elastomer
elastomer
1. Bearings of the 2RS design have an integral double lip rubbing seal (fig 10), of polyester elastomer or polyurethane (bearings of series GEZ.
2RS设计的轴承在两侧装有内部双唇环摩擦密封件(图10),密封件采用聚酯弹性体或聚氨基甲酸乙脂制造(GEZ。
2. Taking the human face as a elastomer. 3.Simulating the facial expression by using elastomer metamorphosing.
3.将人脸五官的基本动作模拟成弹性体的形变，从而建立人脸面部表情动画。
3. EPDM is a terpolymer elastomer made from ethylene-propylene diene monomer.
EPDM是一种由乙烯 - 丙烯、二烯单聚物构成的三元共聚物弹性材料。
4. Up to now, there is no report on the dynamically photocrosslinking of PP/EPDM thermoplastic elastomer.
PP/EPDM共混型热塑性弹性体的动态光交联至今尚未见国内外有报导。
5. SANPRENE P is a base material for polyurethane elastomer that is a tough, abrasion-resistant material with elasticity rivaling that of rubber.
SANPRENE P是与抵抗那橡胶的弹性的坚韧，磨蚀抗性材料的聚氨酯弹性体的一种基本材料。
6. Therm o-plastic elastomer SBS is the biggest polymer modifier in the world used in bi tumen modification.
SBS热塑性弹性体是目前世界上改性沥青用量最大的聚合物改性剂。
7. Shanghai Fu Jin Rubber Co., found a Thermoplastic Elastomer business with research, development, production and sales in an integral whole unit.
上海富瑾橡塑有限公司是一家集研究、开发、生产、销售于一体的专业热塑性弹性体生产型企业。
8. Proffesional manufact and make weighing elastomer, al. products.
专业生产和制造称重弹性体，铝制品。
9. This thesis introduces the research actualities of new type of polyurethane elastomer at home and abroad and the developing prospect in the days to come.
主要介绍了聚氨酯弹性体新型材料的国内外研究现状,以及今后聚氨酯弹性体的发展前景和展望。
10. Using orosslink and elastomer are a good way to improved the Properhes of ACET/LDPE competies.
交联和弹性体是改性乙炔炭黑／LDPE体系的较好方法，是提高材料性价比的有效途径。
11. Introduction: Produced with the advanced technology imported from Britain, KEC water type chassis elastomer is a new generation water type environmentally friendly product.
产品简介：引进英国最新技术，是新一代水性环保产品。
12. The elastomer pinch sleeve shall be one piece construction with integral flanges drilled to be retained by the flange bolts.
人造橡胶夹管套管应该是一件式结构，并带整体法兰安装孔，以便固定法兰螺栓。
13. The elastomer pinch sleeve shall be one piece construction with flanges, drilled to be retained by the flange bolts.
人造橡胶夹管套管应该是一件式结构，并带法兰安装孔，以便固定法兰螺栓。
14. The technological process and parameters, performance of spray polyurea elastomer are introduced.
介绍了喷涂聚脲弹性体系列材料的生产工艺、施工参数及性能。
15. This paper introduces construction technology of spray polyurea elastomer used in Beijing Shooting Range CTF.
介绍了奥运射击中心飞碟靶场看台屋面防水耐磨工程采用喷涂聚脲弹性体的施工工艺。
16. The characteristics of polyolefin elastomer (POE) and its applications in general purpose plastics-polypropylene are introduced.
介绍了新型聚烯烃弹性体(POE)的优异特性,综述了POE与通用塑料聚丙烯共混改性的研究进展。
17. The recant development trend of production and application &thermo plastic elastomer(TPE) in taran are introduced.
介绍了日本最近热塑性弹性体的生产,应用的开发动向。
18. The properties and applications for new veritietie were of thermoplastics elastomer are reviewed in this paper.
介绍了热塑性弹性体新品种的特性与用途。
19. The manufacture of PU elastomer liner mould has been introduced. The influence on quality of mould and ceram is also discussed.
介绍了聚氨酯弹性体用作模具内衬的制作工艺，对模具及陶瓷质量影响因素加以讨论。
20. The feature and application effect of the polyolefin elastomer using metallocene catalyst are discussed.
介绍了茂金属催化的聚烯烃弹性体作为聚丙烯抗冲击改性剂的特点及应用效果。
21. This paper introduces mechanical property, medium resistance, low temperature toughness, age resistance, adhesive tension and construction of sprayed polyurea elastomer.
介绍喷涂聚脲弹性体的力学性能 ,耐介质性、低温韧性、耐老化性、附着力及其施工。
22. Design of mold and research of process for polyurethane elastomer for oil seal are introduced.
介绍聚氨酯弹性体油封的注射模具的设计及工艺研究。
23. This paper introduced the injection mold design of the Polyurethane elastomer.
介绍聚氨酯弹性体的注塑模具的设计。
24. Daytona 500 fragrance for men by Elizabeth Arden features a cap with anodized thermoplastic elastomer (TPE) with the product name embossed on the side.
代托纳香水500 ，男性由伊丽莎白雅顿功能与阳极帽热塑性弹性体（热塑性弹性体）产品名称浮雕的一侧。
25. With the amount of chain-extender BDO added,the performance of elastomer becomes well,but when the amount of BDO comes to a certain point it appears reverse.
以BDO扩链为例,随其用量的增加,弹性体的性能提高,达到一定值后再增加用量性能反而下降;
26. Thermoplastic polyurethane elastomer(TPU) with chlorinated polyethylene (CPE) and CPE/HPVC (high molecular weight PVC) as modifiers was studied systematically by melt blending.
以CPE和CPE/HPVC为改性剂,用熔融共混的方式对TPU的共混体系进行了系统的研究。
27. The graft copolymerization of SBS thermoplastic elastomer is carried out by MMA and BA in mixed Solvent adhesive is preparated by addition of tackifing resin.
以丙烯酸酯类混合单体对SBS热塑性弹性体在混合溶剂中接枝共聚，添加混合型增粘树脂，研制成接枝改性的SBS胶粘剂，具有较高的初粘力和终强度。
28. A kind of high impact polypropylene(PP) composite was developed with PP as basic resin, thermoplastic elastomer (POE) as toughening modifier and treated talcum power as filler.
以聚丙烯(PP)为基体树脂,(乙烯/辛烯)共聚物(POE)为抗冲改性剂,滑石粉为填料制得了高抗冲PP复合材料。
29. Toughening effects of polyphenyl elastomer, ABS, polyolefin elastomer and styrene resins on PS were studied with PS466F as matrix.
以聚苯乙烯 (PS) 46 6F为基体树脂 ,研究了不同抗冲击改性剂 :类苯乙烯弹性体、ABS、POE和苯乙烯类树脂对PS的增韧效果。
30. The title contings has been developed based on aliphatic PU elastomer as binder,mixed with superdispersant and nano ATO conductive powder.
以脂肪族聚氨酯弹性树脂为基体,透明纳米ATO导电粉为导电介质,添加超分散剂,采用物理与化学相结合的分散方法对纳米ATO进行预处理。
31. Product Information: Thermoplastic Elastomer Compounds for Product Development and Design.
企业简介:主营产品:热塑性塑料,人造橡胶,化合物产品。
32. The drive band and retainer feature a hex-drive system to distribute drive loading evenly and eliminate overstressing of the flexible elastomer bellows.
传动环和护圈配置一个六角传动系统,均匀的分配传动负载,消除柔软的弹性波纹管上的过度应力。
33. A traditional xanthic disulfide (XD) modified CR was improved greatly and a new trend combining CR with speciality elastomer emerged .
传统的黄原二硫化物衍生物调节型CR的性能得到了全面提高,出现了CR同特种橡胶结合的新动向;粘接型CR的性能更加完善。
34. However, the elastomer becomes hard and torques increase.
但是，弹性材料会变硬，扭矩也会增加。
35. A thermoplastic polyurethane elastomer was extended in the melt state through twin-screw extruder with prepolymer as chain extender.
修正了啮合同向双螺杆挤出机中的聚苯乙烯停留时间分布的一维模拟模型。
36. The fill inside its compresses body of air or liquid, bubble, ropy body, ropy elastomer some kind.
其内填充某种压缩空气或液体、泡沫体、粘稠体、粘稠弹性体。
37. Sealed with the Burgmann MG1 elastomer bellows mechanical seal.
其密封选用博格曼MG1橡胶波纹管机械密封。
38. The flexible elastomer sleeve molds itself to the encased chain, protecting the deck from turbulent seawater.
具有弹性的人造橡胶套管能够紧贴着链条，保护甲板不受到海水的侵蚀。
39. Shock Eraser Insert: Thermoplastic rubber core inside a thermoplastic elastomer butt cap is pressure fit into the shaft to reduce frame shock and vibration.
减震插片：拍柄内置热塑性橡胶内核同热塑性弹性体，有效减少球拍震动。
40. Materials for sling: terylen tape, nylon tape, elastomer thread, PVC tape, etc, having processes of noctilucence, fluorescence, repercussion, jacquard weaving by computer, etc.
吊带材料有：涤纶带、尼龙带、高弹丝、PVC带等，并有夜光、莹光、反光、电脑提花等工艺。
41. Containers elastomer High impact &resistance to low temp.
含氮阻燃级，高强度，低变形。
42. Spray polyurea elastomer(SPUA) material is a novel one made by spray technology which contains 100% solids and no solvent(0 VOC's) .generating no pollution.
喷涂聚脲弹性体(SPUA)材料是采用喷涂工艺制成的100%固含量、无溶剂、无污染的新型材料。
43. The organic combined technology of sprayed polyurea elastomer and spayed polyurethane foam is suitable for site spray of waterproof and thermal insulation roof.
喷涂聚脲弹性体及喷涂聚氨酯弹性体技术,两者有机结合,适用于防水、保温屋面的现场喷涂。
44. The T g of polyester soft segment is higher than of polyether soft segment,and the elastic modulus increases in the order of PPG PEG PTMG in the PU elastomer.
在PU弹性体中 ,聚酯软段比聚醚软段的Tg 高 ,弹性模量依PPG、PEG、PTMG软段顺序增加
45. Assumes the rubber elasticity under the room temperature, heats up theelastomer which can flow to be called the thermosplastic elastomer.
在室温下呈橡胶弹性，加热又能流动的弹性体叫做热塑性弹性体。
46. Regarding the optimal formulation of PP/MPP1/CaSO4(97/3/30),blending with adequate dosage of EPDM or TPE(thermoplastic elastomer)respectively, the properties of composite could balance the strength andtoughness.
在性能最佳的复合体系PP/MPP1/CaSO_4（97/3/30）中，分别加入适量三元乙丙橡胶EPDM和热塑性烯烃类弹性体TPE时，可制得强度和韧性较为均衡的三元复合材料。
47. The effect of lead salt stabilizers and stearate stabilizers on the dehydrochlorination of low-halogens flame-retardant PVC/PNBR thermoplastic elastomer was studied by Congo red method.
在研究铅盐类稳定剂、金属皂类稳定剂的单用、并用,对于低卤阻燃PVC/PNBR共混型热塑性弹性体热稳定性能的影响时发现:铅盐类热稳定剂单用时,热稳定效果3PbO>2PbO。
48. Type R all rubber air operated pinch valve with strong elastomer body is ideal for water, chemical, solids and slurry applications.
型全橡胶气动夹管阀采用坚固耐用的人造橡胶阀体，特别适合水、化工、固体颗粒和泥浆等应用场合。
49. NINGBO POLYMAX ELASTOMER TECHNOLOGY CO., LTD.
宁波普力马弹性体技术有限公司。
50. Because the stator consists of elastomer and piezoelectric ceramic, degree of freedom and physical field coupling problem need to be solved.
定子由弹性体和压电陶瓷两种材料组成，不仅存在自由度耦合问题，而且还存在不同物理场的耦合问题。
51. The result indicated that the toughening effect of phenolic foams was best when using the thermoplastic elastomer.
实验结果表明，热塑性弹性体对酚醛泡沫塑料的增韧效果最佳。
52. Container inside lining includes polyurethane elastomer and rubber.
容器内衬分聚氨脂弹性体和橡胶。
53. Development history, manufacture, application and advance of fluorocarbon elastomer coatings were sketched.
对氟碳弹性体涂料的发展史、制造与施工、应用及进展进行了简介。
54. By the right surface modification on mineral,the obvious reinforced effect on the NBR/PVC elastomer was obtained.
对矿物填料进行适当的改性处理,使丁腈橡胶/聚氯乙烯(NBR/PVC)弹性体具有明显的补强效果。
55. By that right Surface Modification on Mineral,it is obvious Reinforced on the rubber/PVC elastomer.
对矿物填料进行适当的改性处理,使橡胶/PVC弹性体具有明显的补强效果。
56. Application of polymer polyol in microcellular polyurethane elastomer(MPUE) was researched.
对聚合物多元醇在聚氨酯微孔弹性体中的应用进行了研究。
57. The preparation of prepolymer for soft PU elastomer and its application were investigated.
对软质PU弹性体用预聚体及使用技术进行研究。
58. The workpiece was considered as elastomer, and was deformation when clamped both by bench clamp and fixture was simulated with ANSYS.
将工件视为弹性体，运用有限元分析软件ANSYS，对采用台钳直接装夹和工装装夹中零件产生的变形进行模拟。
59. N.R.Legge, G.Holden, H.E.Schroeder, "Thermoplastic Elastomer：a comprehensive review,"Carl Hanser Verlag, Munich, Vienna, New York(1987).
小松公荣,"热可塑性弹性体技术手册",谢立生译,台湾复文兴业股份有限公司(1997).
60. They are widely used in high elastic resilient cold cure, microporous elastomer and semi-rigid polyurethane foam plastics.
广泛应用于高回弹冷熟化，微孔弹性体及半硬质聚氨酯泡沫塑料制品。
61. The developments and applications of modified thermoplastic elastomer HMPSA,acrylate HMPSA,silicone HMPSA and amorphous polyolefin HMPSA were reviewed in this paper.
建议国内企业和科研机构开发多种用途的热熔压敏胶,扩大其使用范围,同时应加快压敏胶性能标准化进程。
62. Introducing isocyanurate group can enhance the heat resistance property of polyurethane (PU) elastomer, but has some effects on the other properties of PU elastomer.
引入异氰脲酸酯基团可提高聚氨酯弹性体的耐热性能,但同时对其他性能有一定影响。
63. A trace is automatically recorded of the resistance of the elastomer to penetration and the depth of penetration.
弹性体对于穿透的阻力和穿透深度曲线自动记录下来。
64. Elastomer is a class of polymers whose deformation displayed by strain-stress curve is totally elastic, i.e., large recoverable strains produced at low stress levels.
弹性体是聚合物的一个种类，它的应力－应变曲线表明其变形是完全弹性的，即很低的应力变化就会产生很大的可回复应变。
65. Elastomer Core Material - Soft for great feel, and highly resilient to get the ball rolling quickly.
弹性聚合物核心材质-柔软的击球手感与高弹力、快速的击球滚动。
66. The S-shaped structure is used for elastomer .It has reliable multi-layers pouring pastern sealing .
拉压传感器（S型）弹性体采用S型机构，多层灌胶，密封可靠；
67. The structure and material of traducer elastomer were researched, in order to develop a transducer for micro-electronic balance.
摘要为开发一种微型电子秤用小量程传感器，文章对传感器弹性体的材料和结构进行了研究。
68. Polyethylene octene elastomer (POE) as impact modifier was incorporated into wood/polypropylene composites (WPC) to enhance the impact strength of the composite.
摘要使用乙烯-辛烯共聚物(POE)作为木粉／聚丙烯复合材料的抗冲改性剂，旨在提高木粉／聚丙烯复合材料的抗冲击强度。
69. Numerical simulation and experimental study for injection molding and fiber orientation distribution of short fiber-thermoplastic polyure-thane elastomer composites were done.
摘要对短纤维－聚氨酯弹性体复合材料的注射充模及纤维取向分布进行了数值模拟和实验研究。
70. By using the propagating theory of elastic wave the attenuation mechanisms of the elastomer with cylindrical bores is analyzed.
摘要应用弹性波在带圆柱通道橡胶体内传播的理论，分析了穿孔橡胶体的吸声机理。
71. Structure design of elastomer is the key step of yarn tension sensor design.
摘要弹性体的结构设计是纱线张力传感器设计的关键。
72. Micro-cellular foaming elastomer is an important polymer material, It have become a study hotspot because it can fit many aspects with parlicular capabilities.
摘要微发泡弹性体材料是一种重要的高分子材料，它有其独特的微孔结构能够满足多方面的需要，因此也成为近来一段时间研究的热点。
73. The selection of shrinkage is one of the critical factors in successful design for large casting polyurethane elastomer (CPUE) mold.
摘要收缩率的选取是决定大型浇注型聚氨酯弹性体(CPUE)模具设计是否成功的关键因素之一。
74. The paper presents a new miniature five DOF force/toque sensor for multi-finger dexterous hand, and a highly integrated structure for the elastomer is used in the sensor.
摘要本文介绍了一种新型用于多指灵巧手的微型五维指尖力/力矩传感器。
75. The object of this article is to review progress in the study and development of thermalplastic polyurethane(TPU) elastomer blends.
摘要热塑性聚氨酯是一类具有良好耐低温、高弹性和耐磨性能的新型弹性体。
76. Supported Shaft Seal: Bonding of elastomer to phenolic backing ring protects against distortion, a common cause of shaft leakage.
支撑性轴密封：弹性材料与酚醛背衬环的紧密结合体，有效防止由于扭曲变形导致的轴泄漏。
77. At first,general situation of PVC toughened by elastomer are escribed.Then a new way for toughenine of PVC using rigid matters is introduced in details.
文中首先对通常的弹性体增韧PVC共混合金进行了介绍，其次对近年来发展起来的刚性体增韧PVC的研究内容加以总结和综述。
78. Abstract: Crystallinity and mechanical properties of poly(ester-ether)liquid crystalline elastomer and their fibers were investigated by WAXDand Single Fiber Electronic Tensile Strength Tester.
文摘:利用广角X－射线衍射仪和单纤维电子强力仪对聚酯醚液晶弹性体及其纤维的结晶性和力学性能进行了研究。
79. Abstract: The rare earth-containing PSBR sheet was prepared through vinyl pyridine-SBR (PSBR) latex reacted with rare earth alkoxide, and the thermal oxidation resistance of rare earth-containing composite elastomer was studied.
文摘:利用稀土醇盐与PSBR橡胶乳液进行反应获得含稀土复合弹性材料进行抗热氧化研究。
80. Abstract: The traditional toughening theory by elastomer and the new toughening theory by non-elastomer are reviewed.
文摘:结合一些科研事实，对传统的弹性体增韧理论和非弹性体增韧理论进行了综述。
