cycloid

cycloid

1. A PHOTOELASTIC ANALYSIS ON THE FORCES ACTING ON GEAR TEETH OF THE CYCLOID DISK OF THE BW180 GYCLOID SPEED REDUCER

BW180摆线针轮行星减速器摆线轮轮齿受力的光弹性分析

2. Inverse Design Used to New FA Series Cycloid Drive

FA新型摆线针轮行星传动装置的反求设计

3. the FA cycloid drive

FA针摆传动

4. Parameterization of Cycloid Gear in FA Planetary Transmission of Cycloidal Needle- wheel

FA针摆传动摆线轮参数化设计

5. pseudo cycloid

n. 伪旋轮线

6. NMRV series worm reducer, 8000 series cycloid X.

NMRV系列蜗杆减速机,8000系列摆线X.

7. pressure filter with cycloid filter leaves

[化] 圆形滤叶加压叶滤机

8. cycloid type

[医] 周期型

9. The Design and Study of a New Type Hydraulic Motor with Planet Pinwheel Cycloid

一种新型的行星针轮摆线液压马达设计研究

10. CAD and dynamic simulation research on contour of vanes applied to three vaned cycloid pump

三叶摆线型泵用叶片廓线的计算机辅助设计及动态模拟研究

11. 3-sharp cycloid

三尖摆线

12. 3-sharp cycloid pump

三尖摆线泵

13. Three Keys Arc Cycloid Broach

三键圆弧摆线拉刀

14. keywords: Cycloid, Normal line, Pure rolling, Cycloid gear , Cycloid gear hob, Cycloid Pinion cutter, cycloidal gearing

不知道各位内行的大侠能告诉我翻译的内容是否准确，是否有需要修改的地方？

15. DERIVATION OF THE MAXIMUM DIMENSION FOR ROTOR PUMP WITH TWO-LOBE OR THREE-LOBE CYCLOID ROTOR

两叶与三叶摆线型转子泵尺寸极值的推导

16. To improve the transmission accuracy and stiffness of the ball cycloid reducer, the authors developed a novel cycloid ball reducer, which uses a full complement ball as its gear teeth.

为了提高摆线球齿传动的精度和传动刚度,研制了一种新型的摆线球齿传动。

17. Series of flexible rotor cycloid gear pump from the main rotor, outer rotor teeth, pump body and explosion-proof motors and other components.

主要由内齿转子、外齿转子、泵体和防爆电动机等部件组成。

18. OPTIMIZATION OF THE CURVE PARAMETERS WITHIN THE PIN GEAR HOUSING IN TWO TEETH DIFFERENCE CYCLOID SPEED-REDUCER

二齿差摆线针轮减速器针齿壳内曲线参数优化

19. The two teeth difference cycloid gear drive now is widely used in the small speedratio reductor transmission,especially during the heavy_power,transmission,small speedratio.

二齿差摆线针齿行星传动近几年来在小速比减速机上,特别是在大功率速比小范畴的使用过程中得到广泛的应用。

20. companion to the cycloid

伴旋轮线

21. ANALYSIS ON LOAD CHARACTERISTICS OF MESHING BETWEEN IMPROVED CYCLOID GEAR AND PIN TEETH OF CYCLOID PIN GEAR PLANETARY REDUCER

修正齿形摆线轮与针轮啮合时受力特性的研究

22. Keywords Two -teeth -difference cycloid disk;Common normal length measuring method;Measuring length calculation;

关键词二齿差摆线轮;公法线检测法;公法线长度计算;

23. Position of Support Force on Cylinder in Internal-Meshing Cycloid Rotary Compressor

内啮合摆线转子压缩机缸体支撑力位置理论研究

24. Modification of Profile for Internal-Meshing Cycloid Rotary Compressor

内啮合摆线转子压缩机齿型修正研究

25. internal cycloid diesel engine

内摆线柴油机

26. The vibration performance of cycloid ball planetary reducer was analyzed.

分析摆线钢球行星传动减速器的振动特性。

27. spinoid scale A cycloid scale bearing a serrated margin; superficially similar to ctenoid scales but having spines as outgrowths of the scale as oppose to true ctenii.

刺状鳞一种具锯齿边缘的圆鳞；表面上类似栉鳞，但其棘与鳞片自然长成的真实齿栉是相对的。

28. motional cycloid

动摆线

29. Keywords parametric curves;cycloid;interpolation;constant feedrate;

参数曲线;摆线;插补;恒速进给;

30. double-disc cycloid gear

双圆盘摆线轮行星传动

31. Keywords double helix single screw pump;short-amplitude cycloid;optimum model;

双头单螺杆泵;短幅内摆线;优化模型;

32. double cycloid

双摆线

33. The Backlash Adjustment Moment Analysis on Double Cycloid no Backlash Steel Backlash Steel Ball Trausmlssion

双摆线无隙钢球传动间隙调节力矩分析

34. Aanalysis and calculation of the vibration of K-H-V double cycloid ball planetary reducer

双摆线钢球行星传动减速器振动分析

35. Force analysis and efficiency calculation of planetary drive with double crank and double cycloid

双曲柄双摆线行星传动的力分析与效率计算

36. Moving Performance Analysis for Parallel Four-Bar Mechanism in Double Crank Ring-Plate Cycloid Drive

双曲柄环板式针摆行星传动中平行四杆机构运动性能分析

37. Parameter Optimization of Double Crank Ring-Plate Cycloid Drive

双曲柄环板式针摆行星传动的参数优化

38. Study of A Double Rank Four Ring-Plate Cycloid Drive Driven by Double Motors

双电机驱动双曲柄四环板式针摆行星传动研究

39. variable cross section cycloid gear

变截面行星轮

40. Thermal Energy Analysis of Double Crack Four Ring-Plate Cycloid

四环板式针摆行星传动减速器的热功率分析

41. Study of Cycloid Reducer with Circular Arc Gear Profile

圆弧针齿行星传动的研究

42. cycloid curve

圆滚线

43. cycloid pendulum

圆滚线摆

44. cycloid scale

圆鳞

45. A short-amplitude cycloid is used to be the primary gear form for stator and the conjuration gear form using on rotor on the basis of the analysis and compare of all kinds of cycloids.

在对各种摆线分析比较的基础上,提出采用短幅内摆线作为原始齿形曲线用于定子骨线设计,其共轭曲线用于转子的双头单螺杆泵设计。

46. On the theoretical basis of this paper, a sample prototype is designed and made.It provides practical base for further development of cycloid steel ball transmission.

在本文的理论基础上设计并制造了一台试验样机，为端面啮合摆线钢球行星传动的进一步开发提供了实践基础。

47. Based-DFMA assembling design of cycloid planetary reducer with needle rollers

基于DFMA的摆线针轮行星减速器的装配设计

48. THREE-DIMENSIONAL MODELING DESIGN FOR COMBINED GEAR FORM CYCLOID PAN BASED ON Pro/E

基于Pro/E的复合齿形摆线盘三维模型设计

49. Research on Fatigue Strength Reliability for the Cycloid Ball Planetary Transmission Based on Fuzzy Theory

基于模糊理论的摆线钢球行星传动接触疲劳强度可靠性研究

50. Vehicle Speed Estimation in Sideswipe Collision Based on Snippet Cycloid Scratched Marks

基于片断摆线擦痕的车速估计

51. Based on compounding cycloid track, a leg mechanism of a bipedal dinosaur was designed.

基于组合摆线运动轨迹设计了一种两足恐龙腿机构。

52. Research on the Transmission Accuracy for Cycloid Drive Based on the Nonlinear Analysis Method

基于非线性分析方法的摆线针轮系统传动精度研究

53. cycloid of multi - tooth difference

多齿差摆线

54. The many teeth difference cycloid gear drive now is widely used in the low transmission ratio and big power in kilowatt specifically.

多齿差摆线针齿行星传动近几年来在小速比减速机上，特别是在大功率速比小范畴的使用过程中得到广泛的应用。

55. Study on Performance of Cycloid Pinwheel Planetary Reducer with Parallel Axis

平行轴摆线针轮减速器性能的研究

56. The paper has built the optimum model as objective function of the smallest fluctuation and obtained the optimum structure of inner and outer rotor of cycloid gear pump.

建立了以“脉动量最小”为目标函数的优化模型，得出了摆线齿轮泵内外转子的优化结构。

57. An optimized design of cycloid pinwheel planetary reducer for an architectural jenny

建筑卷扬机摆线针轮行星减速器优化设计

58. Rsearch on Open CNC System for Cycloid Gear Grinder

开放式摆线磨齿机的数控系统研究

59. cycloid economy

循环经济

60. I have 26 plants in casting history, with 2 T cupola and one-ton furnace, casting pieces of machinery from sand, the main casting reducer tank shell and cycloid, kingpin Shanghai.

我厂已有26年的铸造历史，拥有2T冲天炉及1吨炉，铸造件机械脱沙，主要铸造减速器箱体及摆线的外壳，主销上海。

61. A new type of rotary compressor is discussed. Based on short frame outer cycloid that is selected as inner profile, the inner and outer rotor's outlines are analyzed.

探讨了一种新型内、外转子啮合的压缩机结构,以短幅外摆线的内等距线为内转子型线进行了典型分析,说明内、外转子型线的形成,并提出了一种工作容积的准确计算方法.

62. The cycloid has an isochronal pendulum.

摆线具有严格的等时摆。

63. cycloid reduction gear

摆线减速齿轮

64. Cycloid cam

摆线凸轮

65. Study on the Tooth Profile of Cycloid Cam Sliding Tooth Gearing

摆线凸轮活齿传动原理及齿形理论

66. cycloid pump

摆线泵

67. cycloid pump body

摆线泵泵体

68. cycloid motor

摆线电动机

69. cycloid pan

摆线盘

70. cycloid gear grinding machine

摆线磨齿机

71. cycloid helicoid

摆线螺旋面

72. Design in cycloid rotor pump

摆线转子式齿轮泵的设计

73. Non-undercutting Conditions for Small Rotor in Cycloid Rotor Pump

摆线转子泵小转子不根切的条件

74. The Work Principle and Characteristics of Cycloid Rotor Pump

摆线转子泵的工作原理及特点

75. Design Calculation of Cycloid Rotary Pump

摆线转子泵的设计计算

76. Forming of the rotor tooth profile of cycloid rotor pump

摆线转子泵转子齿廓的形成

77. cycloid gears

摆线轮

78. The Confirmation Of Cycloid Gear Mesh Jugged Operating Space

摆线轮啮合齿形工作范围的确定

79. Cycloid cam is key part of cycloid cam planetary speed reducer, and fu nction of speed reducer is based on its structure and capability.

摆线轮是摆线针轮减速器的关键零件,其结构与性能的优劣是减速器功能的决定因素。

80. Calculation of Common Normal Length of Cycloid Disks

摆线轮检测中公法线长度的计算和确定