electroform

electroform

1. Keywords Artificial neural network;diamond grains-nickel composite film;electroform;prediction;

人工神经网络;金刚石-镍复合膜;电铸;预测;

2. As an example,with this method aided by artificial intervention,the optimum conformal anode used to electroform a nozzle is designed.

以电铸某喷管为例,辅助人工干预的办法,得到了带有屏蔽段的优化象形阳极,使阴极电场强度(电流密度)分布的均匀性得到了改善。

3. Application and Study of Electroless Plating Pretreatment Based on FDM Rapid Prototype Electroform Molding

基于FDM原型电铸制模的化学镀预处理应用研究

4. Keywords composite;mould;electroform;Ni-Co alloy;

复合材料;模具;电铸;镍钴合金;

5. Keywords composite material mold;the metallic mold;electroform;

复合材料模具;模具金属化;电铸;

6. composite electroform

复合电铸

7. The principles of LIGA process on mask, X-ray lithography, electroform and model were analyzed.

对LIGA工艺掩膜、X射线光刻、电铸及塑铸等进行了工艺原理分析。

8. Our products are widely applied into many domains such as Power Supply, electroform, communication manufactures, video products, etc.

广泛应用于电源、电机、通讯产品、视听产品等多个领域。

9. Images on resist are used to electroform metal templates, so the error of parameters between resist image and designed image must be minimized as much as possible.

抗蚀剂图像是用来电铸模压金属工作模板的，因此要求抗蚀剂图像各项指标与设计值之间的误差尽可能小。

10. The electroforming of Ni-Mn alloy for the thin-wall revolving part was carried out with a device that could be used to electroform a revolving part.

摘要利用可以电铸回转体零件的装置，开展了薄壁回转体零件的镍锰合金电铸试验。

11. Finally, the performance of the electroforming nickel layer accords with our use requirements using the optimum process parameters to electroform nickel in a model ship.

最后，采用本文研究得出的最佳工艺参数在一模型船上电铸镍，得到镍铸层的性能符合使用要求。

12. Keywords nickel sulfamate;rotating cylinder Hull cell;electroform;

氨基磺酸镍;旋转圆筒赫尔槽;电铸;

13. Keywords Nickel foam;Electroform;Porosity;Electroless plating nickel;

泡沫镍;电铸;孔隙率;化学镀镍;

14. The application of a new conformal anode to electroform the complex revolving parts

电铸复杂回转零件时新型象形阳极的应用

15. Study on Influence of Electroform Process on Electrical Erosion Resistance of the Tool Electrodes

电铸工艺对工具电极材料抗电蚀性能的影响研究

16. Keywords electroform electrical pure iron;heat treatment;coereive force;microstructure;artificial ageing;

电铸电工纯铁;热处理;矫顽力;金相组织;人工时效;

17. Electroform of skin adopts different kind of current.

皮肤电采用与众不同的特殊电流，使皮肤电阻数据采集灵敏度高，增益调整范围大，适于不同皮肤特性的检测。

18. A special device was designed to electroform the thin-wall revolving parts such as a nozzle with Ni-Mn alloy.

设计了特殊的电铸装置,开展了喷管形薄壁回转体零件的镍锰合金电铸试验。