cycloidal

cycloidal

1. Inverse Design Used to New FA Series Cycloid Drive

FA新型摆线针轮行星传动装置的反求设计

2. Parameterization of Cycloid Gear in FA Planetary Transmission of Cycloidal Needle- wheel

FA针摆传动摆线轮参数化设计

3. NMRV series worm reducer, 8000 series cycloid X.

NMRV系列蜗杆减速机,8000系列摆线X.

4. RV transmission is a new type of transmission developed on the basis of Cycloidal Gearing.

RV传动是在摆线针轮行星传动的基础上发展起来的一种新型传动。

5. pressure filter with cycloid filter leaves

[化] 圆形滤叶加压叶滤机

6. A Design Scheme of Cycloidal Gear Profile

一种摆线齿轮齿形设计方案

7. The Design and Study of a New Type Hydraulic Motor with Planet Pinwheel Cycloid

一种新型的行星针轮摆线液压马达设计研究

8. Three Keys Arc Cycloid Broach

三键圆弧摆线拉刀

9. And the time is the shortest for cycloidal path when the object moves along the different curve lines.

且得出不同曲线路径下摆线路径的运行时间最短。

10. The starch granule in two species of Fritillaria L. was in cycloidal or elliptic-shape.

两种贝母淀粉颗粒的形状是圆形的和椭圆形的。

11. To reduce the weight of the whole reducer, the FEA software ANSYS is adopted for the shape optimization design of the ring-plate in the double crank four ring-plate cycloidal pinwheel reducer and a good result is achieved.

为了减轻整机重量，采用有限元分析软件ANSYS对双电机驱动双曲柄四环板摆线针轮式减速器中的环板进行了形状优化设计，得到了良好的效果。

12. To improve the transmission accuracy and stiffness of the ball cycloid reducer, the authors developed a novel cycloid ball reducer, which uses a full complement ball as its gear teeth.

为了提高摆线球齿传动的精度和传动刚度,研制了一种新型的摆线球齿传动。

13. Our main products include “Tianxing” planetary cycloidal pin wheel reducer series, drum motor series, rigid tooth reducer series.

主要产品有：“天星”牌行星摆线针轮减速机系列、电动滚筒系列，硬齿面渐开线减速机系列。

14. Series of flexible rotor cycloid gear pump from the main rotor, outer rotor teeth, pump body and explosion-proof motors and other components.

主要由内齿转子、外齿转子、泵体和防爆电动机等部件组成。

15. The two teeth difference cycloid gear drive now is widely used in the small speedratio reductor transmission,especially during the heavy_power,transmission,small speedratio.

二齿差摆线针齿行星传动近几年来在小速比减速机上,特别是在大功率速比小范畴的使用过程中得到广泛的应用。

16. The Design and Manufacture of Low-pressure and High Flow Cycloidal Rotors Pump

低压、大流量摆线转子泵的设计和制造

17. Equation of Tooth Face of Shaping Gear Wheel for Cycloidal Tooth Bevel Gear on Klingelnberg

克林贝格摆线齿锥齿轮产形轮齿面方程

18. Our main products: reducer, gear motor, bevel gear, worm-gear motor, cycloidal reducer and variator.

公司主要产品有：齿轮减速机；蜗轮蜗杆减速机；螺旋伞齿轮减速机；摆线针轮减速机及无级变速器。

19. Modification of Profile for Internal-Meshing Cycloid Rotary Compressor

内啮合摆线转子压缩机齿型修正研究

20. internal cycloid diesel engine

内摆线柴油机

21. The vibration performance of cycloid ball planetary reducer was analyzed.

分析摆线钢球行星传动减速器的振动特性。

22. Keywords parametric curves;cycloid;interpolation;constant feedrate;

参数曲线;摆线;插补;恒速进给;

23. Mechanics property analysis of double cycloidal steel ball planet gear transmission reducer

双摆线钢球行星传动减速器的力学性能分析

24. Shape Optimization of Ring - plate in Double Crank Four Ring-plate Cycloidal Pinwheel Reducer

双曲柄四环板摆线针轮减速器中环板的形状优化

25. Parameter Optimization of Double Crank Ring-Plate Cycloid Drive

双曲柄环板式针摆行星传动的参数优化

26. Study of A Double Rank Four Ring-Plate Cycloid Drive Driven by Double Motors

双电机驱动双曲柄四环板式针摆行星传动研究

27. Principle Analysis of Double Crank Four Ring - plate - type Pin - cycloidal Gear Planetary Drive Driven by Two Motor

双电机驱动双曲柄四环板针摆行星传动理论分析

28. variable cross section cycloid gear

变截面行星轮

29. Thermal Energy Analysis of Double Crack Four Ring-Plate Cycloid

四环板式针摆行星传动减速器的热功率分析

30. Ring-plate Dynamic Analysis of the Four-ring-type Cycloidal Drive

四环板式针摆行星减速器环板的动态分析

31. Study of Cycloid Reducer with Circular Arc Gear Profile

圆弧针齿行星传动的研究

32. Experimental verification of cycloidal pendulum's isochronism

圆滚线摆的等时性研究

33. A short-amplitude cycloid is used to be the primary gear form for stator and the conjuration gear form using on rotor on the basis of the analysis and compare of all kinds of cycloids.

在对各种摆线分析比较的基础上,提出采用短幅内摆线作为原始齿形曲线用于定子骨线设计,其共轭曲线用于转子的双头单螺杆泵设计。

34. On the theoretical basis of this paper, a sample prototype is designed and made.It provides practical base for further development of cycloid steel ball transmission.

在本文的理论基础上设计并制造了一台试验样机，为端面啮合摆线钢球行星传动的进一步开发提供了实践基础。

35. Based-DFMA assembling design of cycloid planetary reducer with needle rollers

基于DFMA的摆线针轮行星减速器的装配设计

36. Digital Prototype Based Development of Full Complement Ball Cycloidal Reducer

基于数字样机技术的密珠摆线减速器开发

37. Based on compounding cycloid track, a leg mechanism of a bipedal dinosaur was designed.

基于组合摆线运动轨迹设计了一种两足恐龙腿机构。

38. Keywords Cycloidal spiral pinoin cutter;CAD/CAM;Formative errors;

外摆线螺旋插齿刀;CAD／CAM;造型误差;

39. cycloid of multi - tooth difference

多齿差摆线

40. Cycloidal pump with multi -tooth number

多齿差摆线泵

41. On the Sliding Coefficient of the Cycloidal Pump with Multi-tooth Number Difference

多齿差摆线泵滑动系数的研究

42. On the Profile Modification in the Cycloidal Pump with Multi-tooth Number Difference

多齿差摆线泵的齿形修正

43. The many teeth difference cycloid gear drive now is widely used in the low transmission ratio and big power in kilowatt specifically.

多齿差摆线针齿行星传动近几年来在小速比减速机上，特别是在大功率速比小范畴的使用过程中得到广泛的应用。

44. Optimization Design of Basic Parameter in Cycloidal Pump with Multi-tooth Number Difference

多齿差摆线齿轮泵基本参数的优化设计

45. Profile Overlapping Interference of Cycloidal Pump with Multi-tooth Number Difference

多齿差摆线齿轮泵的齿廓重迭干涉

46. Discussion on Design of Cycloidal Pump with Multi-tooth Number Difference

多齿差摆线齿轮泵设计计算探讨

47. Cycloidal patterns in different size are used from the ground to the ceiling and walls of stair well until to the ceiling of the second floor.

大小不一的圆形图案从底层入口天花，楼梯间墙面，一直延续到二层天花。

48. Quantitatively analySes error factors that affect geometric lost motion of cycloidal gear, andbuild up mathematical model on the ge0mertic lost motion ca1cutation of cycloidal gear.

定量地分析了各种误差因素对摆线针轮行星传动几何回差的影响，并建立了计算摆线针轮行星传动几何回差的数学模型。

49. The paper theoretically analyzes the non-chain drawing mechanism with involute cycloidal compound tooth in a coal machine and researches the photoelastic test.

对采煤机渐开线、摆线复合齿轮-销轨无链牵引机构作了理论分析及光弹性试验研究。

50. Study on Performance of Cycloid Pinwheel Planetary Reducer with Parallel Axis

平行轴摆线针轮减速器性能的研究

51. A comparison was made on force bearing conditions of the cycloidal gear with the same typed two pieced gear cycloidal reducer.

并与同种机型两片轮摆线减速机的摆线轮受力进行比较。

52. The paper has built the optimum model as objective function of the smallest fluctuation and obtained the optimum structure of inner and outer rotor of cycloid gear pump.

建立了以“脉动量最小”为目标函数的优化模型，得出了摆线齿轮泵内外转子的优化结构。

53. Rsearch on Open CNC System for Cycloid Gear Grinder

开放式摆线磨齿机的数控系统研究

54. Optimization of the Design Parameters of Cycloidal Pump with Singularity Type Profile

异型齿廓摆线泵的参数优化设计

55. The Optimum Efficiency of Cycloidal Propellers with Constant Attack Angle

恒攻角摆线推进器的最佳效率

56. Our Company specializes in manufacturing series of Dilong brand speed reducers, cycloidal pins, stepless speed reducers, motors and electric valve actuators.

我公司是一家专业生产“迪龙”品牌减速机、摆线针、无级变速器、电机、电动阀门执行器等系列产品的企业。

57. I have 26 plants in casting history, with 2 T cupola and one-ton furnace, casting pieces of machinery from sand, the main casting reducer tank shell and cycloid, kingpin Shanghai.

我厂已有26年的铸造历史，拥有2T冲天炉及1吨炉，铸造件机械脱沙，主要铸造减速器箱体及摆线的外壳，主销上海。

58. Keywords Shaft mucker;Centre-rotation;Worm-drive;Cycloidal needle wheel;

抓岩机;中心回转;涡杆传动;摆线针轮;

59. A new type of rotary compressor is discussed. Based on short frame outer cycloid that is selected as inner profile, the inner and outer rotor's outlines are analyzed.

探讨了一种新型内、外转子啮合的压缩机结构,以短幅外摆线的内等距线为内转子型线进行了典型分析,说明内、外转子型线的形成,并提出了一种工作容积的准确计算方法.

60. Keywords shaping cutter;mathematic model;cycloidal;

插齿刀;数学模型;外摆线;

61. The cycloid has an isochronal pendulum.

摆线具有严格的等时摆。

62. Mathematical model of gear teeth meshing in cycloidal reducer and its resolution

摆线减速器轮齿啮合的数学模型及求解

63. Study on the Tooth Profile of Cycloid Cam Sliding Tooth Gearing

摆线凸轮活齿传动原理及齿形理论

64. Cycloidal gear pair with small teeth difference

摆线少齿差齿轮副

65. cycloidal type rotary index units

摆线式回转分度台

66. cycloidal planetary gear speed reducer

摆线式行星齿轮减速机 行星摆线针轮减速机

67. Calculation of common normal length of inner rotors in cycloidal pump

摆线泵内转子公法线长度的计算和测量

68. Optimization Design of Basic Parameter in Cycloidal Pump

摆线泵基本参数的优化设计

69. cycloid gear grinding machine

摆线磨齿机

70. The cycloidal equidistant-curve worm gearset is the new type of worm and worm gear transmission equipment.

摆线等距曲线蜗轩是一种新型的蜗杆传动。

71. The cycloidal propeller was developed prior to World War II but was only occasionally used in tugs because of its manoeuvrability.

摆线螺旋桨研制之前第二次世界大战中，但只是偶尔使用的拖船，因为它的操纵性。

72. The design of tooth profile curve of cycloidal planetary transmission mechanism

摆线行星传动机构齿廓曲线的设计

73. FORMING OF THE TOOTH PROFILES AND ESTABLISHING OF THE PARAMETRE EQUATION OF THE CYCLOIDAL ROTOR OIL PUMP

摆线转子式油泵齿廓的形成与参数方程的建立

74. Design in cycloid rotor pump

摆线转子式齿轮泵的设计

75. Non-undercutting Conditions for Small Rotor in Cycloid Rotor Pump

摆线转子泵小转子不根切的条件

76. The Work Principle and Characteristics of Cycloid Rotor Pump

摆线转子泵的工作原理及特点

77. Design Calculation of Cycloid Rotary Pump

摆线转子泵的设计计算

78. The Designing of the Oil Cavity of Cycloidal Rotor Pump Cover

摆线转子泵盖油腔的设计

79. Determination of Rotor Structural Parameters of Cycloidal Rotor Pump

摆线转子泵转子结构参数的确定

80. Forming of the rotor tooth profile of cycloid rotor pump

摆线转子泵转子齿廓的形成