delamination

delamination

1. At very light normal load and slow sliding speed, the wear mechanism of 2024 aluminum alloy was abrasive wear and delamination wear. At very high normal load and sliding speed, severe melt wear and gross material transfer took place.

2024铝合金在轻微磨损条件下主要是磨粒磨损和剥层磨损,而在高速高载条件下主要是严重熔融磨损,并伴随材料的大量转移。

2. Controller in package carton should be placed in delamination, and delaminations should be comparted by plastic air bladder.

2包装箱内的控制器分层放置，每层用气泡塑料膜分隔；

3. ANALYSIS ON BUCKLING AND POST?BUCKLING OF DELAMINATION IN 3D COMPOSITES

3D复合材料中脱层的屈曲和后屈曲分析

4. Keywords PDC well bit;failure analysis;microchipping;gross fracture;delamination;

PDC钻头;失效分析;微断屑;宏观破裂;剥离;

5. Delamination is a common phenomenon in EMC package, one of the main defects needed to be solved as well.It can affect the reliability of electron PKG severely.

PKG内部分层是电子封装中很普遍的一种现象,也是必须要解决的一种主要缺陷,它会严重影响电子封装的可靠性。

6. Delamination Cracks and Fracture Evaluation in DWTT of X70 Pipeline Steel

X70管线钢DWTT试样的分层裂纹及其断口评价

7. Wang P,Meng Q C,Zhang X.Analytical method of solution on asymmetric delamination in symmetric orthogonal composite laminated beams [J].Acta Materiae Compositae Sinica,2004,21(1):95-99.

[5]王平,孟庆春,张行.复合材料层合梁非对称分层问题的解析解法[J].复合材料学报,2004,21(1),95-99.

8. A New Method of Observing Delamination Frost heave Amount and Its Applicability in the Seasonal Frozen Area

一种新的分层冻胀量观测方法及其在季节冻土区的应用

9. In contrast, the SQZ is undergoing delamination and underplating to cause mass-energy recycling between crust and mantle, and around the Foping region a new plume is probably developing.

与之相反，南秦岭正在经历拆沉-底侵的物质再循环作用，佛坪一带可能发育新的地幔柱；

10. business component delamination

业务构件分层

11. This thesis considers the delamination behaviors between substrate and molding compound for Ball Grid Array (BGA) products caused by the plasma etching process.

中文摘要本文针对阵列锡球封装产品基板和胶饼间所产生的分层作研究。

12. This thesis researches to address the occurrence of delamination phenomenon between the interface of molding compound and the copper leadframe die paddle during assembly process.

中文摘要本论文主要针对铜钉架在经过封装制程其本身与胶饼间所产生的脱层现象做研究。

13. The color of the products is argent grey metallic shine, smooth, unknit. They mustn't be oxydic badly, lacking of sintering, over heating, delamination and cracking.

产品表面呈银灰色金属光泽、光滑、平整、不得有严重氧化现象，不得有欠烧、过熔、鼓泡、分层、裂纹等缺陷。

14. In this paper,the experiment of mining following cutting rock fill with level delamination and cementation floor for inclined seam mining in Maozaiwan mine area,Tongshanling Mine is introduced.

介绍了水平分层胶结底板上向分采充填法在铜山岭矿猫崽湾矿区倾斜极薄矿脉中的开采试验情况。

15. The underplating, convecting, and delamination are the three major mechanisms in the continental rifting and extensional geodynamic system.

从大陆裂解和伸展构造动力学来看，主要存在底侵作用、对流作用和拆层作用3种机制。

16. From the viewpoint of culture philosophy, the social delamination is a normality and inevitable phenomena of human society.

从文化哲学的观点来看，社会分层现象是人类社会发展的一种常态，是人类社会发展中不可避免的现象。

17. Gentler delamination design, beautiful page design, lowness coupling in fuctions , optimize of SQL and arithmetic sentence make this system very well.

优雅的分层设计、美观的页面设计、功能间低耦合、SQL及算法语句的优化让系统增色不少。

18. Underfill Delamination of Flip Chip on Low-Cost Board

低成本基板倒装焊底充胶分层裂缝扩展研究

19. There was the especial framework of social delamination in Dong-people traditional society,put up a point of non-gradational delamination.

侗族传统社会存在着社会分层的特殊结构,表现出非阶级分层的特点。

20. The Failure Study of Interface Delamination in Flip-chip Micro-electron Packaging

倒装焊微电子封装中填料分层开裂失效研究

21. Research of underfill delamination of flip chip

倒装焊电子封装底充胶分层研究

22. Study on Delamination Rate in Determining the Miscibility of Resins by Co-solvent Method

共溶剂法测定树脂间相容性时分层速率的研究

23. Discussion on the lithospheric thinning of the North China craton: delamination? or thermal erosion and chemical metasomatism?

关于华北克拉通燕山期岩石圈减薄的机制与过程的讨论:是拆沉,还是热侵蚀和化学交代?

24. Title： Discussion on the lithospheric thinning of the North China craton: delamination? or thermal erosion and chemical metasomatism?

关键词：华北克拉通;燕山期;底侵玄武质岩浆;构造加厚;岩石圈拆沉

25. Nonlinear harmonic responses of a composite beam with an arbitrary delamination

具任意脱层复合材料梁的非线性谐波响应

26. Axisymmetrical Buckling Analysis of Cross-ply Cylindrical Shell with Delamination

具脱层的正交铺设圆柱壳的轴对称屈曲分析

27. Keywords impact fracture;impact damage;delamination;laminates;fractography;

冲击断裂;冲击损伤;分层;层合板;断口形貌;

28. Both of them have high delamination rate after Room.Temp. water or boiling water immerging.With 21.5% and 33.1% after the fourth Rm.Temp. recycle and 43%, 55% after the second boiling water immerging.

冷水浸泡和沸水蒸煮后柠檬桉、窿缘桉的剥离率和剥离数率均较高，其中冷水循环4次后的剥离率分别为33.1%和21.5%，热水蒸煮2次后的剥离率分别为55%和窿缘桉为43%。

29. The Delamination and Adhesion of Diamond Films Deposited on the Surface of Cutting Tool Materials by CVD

刀具表面CVD法金刚石薄膜剥离及其结合性能

30. Research on the Delamination Shearing Deformation Theory Used in the Poplar-straw Laminated Beam

分层剪切理论用于分析杨木-秸秆层合梁弯曲问题的研究

31. Study of buckling and postbuckling behavior of stiffened laminated plates with a delamination damage

分层损伤复合材料加筋层合板屈曲和后屈曲性态研究

32. Delamination Teaching Method

分层次教学法

33. delamination onset and growth

分层起裂和扩展

34. An ultrasonic feature scan imaging system used for testing delamination flaw probably existing in the bimetal rotor clad layer was studied and developed.

利用超声特征扫描成像技术,研制了一套检测双金属转子复合层分层缺陷的设备,实现对双金属转子9个柱塞孔的自动检测。

35. Study of Delamination Buckling for a Symmetric Cross-ply Composite Laminate under Uniaxial Loads

单轴载荷作用下对称正交铺设层合板的脱层屈曲研究

36. double- blind single delamination

双盲

37. Study on Delamination Thickness of the Composite Metal Plates (Strip) in Rolling

双金属板(带)复合轧制的分层厚度研究

38. In addition, if you are not the correct cleaning blanket, give rise to the surface of rubber blanket, aging, so as to produce blistering, delamination, and so on.

另外，若搁置不不差的冲洗剂冲洗橡皮布，则会引起橡皮布暗地橡胶扩张、老化，从而爆发起泡、穿层等本体。

39. Delamination Buckling of a Curved Composite Beam Subjected to a Closing Bending Moment

合拢弯矩作用下复合材料曲梁突变屈曲的研究

40. ANALYSIS ON COMPRESSION BUCKLING OF STITCHED ORTHOTROPIC LAMINATES INCLUDING ARBITRARY DELAMINATION

含任意分层缝纫正交层合板压缩屈曲分析

41. STRIP TRANSFER FUNCTION METHOD FOR BUCKLING ANALYSIS OF LAMINATES WITH BUILT-IN RECTANGULAR DELAMINATION

含内埋矩形脱层板屈曲分析的传递函数方法

42. Contact effect on dynamic response of stiffened laminates with a delamination

含分层损伤复合材料加筋板动力响应分析接触效应

43. Frequency Response Functions Analysis of Composite Laminated Plate with Delamination

含分层损伤复合材料层合板频率响应函数分析

44. BUCKLING BEHAVIOR OF COMPOSITE AGS WITH DELAMINATION

含损伤复合材料AGS板的屈曲特性

45. METHOD OF STATE DECOMPOSITION AND TRIGONOMETRIC SERIES ON ELLIPTICAL DELAMINATION IN COMPOSITE LAMINATE

含椭圆分层复合材料层板三维问题的三角级数能量解法

46. STUDY OF DELAMINATION FRONT CONTACT EFFECT OF COMPOSITE LAMINATES WITH ELLIPTICAL DELAMINATION

含椭圆分层损伤复合材料层合板分层前缘接触效应研究

47. BUCKLING OF LAMINATED CYLINDRICAL SHELL WITH CIRCUMFERENTIAL DELAMINATION I--BASIC EQUATIONS AND SOLUTION-DETERMINING CONDITIONS

含环向贯穿脱层的轴压圆柱层壳屈曲分析:I--基本方程与定解条件

48. DYNAMIC BUCKLING OF LAMINATED COMPOSITE BAR WITH DELAMINATION SUBJECT TO AXIAL STRESS WAVES

含脱层复合材料层合杆在轴向应力波作用下的动态屈曲

49. Experimental Study on Bearing Strength of Composite Joints with Delamination

含脱层复合材料连接件的挤压强度试验研究

50. Bending problem of delamination includes compressive problem of delamination and it is more complicated than the later.

含脱层层板的弯曲问题包含了脱层的压缩问题,却比压缩问题更加复杂。

51. Dynamic buckling of laminated composite beams with delamination subject to axial impact

含脱层损伤复合材料层合梁的冲击动力屈曲

52. Therefore, the diagnostic rules of delamination failures can be developed by studying the dynamic behaviors of composite laminated plates under healthy and damaged conditions respectively.

因此，分别研究层合板在健康状态下和损伤状态下的动态特性，就可以分析建立脱层损伤的诊断知识规则。

53. And also there are evidently upright delamination, of them that mainly live in the topsoil layer because their varieties and amounts decrease with the increasement of soil animals gradations.

土壤动物的垂直分层也比较明显，种类和个体数量随着土壤层次的加深而减少，具有明显的表聚性。

54. The interlaminar transverse shear stresses are the main factor, which leads to the delamination of laminated plate in the lower free vibration frequencies.

在低阶模态振动下，横向剪应力是造成层合板脱层的主要原因;

55. The gap element is used to prevent the overlap of the delamination.The strain energy release rate is studied along the delamination front.

在分析中引入接触元来防止层间的闭合接触效应,并进一步分析了分层前缘的能量释放率。

56. The effect of the arc angle of delamination crack on the critical load is also studied.

在文中也对脱层裂纹的弧角对极限载荷的影响进行了研究。

57. The more energy is needed to produce delamination crack, the three-dimensional constraint of crack tip decreases, the effective thickness decreases or main crack tip is blunt.

在断裂过程中产生分层裂纹需要消耗更多的能量、降低裂端三维应力约束、有效厚度降低或裂尖钝化。

58. As the results the problem concerning the prediction of the delamination thickness of the finishing products has been solved in the practical production in light of the c...

在结合武钢辉宝复合材料有限公司复合轧制工艺特点的基础上,解决了实际生产过程最终成品分层厚度预报。

59. Keywords adakite;subduction;delamination;underplating;copper-gold mineraliztion;China;

埃达克岩;俯冲;拆沉;底侵;铜金矿化;中国;

60. Link Delamination Algorithm for Topic Search

基于主题搜索的链接分层算法设计与实现

61. A STUDY ON COORDINATED ATTACK DETECTION BASED ON DELAMINATION

基于分层检测的协同攻击检测技术研究

62. The experiment of delamination and felt of aluminum powder at room temperature on the basis of rapid manufacturing mold

基于快速制模的铝粉室温分层粘结试验研究

63. Research on Delamination System of Berth Mud-filling Knowledge Based on Characteristics

基于特征的泊位淤积知识层次体系研究

64. Keywords Z-pinning;composites;double cantilever beam（DCB）;delamination toughness;

复合材料;双悬臂梁;层间韧性;

65. In composite laminates there are four basic failure modes: matrix cracking, delamination, fiber breakage and debonding.

复合材料层合板中存在四种基本的失效模式，即：基体开裂、分层、纤维断裂及脱粘。

66. Analytical Method of Solution on Delamination in Symmetrical Orthogonal Composite Laminated Beams

复合材料层合梁分层问题解析解法

67. ANALYTICAL METHOD OF SOLUTION ON ASYMMETRIC DELAMINATION IN SYMMETRIC ORTHOGONAL COMPOSITE LAMINATED BEAMS

复合材料层合梁非对称分层问题的解析解法

68. Keywords composite laminate;delamination;three dimensional problem;additional state;method of trigonometric series;

复合材料层板;分层;三维问题;附加状态;三角级数能量解法;

69. Keywords composite laminate;interlaminar stress;delamination;transverse crack;overload.;

复合材料层板;层间应力;分层;横向裂纹;超载;

70. Analysis of Delamination Growth for Composite Laminated Cylindrical Shells Under External Pressure

外部压力作用下复合材料层合圆柱壳的脱层扩展分析

71. Multi-factorial delamination regression analysis precept is a non-randomization test precept, in which the efficacy, accuracy and sensitivity are greater.

多因子分层回归分析方案是一种功效、准确度和灵敏度均较高的非随机化试验方案。

72. Research on delamination of natural latex laminated products

天然胶乳积层制品的脱层研究

73. A HIGH ORDER MODEL OF AXISYMMETRIC DELAMINATION ANALYSIS ON SANDWICH PLATES

夹芯板轴对称脱层分析的高阶模型

74. The mechanism of delamination of a kind of pipeline steel and its effect on fracture were analyzed from fracture experiments and a fractographic investigation was made at fracture surface.

对不同厚度油气输送管线钢进行各种裂纹的断裂试验,对各裂纹的断口进行了分析,探讨了分层机理及其对不同形式裂纹体承载能力的影响。

75. The vibrating modal analysis of axisymmetrical laminated cylindrical shells with throughout circumference delamination is investigated.

对具环向贯穿脱层的轴对称层合圆柱壳进行振动模态分析。

76. When the bled of the slab surface are extended during rolling, the slab surface is delaminated and form the surface upwarping when the gas in the bled escape along the gap of delamination.

对该类缺陷的成因进行了分析和推理,认为是铸坯表层气泡在轧制延伸过程中造成钢板分层并在表层逸出导致开裂形成翘皮。

77. When the bled of the slab surface are extended during rolling, the slab surface is delaminated and form the surface up-warping when the gas in the bled escape along the gap of delamination.

对该类缺陷的成因进行了分析和推理，认为是铸坯表层气泡在轧制延伸过程中造成钢板分层并在表层逸出导致开裂形成翘皮。

78. Relationship Between Resin and PKG Delamination

封装树脂与PKG分层的关系

79. The sensing arm of a optical fiber Mach-Zehnder interferometer is sticked on composite beams to detect the delamination in the beams with press method step by step.

将光纤干涉仪的一个臂粘贴在复合材料梁的表面,用逐点下压的方法实现了复合材料的分层检测。

80. BUCKLING OF NEAR SURFACE LOCAL DELAMINATION AND DELAMINATION EXPANDING IN A CYLINDRICAL LAMINATED SHELL

层合圆柱壳体表层局部分层屈曲及其扩展