams under negative moment,three perforated and one unperforated cantilever composite beams were designed and tested.

为研究腹板开洞对负弯矩区组合梁受力性能的影响,对三根腹板开洞外挑组合梁和一根对比梁进行了试验研究,考虑是否开洞、洞口大小、洞口补强等参数的影响。

10. DC-contact series radio frequency(RF) micro electromechanical system(MEMS) switch with slanting beams was developed to eliminate warping of the cantilever beam due to residue stresses.

为解决悬臂梁结构的射频微机电系统开关在残余应力的作用下会发生翘曲的问题,提出在悬臂梁的顶端引入斜拉梁的方法。

11. The cantilever microbeam is chosen as an example of illuminating how to extract the compact model.

主要描述了微机械器件宏模型的构建问题。

12. The products need not rotate, but the cantilever of the machine do, it is suited to those products not stable in piling.

产品不必旋转，由机械本身悬臂来缠绕，适合堆积较不稳之产品使用。

13. The paper introduces a new kind of the cantilever bar screening machine,and dissertates its structure,working principle and technical characteristics.

介绍了一种新型悬臂棒条筛分机械,论述了其结构、工作原理和技术特性。

14. This paper introduces the cast in place cantilever construction technology used in uncontinous box beam of the Hanchuan Hanjiang River Bridge.

介绍汉川汉江公路大桥非连续段箱梁的悬臂现浇施工技术，可供有关工程技术人员参考。

15. Based on crack width check formula,equations calculating the diameters of verticalreinforcement in random section of cantilever retaining wall are deduced.

从裂缝宽度验算公式出发,推导出计算悬臂式挡墙任意截面竖向钢筋直径的方程式。

16. A cantilever beam was experimentally studied with this method and the result is consistent with theoretical result.

以悬臂梁为例进行实验研究，实验结果与理论计算结果吻合较好。

17. The optimum results show that the displacement of the last move node of the cantilever beam within the optimum inductance and resistance is lower than that without these.

优化结果表明，当电感和电阻为最优值时，动端点的振幅都比其他情况下的振幅小；

18. To extend outward as or in the manner of a cantilever.

作为一条悬臂向外延伸或以悬臂的方式向外延伸。

19. to construct as or in the manner of a cantilever

作为一条悬臂或以悬臂的方式建造

20. To construct as or in the manner of a cantilever.

作为一条悬臂或以悬臂的方式建造.

21. As an example, the frequencies of a composite laminated cantilever plate are calculated.

作为例题，计算了复合材料悬臂层合板的频率。

22. The utmost surmounting gradients at different parameters of cantilever position are figured out.Meanwhile, according to the calculation results, the parameters of the vehicle are optimized.

使用按比例缩小的实验车数据，计算了不同悬臂位置参数下的极限越障坡度，同时根据计算结果，对相关参数进行了优化；

23. A tipless cantilever was used to measure the elastic modulus of the single voxel with the ellipsoid shape.

借助于原子力显微镜，选用无针尖探针对成型点的力学性能进行了测试，建立了椭球-平面接触的弹性力学模型。

24. The LEV employs an electric drum brake that, Ni claims, stops it faster than the cantilever brakes used on garden-variety electric bikes could.

倪捷解释道：LEV装有电鼓闸，它的刹车效果比各种各样电动车常用的悬臂闸要好得多。

25. The company mainly produces "a long fly" card Bridge, gantry crane, the cantilever crane, CD1, MD1, BCDS, HB-explosion-proof electric hoist, and so on.

公司主要生产“长飞”牌桥、门式起重机，悬臂起重机、CD1、MD1、BCDS、HB型防爆电动葫芦等。

26. Cantilever beam of key strata breaks and caves into blocks,which is periodic weighting of mining face.

关键层悬臂梁破断垮落成承压砌块,其垮落及沿架后切落,形成工作面周期来压。

27. The result shows that distribution of displacement and stress of the cantilever will theoretically benefit to the prediction of stiction or fracture ...

其结果可为预测悬臂梁的断裂失效和粘附失效提供理论基础,为悬臂梁的设计提供参考。

28. The construction approach is to use the cantilever launching method of the Bailey trussed girder to conduct the hoisting of the steel arch bridge with simple low-speed hoister and manual mini-cranes.

具体的施工方法就是利用贝雷桁架梁,拼装成双导梁架桥机,加上简单的慢速卷扬机和手拉葫芦等装置,就可以进行钢架拱桥的吊装。

29. The front-wing structure of the cantilever can effectively inhibit the optical perturbation in the electrical scanning probe microscopes and obviously promote the analysis accuracy thereof.

具有前翼结构之探针悬臂可有效抑制光扰效应，大幅提高分析结果的准确度。

30. Thirdly, IMSC, pseud-sliding mode variable structure and modeling of cantilever flexible plates were discussed.

再次，论述了独立模态空间控制方法和准滑模变结构控制方法的基本理论及悬臂薄板的模型建立方法；

31. Plants and equipment for warehouses, cantilever shelving, pallet racking systems, mezzanines &...

分类标题：办公室书架和分类系统|仓库物流管理...

32. The large deflection problem of cantilever beams is studied by means of pseudolinear approach and the result is compared with that by algorithm of nonlinear governing equation.

利用拟线性分析方法,研究了悬臂梁的大挠度问题,并与该问题的双参数摄动算法进行了比较。

33. The large deflection problem of cantilever beams was studied by means of the biparametric perturbation method and the first order derivative substitution from pseudolinear analysis approach.

利用拟线性分析方法中的一阶导数代换对基本方程进行了简化处理,将基本的微分积分方程转化为非线性代数方程组,并结合双参数摄动研究了悬臂梁的大挠度问题。

34. Chic dome light, brought a happiness. Especially cantilever and the television of buy, let husband and wife the life of two is richer!

别致的顶灯，带来了一份甜蜜。尤其是悬臂而置的电视机，让夫妻俩的生活更充实了！

35. With hoisting method by double cantilever beam,the hoisting of large steel trusses was get success.

双悬臂梁吊装法解决了大型钢桁架高空吊装问题,且省工、省料,实践证明,该法安全、可靠,较为实

36. With hoisting method by double cantilever beam,the hoisting of large steel trusses was get success.The practices demonstrated that the hoisting method was reliable and feasible.

双悬臂梁吊装法解决了大型钢桁架高空吊装问题,且省工、省料,实践证明,该法安全、可靠,较为实用

37. A cantilever bracket shown in Fig.3-1 might be quite helpful.

图三所示的的悬臂支架可能会很有帮助。

38. In 1928, Freysinet used the cantilever concept to construct the springing of the arch rib in the Plougastel Bridge.

在1928年,弗莱西奈运用悬臂的概念,在德国普鲁加斯泰尔桥修筑了拱桥的起拱部分。

39. In 1928, Freysinet used the cantilever concept to construct the springings of the arch rib in the Plougastel Bridge.

在1928年，弗莱西奈运用悬臂的概念，在德国普鲁加斯泰尔桥修筑了拱桥的起拱部分。

40. The idea of cantilever construction is ancient in the Orient.

在亚洲古代就已实行过悬臂施工。

41. Piezoelectric elements were pasted on/under the cantilever beam where stress was the maximum or sub-maximum as actuators to control the vibration of the cantilever beam.

在悬臂梁振动时应力最大或次最大处的上、下表面同位元配置压电片，作为抑制悬臂梁振动的致动器。

42. Deformation modulus for dam foundation rock must be de termined reasonably when stress in dam is analyzed with arch and cantilever tria l load method .

在拱梁分载法坝体应力分析时，需要合理确定坝基岩体的变形模量值。

43. twin cantilever bridges across the Mississippi at New Orleans.

在新奥尔良地区横跨密西西比河的两座悬臂桥。

44. The PZT films had piezoelectric properties without poling.The PZT films could actuate cantilever specimen linearly.

在机械性质量测方面，PZT 膜可有效的驱动悬臂梁在模态下振动，且具良好的线性特性。

45. A displacement-based deformation capacity design method was then developed for RC cantilever walls, with an expression for the stirrup characteristic value for a specified drift demand.

在此基础上，提出了RC剪力墙基于位移的变形能力设计方法，得到了RC剪力墙在不同位移角要求下配箍特征值的计算公式。

46. Vertical elements carry sufficient load through cantilever action to produce cantilever deflections equal to arch deflections.

垂直杆件则借悬臂作用产生和拱挠度相等的悬臂挠度，来承担足够的荷载。

47. This paper presented an on-chip integration of SOI (Silicon on insulator) CMOS analog IC and piezoresistive cantilever based on the techniques of MEMS and SOI CMOS.

基于MEMS技术和SOI CMOS技术提出了一个包含放大电路与悬臂梁式压阻传感器的集成化方案。

48. A piezoelectric SSA is implemented based on a strain rate bridge circuit and exhibits excellent performance in suppressing the vibration of a cantilever.

基于应变速度电桥电路制成了压电陶瓷自感知执行器，实验表明能有效抑制悬臂梁的振动。

49. Based on the theory of elasticity, the exact solutions of functionally gradient piezoelectric curved cantilever were obtained.

基于弹性力学理论，得到了弯曲型样度功能压电悬臂梁在受电场作用时关于力和电场的解析解。

50. An impact type of grain flux sensor, based on strain-gauged cantilever, is independent of species and moisture of the grain, moreover, it can be mounted on a combine easily.

基于悬臂梁受冲击力变形原理开发的联合收获机冲量式谷物质量流量传感器,在应用中测量精度易受到收获机基础振动的影响。

51. Most cantilever bridges have two arms of truss structure that meet or support a section between them.

大多数悬臂桥都有两个桁架臂用以对接或支撑两臂之间的桥段。

52. Approximately one-third of the span from the pier may be erected by the free cantilever method.

大约三分之一的跨长可以由一个桥墩起靠自由悬臂的方法向前架设。

53. Sun, with its unique "cantilever" the spirit of hard science, will be able to pass this Bogut, full argued and became well-known Daru.

孙敬凭借其独特的“悬梁”精神苦学，终能通今博古、满腹经纶，成为当时的知名大儒。

54. It includesten modules for the analysis and design of multi-span and cantilever beams, laterally loaded columns, floor joists, roof rafters, rectangular footings and continuous footings.

它包括10中模型用于分析和设计多指距和悬梁，侧面安装栏，地板托梁，屋顶椽，成直角的地位和连续的地位。

55. A complete cantilever mounting solution. Includes both the Plasma Cantilever and the UM-1 Universal adapter.

完整的悬臂支架方案,包括等离子悬臂支架及UM-1A接合器。

56. Comparison shows that the AFM images obtained under the liquid phase condition exhibit the fine structures of the objects due to the reduction of the broadening effect of the AFM cantilever.

实验结果分析表明液相条件可以降低针尖的展宽效应，使得形貌成像更能够显示出物体的细微结构。

57. The experiment results show that the vibration of flexible cantilever beam can be effectively suppressed by using the independent mode control method.

实验结果表明,使用独立模态控制方法,能有效地抑制悬臂梁的振动,控制效果非常明显。

58. The experiment result shows that the compensation of convex corners and short corners of cantilever beam in EPW by the method.

实验结果表明，该方法能够较好的完成对EPW腐蚀液中悬臂梁凸角削角的补偿。

59. Experiments show that an isolator which employs a combination of coulomb and viscous damping is avery simple and effective device, it can considerably reduce the vibration level of a cantilever structure.

实验证明同时具有干摩擦与粘性阻尼之隔振器是一种简单而有效的设备,它能够显著地降低悬臂结构的振动水平。

60. Through analysising cantilever beam’s strain, we obtain accurate location and direction where CFG is pasted.And determine the best pasting and fixation means.

对0-20吨压力传感弹性体进行的受力分析得出CFG正确的粘贴位置和方向，并确定了最佳的粘贴和固定方法。

61. This paper analyzes the success application influence factors about the roof caving technology of cantilever support and summarized it's main factors.

对影响悬移支架放顶煤技术成功应用因素进行了系统分析,并总结出了其主要影响因素。

62. Some suggestions of cantilever installation of steel box shaped girder are given.

对悬拼法钢箱梁安装提出了一些有益的建议。

63. The priming pressure, static and dynamic characteristics of cantilever microvalve are analyzed to obtain the relationship between geometrical size, static pressure difference and flow rate.

对悬臂梁式微型阀的启动、静态和动态过流特性进行了分析和模拟。得到了微型阀的启动压力和静态下阀的流量与压差的关系以及阀片的几何尺寸对阀的流量的影响。

64. A transversal centre load applied on a cantilever sheet has been treated, and bending de-flection equtions of cantilever sheet under transversal central loading was presented.

对悬臂矩形薄板上作用的横向集中力进行了处理，导出它在任意横向集中力作用下的挠度方程组。

65. The linetype of the arch bridge is controlled, and the primary plan of the cantilever hanged basket is brought out.4.

对拱桥的线形控制进行了分析，并提出了挂篮施工的初步方案。

66. Uncertain factors in construction of continuous girder bridge such as side span joint scheme and different balanced cantilever construction speed are analyzed.

对施工中的不确定因素,诸如边跨合拢方案和不同桥墩悬浇进度不一致等进行了分析比较。

67. The break of down right cantilever of an imported "Fei Ying" car is analysed from macro and micro viewpoint.The reason of break is determined.

对进口飞鹰牌轿车右下悬臂件的断裂问题进行了宏观分析，确定了其断裂原因。

68. The vibrating gyroscopic sensor element is mounted on the support substrate so that the first surface of the cantilever vibrator faces the support substrate.

将该振动陀螺传感器元件安装在该支撑基底上以使该悬臂振动器的第一表面面对该支撑基底。

69. Halfway up the Great Wall about 750 meters, long straight steep, magnificent momentum, pendants if the cantilever, it is "Western Badaling" known.

山腰长城约750米，陡峭直长，气势雄伟，垂若悬臂，故有“西部八达岭”之称。

70. A cantilever beam and Laxiwa dam-base system are analyzed in details by using proposed method.The results show that the 3D EFGM is effective and accurate for problems in geotechnique engineering.

应用该程序对悬臂梁算例和拉西瓦拱坝-地基模型进行弹性分析，结果表明该方法有效可行。

71. Frank Lloyd Wright liked to cantilever his buildings.

弗朗克·洛德·莱特喜欢把建筑物建成悬臂式的。

72. White SN , CaputtoAA, Ander KristT. Effect of cantilever length on stress transfer by implant supported prosthesis. [J] J Prosthet Dent. 1994May,71(5): 493-9.

张少峰,马轩祥,欧阳官等.种植全口义齿的应力分布特点.[J]实用口腔医学杂志，1997,13(3):194-57.

73. When it is stiffened, it will be sensed by the atomic force microscope cantilever, and you can see a bright line, which is a height increase.

当它变硬后,它就会被原子力显微镜的悬臂感觉到,你就能看到一条亮线,代表高度增加。

74. When completed the Forth Bridge broke all records in terms of length, height and quality of material used. It is still today the second longest cantilever bridge ever built.

当完工时,第四大桥打存了长度、高度和使用的建筑材料质量所有三个标准。至今它仍然是已建的第二长的悬索桥。

75. The plastic hinge model can also be used for the cantilever tapered castellated beam-columns when the axial compression ratio is below a certain value.

当轴压比较小时，悬臂楔形蜂窝压弯构件可以近似的采用塑性铰模型；当轴压比较大时，利用塑性铰模型分析是不合适的。

76. A movable temporary stay arrangement must be used to limit the cantilever stresses during construction to a reasonable level.

必须采用一个可移动的临时拉索装置将施工过程中的悬臂应力限制在合理的范围之内。

77. In general, the maximum allowable deflection / span ratio for the equipment is limited to L/250 (cantilever, during launching) and L/400 (simply supported, during erection / concreting).

总的来说最大挠度/跨度为L/250（悬臂端、推进时发生）和L/400（简支状态，起升及浇注混凝土时发生）

78. The cantilever taps across the surface with metronomic precision.But as it moves, it also behaves much like a tuning fork, producing overtones related to the fundamental vibration.

悬臂以精确的节奏轻触过物体表面，而悬臂移动时，就像是一个音叉，会产生与基本振动有关的谐音。

79. Cantilever Rack: It is mainly used for the storage of long figure goods and anomalistic goods.

悬臂式货架 悬臂式货架 适合存放长形或不规则货物。

80. Cantilever racking: special section steel post, high strength cantilever, it's mainly used for storaging long goods such as steel tube, etc.

悬臂式货架:专用型材立柱,配高强度悬臂,适于存放各种长形物料,如型材、管材、板材等。