deform

deform

1. "Aylmer," said Georgiana, "I do not know what the cost would be to both of us to remove this birthmark. Removing it could deform my face or damage my health."

"艾尔默,"乔治亚娜说,"我不知道把这块胎记去掉我们俩将付出什么代价,去掉它可能会让我的脸变丑或者影响我的健康."

2. In accordance with the command,the relative module will be called by DEFORM main program to complete preprocessing before analyzing the object and numerical simulation of deforming the object.

DE-FORM主程序根据脚本指令,调用相关功能模块完成分析对象的前处理和工件成形的数值模拟。

3. Each function in DEFORM preprocessor can be controlled by corresponding script command.

DEFORM前处理器中每一项功能的实现,均可用相应的脚本命令控制。

4. Application of Deform Limited Liability Analysis System Software

deform有限元分析系统软件及其应用

5. Cause Analysis of Craping Deform of Bobbins FDY

FDY筒管皱缩变形的原因探讨

6. Instantly sealing for the paper board& PP, PVC blister and the paper board not to deform, Instant heating, fully envelop perfectly for blister.

PVC 泡壳与印刷精美的纸板瞬间接合而纸板不会变形，瞬热式，泡壳可完全密封。

7. Instantly sealing for the paper board &PP,PVC blister and the paper board not to deform, Instant heating, fully envelop perfectly for blister.

PVC泡壳与印刷精美的纸板瞬间接合而纸板不会变形，瞬热式，泡壳可完全密封。

8. NIE L,WEN X W,YI ZH CH,et al.Development of DSQ short-based water tube tiltmenter and its calibrating apparatus[J].Crustal Deform Ation and Earthquake,2001,20(3):74-81.

[1]聂磊,温若卫,易治春,等,DSQ型短基线水管倾斜仪及标定装置的研制[J].地壳形变与地震,2001,20(3):74-81.

9. There is no materials but will deform more or less under the action of forces.

一切材料在力的作用下多少会变形。

10. the state in which a substance has no tendency to flow under moderate stress; resists forces (such as compression) that tend to deform it; and retains an definite size and shape.

一种物质在常压下不会流动的状态。

11. Morphological study for deform root groove in maxillary lateral incisors

上颌侧切牙畸形根面沟的外形研究

12. It is the indispensable high-quality house products to be free of climate but deform.

不受气候影响而变形是不可缺少的优质家居产品。

13. Do not bend or deform the probes as this could cause irreparable damage.

不能弯曲或毁坏探头的表面，因为这将导致不可修复的损坏。

14. "In severe cases, adhesions immobilize and deform the joints, and adjacent skin, Bones, and muscles atrophy."

严重病例中,黏连带造成关节移位和畸形,附近的皮肤、骨骼和肌肉萎缩。

15. In severe cases, adhesions immobilize and deform the joints, and adjacent skin, bones, and muscles atrophy.

严重病例中，黏连带造成关节移位和畸形，附近的皮肤、骨骼和肌肉萎缩。

16. In severe cases, it can deform joints and cripple its victims.

严重的病例，可使关节变形，使病人残废。

17. Severe variations deform the discharge curves.

严重者使放电曲线发生畸变。

18. To realistically deform the soft tissues, we develop two deformation techniques: hybrid physical-based deformation modeling (HPDM) and synthetic deformation modeling (SDM).

为了使器官快速且逼真地变形，我们提出了两种软组织变形的方法：混合式物理变形模塑与综合式变形模塑。

19. The comparisons among three kinds of calculation methods for rolling force in cold strip rollingwere carried out, a new kind of real time counting for the deform of strip was briefed.

介绍了三种常用的冷轧带钢轧制力计算方法间的比较及一种新带钢变形的实时计算方法。

20. Three kinds of techniques for improving the metal fatigue property in industry were introduced,including cold deform strengthening,laser surface treatment and ion implantation.

介绍和论述了冷变形、激光表面处理技术和离子注入三种工业上用于改善金属材料疲劳性能的强化方法。

21. It was inducted from the point of view of phenomenology that primary effect of concrete shrinkage was to deform and restraint all levels and components of the concrete.

从现象学角度归纳出混凝土收缩的核心作用是使各层次组分产生变形与约束。

22. In children, a lack of the vitamin D molecule causes rickets , which softens the bones and causes them to deform or break easily.

以儿童来说，缺少维生素D分子会引起软骨病，导致骨骼软化乃至于变形或容易骨折。

23. Weld whose heat resource is the laser, also owns the advantage such as low heat input and small heat deform.

以激光为热源的焊接同样也可以得到低热输入、变形量极少的效果。

24. Sometimes, however, the ability of bars to deform appreciably in torsion is put to good use

但是，有时要利用杆件在扭转时具有可观变形的能力。

25. deform a structure, limb, spine

使一结构、 肢体、 脊柱变形.

26. On the basis of DEFORM simulation software,the rigid and plastic model have been established.

使用DEFORM有限元模拟软件,建立刚塑性基本模型;

27. Use the furnace control is the key, overheated is too thin easy to deform, cold shaping would not be too hard.

使用时火候的控制是关键，过热则太稀易变形，冷了又会太硬无法塑形。

28. Four structural styles including compression, extension, slipping and overturning are subdividedaccording to the structural deform in Tarim basin.

依据塔里木盆地构造变形特征，可划分出压缩、伸展、走滑和反转四种构造样式。

29. It starts with a smirk, then it goes to a smile, a grin, a snicker, a titter, a giggle, a chuckle, chortle, laugh, cackle, deform, howl, shriek, roar, convulse and die.

先是傻笑，然后开始微笑，露齿地笑、窃笑、呵呵笑、咯咯笑、吃吃笑、哈哈笑、欢笑、高声笑、大笑、身体变形、嚎叫、尖声笑、狂笑、抽搐和死亡。

30. Keywords subsea pipeline;sonic ball;geometric ball;leakage;deform;mechanical connection;

关键词海底管道;声波球;几何球;渗漏;变形;机械接头;

31. Ice crystals begin to deform measurably

冰晶就产生某种程度的变形了。

32. To simulate the deform process of metal material by elastoplasticity finite .The coordinate is renewed after each iteration in order to simulate the deform law of elastoplasticity.

利用增量有限元理论,对金属材料的变形过程进行模拟。为了模拟工程中塑性变形较大的构件的变形规律,在每个加载步迭代完成后自动实现坐标更新。

33. The material in a moon takes time to deform, so the distortion is always out of alignment with the forces that produce it.

卫星中的物质需要时间变形，因此变形方向一定不会与造成变形的力相同。

34. Analysis of Causes to Deform of Labels on Freight Cars in Overhaul and Suggestions

厂修货车标签变形问题的原因分析及建议

35. Deforming resistance is capability of material resisting deform.

变形抗力是材料本身抵抗塑性变形的能力。

36. deform action monitoring

变形监测

37. parallel double shear wall in deform joint

变形缝处平行双剪力墙

38. deform crack

变形裂缝

39. Even a very small shearing force will deform a fluid body, but the velocity of the deformation will be correspondingly small.

只要一个很微小的剪切力就会使流体发生变形，但是变形的速度会对应比较小。

40. Deformable models are of great importance for contour extraction and surface reconstruction, which cause the deformable models deform to the object contours due to simulated external force.

可变形模型对于范围广范的一系列视觉问题给出了统一的解决方法 ,并在轮廓提取、运动跟踪、3D重建、立体匹配等方面得到了广泛应用。

41. To mar or spoil the appearance or shape of;deform.

台湾岛的形状是一个拉长的椭圆形。

42. Weld interfaces must contact well each other during assembling, and remain perpendicular to the vertical line to minimize deform and displace...

吊装时尽可能使焊接面与中垂线相互垂宜，减少环、片之间的变形和位移，保证焊缝的气密性；

43. Comparing with GUI mode,the text-only mode of DEFORM could be in favor of active control of work flow and development of application for user.

同DEFORM软件的图形用户界面模式相比,其文本运行模式有利于用户灵活控制工作流程和有针对性地进行二次应用开发。

44. At the same time,using press and feed motion of the idler wheel have blanks deform locally and obtain axissymmetry parts.

同时利用滚轮的压力和进给运动,使毛坯产生局部变形,最后获得轴对称零件。

45. Patterns will deform under the effect of the forces, so we adopted Jacobi's iteration method to solve the movement equation.At last,for the best effect,we made the texture mapping for the pattern.

同时采用基于雅可比迭代法的隐式积分方法高效求解了织物的运动方程,不断显示服装的悬垂动画,并用纹理映射模拟织物的真实效果.该方法求解效率较高,模拟效果比较真实.

46. Patterns will deform under the effect of the forces, so we adopted Jacobi's iteration method to solve the movement equation.

同时采用基于雅可比迭代法的隐式积分方法高效求解了织物的运动方程，不断显示服装的悬垂动画，并用纹理映射模拟织物的真实效果。

47. Keywords taper ferrule;closed type cold rolling;pair;DEFORM;

圆锥套圈;闭式冷辗扩;成对;DEFORM;

48. There is no material but will deform more or less under the action of forces .

在力的作用下，各种材料多少要产生形变。

49. There is no material but will deform more or less under the action of force.

在力的作用下，没有一种材料不或多或少地变形。

50. In a frontal collision, the car′s nose will deform to absorb the impact energy.

在正面碰撞中，汽车前端会变形，来吸收撞击能量。

51. In the case of this rendering of the character, though, it is a white coat modeled with his creases that deform thanks to the skin.

在渲染这个人物的时候，虽然，白色外套和身上的皱褶跟随皮肤的改变而变形。

52. Ice crystals begin to deform measurably under a unidirectional pressure of slightly less than one atmosphere

在略小于一个单向大气压的压力下，冰晶就产生某种程度的变形。

53. During the energy accumulation, geostress increases gradually, and correspondingly rock happensto deform.

在能量积聚期间,地压逐渐增加,相应地岩石发生形变。

54. Pustulant tumors that become infested with maggots deform their faces, forcing teeth from their jaws.The devils eventually starve, but not before passing on the virulent cancer.

在脓胞肿瘤出现大量的蛆寄生后，袋獾的面部会严重畸形，使下颚的牙齿突出、无法咬合，染病的袋獾会先把致命肿瘤传染给其他个体，最后才挨饿而死。

55. Under load, the working surfaces of the parts rub, overheat and deform.

在负载情况下，零件的工作面摩擦、过热并变形。

56. Construction of new buildings or other structures in such an area shall not deform the environmental features of the historical and cultural site.

在这个地带内修建新建筑和构筑物，不得破坏文物保护单位的环境风貌。

57. The hole and edge usually deform in bending procedure, this paper mainly discussed the method of preventing the hole and edge deformation in bending procedure.

在进行孔和边弯曲的过程中,常时常发生变形的情形,本文主要讨论了弯曲时孔、边变形的原因和对策。

58. A steady increase of load on a part will cause it to deform gradually.

均匀增加零件的负荷会使零件逐渐变形。

59. Numerical Simulation of Closed Type Cold Rolling with Pair Taper Ferrule Based on DEFORM

基于DEFORM的圆锥套圈成对闭式冷辗扩数值模拟

60. Integration of Preform Optimization Design System in Forging Process Based on Deform Uniformity

基于变形均匀性的锻造预成形优化系统集成

61. Research on Multi-wavelet's Application to Elimination of Gravitational Abnormal Deform

基于多重小波的海洋重力异常畸变消除方法

62. Plastic deformation is the ability of bend or deform before breaking.

塑性变形就是在断裂前弯曲或变形的能力。

63. and the displacements of abutments will develop great accessional internal force, and deform the main arch and even crack, accordingly change the system of the structure.

墩台位移会使上部结构产生较大的附加内力，使拱圈变形甚至于开裂，从而导致结构的受力体系发生改变等。

64. Diagnosis of osteoarthrosis deform ans endemica with X-ray and CT

大骨节病的X线及CT诊断

65. Shoes that are too tight deform the feet

太紧的鞋使脚变形。

66. The shale beds in between generally deform plastically.

夹在其中的页岩层通常是塑性变形。

67. How do engineering materials deform when bearing mechanical loads?

如何做工程材料变形时，轴承机械载荷?

68. If conservation planning, wet, dry, the surface of a raisin deform internal concrete binding, but also often lead to cracks.

如养护不周、时干时湿，表面干缩形变受到内部混凝土的约束，也往往导致裂缝。

69. After the displacement mapping is set to stone it is possible to deform objects slightly if there is need for more radical features.

如果需要一些整体上的特征，也可以在位移贴图完成后使该物体产生一点轻微畸变。

70. The puppetry tools help you deform layers in ways that you had never considered before.With an auto-tracing feature you can quickly start animating with this active tool.

学习如何结合绘画,运动跟踪,文本和键控,使您可以接近任何动画或复合效应,有信心能办得到.

71. It will deform into an elongated blob

它会变形而成为一个拉长了的滴状体。

72. It has many advantages, such as high working speed, seal impression is clear and no diffusing, seal surface will not shrink or deform.

它具有制作快捷（户可即定即做、等、可取）迹清晰不扩散，印面不收缩、变形的特点。

73. When installing the holding-down clip, you should tighten is smmetrily and orderly, put forth your steength evenly to avoid strong local stress, which will deform flange and injure enamel surface.

安装卡予时，要求对称按顺序拧紧，用力均匀以免局部应力适大，使法兰变形而破坏瓷面。

74. The study on recrystallization kinetics and grain growth models during material hot forging was accomplished and user subroutines were programmed to be embedded into DEFORM(superscript -TM).

完成了金属材料热变形过程中再结晶动力学与晶粒长大模型研究，编制用户子程序并嵌入到DEFORM(上标-TM)程序中。

75. For the tunnel built in soft soil, it would deform along with the reconsolidation of disturbed soil, and the structure of tunnel and the operation of metro would be endangered.

对于软土地区的地铁隧道来说，下卧扰动土体的再固结使隧道随之产生变形，从而危及隧道结构和地铁运营的安全。

76. Paint Deform for Poly Objects;

对多边形物体绘制变形;

77. I do not stifle this conscience and I do not deform it;

对良知，不扼杀，也不扭曲；

78. Yield stress is the stress at which a material begins to deform plastically.

屈服应力是材料开始发生弹性型变时的压力大小。

79. An example is given which is simulated by DEFORM.

并利用DEFORM软件给出了实例。

80. We continue the same fabrications and applied external force to deform the sample severely, scribing it into two halves.

延用之前的同样制程，并施以外力把晶圆切成两半。