electroslag
electroslag
1. electroslag remelted steel 3Cr3Mo3W2V
3Cr3Mo3W2V电渣钢
2. Experimental Study of Stainless Electroslag Cladding Process with 90 mm Strip Electrode
90 mm宽带极不锈钢双层电渣堆焊工艺试验研究
3. Keywords GH36 alloy;melting;electroslag remelting;forging;process improvement;
GH36合金;冶炼;电渣重熔;锻造;工艺改进;
4. Keywords H13 die steel;electroslag refining;forging;
H13模具钢;电渣重熔;锻造;
5. Keywords H13 hot-work die steel;Microsegregation;Transvesal impact Toughness;Electroslag;Filling ratio;Melting speed.;
H13热作模具钢;显微偏析;横向冲击韧性;电渣;填充比;熔速;
6. MA Shan-kai.A study on problem of surface swing control of electroslag remelter[J].Journal of Northeast Heavy Machinery Institute,1995,19(2):121-123.
[2]马善凯.关于电渣炉表面摆动控制问题的研究[J].东北重型机械学院学报,1995,19(2):121-123.
7. TIAN Shi-jiang.Application of electroslag technology in china foundary trade [J].Special Casting and Nonferrous Alloys , 2000, 20(3):50-52.
[3]田世江.电渣技术在我国铸造业中的应用[J]特种铸造及有色合金,2000,20(3):50-52.
8. electroslag welding with wire electrode
丝极电渣焊
9. In order to implement the uniform step process of electroslag casting, it is necessary to ascertain the start time of extrusion or the surface of melted metal.
为了实现电渣熔铸曲轴一步整体成型，必须确定挤拐的开始时间，即金属液面的位置。
10. The products of electroslag remelting steel include 243 designations of alloy steel and superalloy.
产品包括优质合金钢与超级合金243个牌号。
11. The electroslag welds were found to have a lower level of fracture toughness than implied from qualification tests
人们发现电渣焊缝的断裂韧性较鉴定试验所给的结果要低。
12. The detection environment, method and new progress of electroslag casting are introduced.
介绍了电渣熔铸金属液位的检测环境、方法和最新成果。
13. The critical construction measures of ensuring the quality of steel bar electroslag welding
保证钢筋电渣压力焊质量的关键施工措施
14. Killed steels, Welding;Electroslag welding;Welding parameters;
关 键 字： Nickel chromium molybdenum steels, Welding;
15. Keywords Electroslag melting and casting;microstructure;steel matrix;WC dissolution;fracture toughness;
关键词电冶熔铸;显微组织;钢基体;WC溶解;断裂韧性;
16. Electroslag casting two-stage (DESCC) ESR is also able to overcome the disadvantage of low efficiency, the use of T-mold.
双级电渣连铸（DESCC）也能克服了电渣重熔效率低的缺点，使用T型结晶器。
17. Experimental investigation of peculiarities of electroslag remelting of waste titanium chip to produce high-Ti ferro-titanium has been performed.
在有衬电渣炉内,对采用废钛屑为原料生产高品位钛铁合金的工艺进行了试验研究。
18. The smelting quality can be improved by controlling the shape of consumable electrode tip, which affects the area of the slag/metal interface in electroslag shaped casting process.
在电渣熔铸过程中控制自耗电极熔化末端锥头形状,扩大钢渣接触面积,可以加强精炼效果。
19. Abstract The grain refinement of the heat resisting steel pipe can be achieved using the method of dynamic effect during the solidifiction of steel in centrifugally electroslag casting.
在电渣离心浇铸耐热钢管凝固过程中，采用动态效应的方法，可以达到细化晶粒的目的。
20. Development of wire oscillating control system for electroslag welding based on PLC
基于PLC的电渣焊焊丝摆动控制系统的研制
21. A method of measuring weight with microcomputer is designed to indirectly detect the surface of melted metal of electroslag casting automatically, according to regular cylinder consumable electrode of electroslag casting.
基于电渣熔铸曲轴的自耗电极为规则圆柱体,根据测重法工作原理设计了一套微机控制检测系统,实现了电渣熔铸金属液面的间接自动检测。
22. Keywords Compound Roll;High Speed Steel（HSS）;Electroslag Remelting;Continuous Csating;Spary;
复合轧辊;高速钢;电渣重熔;连续浇注;喷射;
23. The transmission system of electroslag remeling rate controlling was analyzed.The fashion of melting control and control methods was discussed.
对电渣炉熔速控制采用的传动系统的优缺点,熔速控制采用的几种方式和现有的控制方法进行了对比分析。
24. Magnetic field control of the layer forming in strip electroslag overlap welding process
带极电渣堆焊层成型磁场控制
25. Application of Switch Control With Dead Limits in Automatic Feeding of Electroslag Casting
带死区的开关量控制在电渣熔铸自动进给中的应用
26. centrifugal induction electroslag casting
感应电渣离心浇
27. Keywords Centrifugal Induction Electroslag Casting;Steel H13;Metallurgy Quality;Slanting Roller;
感应电渣离心浇铸;H13钢;冶金质量;斜轧辊;
28. Keywords centrifugal induction electroslag casting;inclusions: casting;
感应电渣离心浇铸;夹杂物;铸件;
29. Our company is a jointly owned Chinese-foreign enterprise integrated with smelting, electroslag refining, forging, steelrolling, finishing and tool manufacture.
我公司是一家集冶炼、电渣重熔、锻造、轧钢、精整、工具制造于一体的中外合资企业，东工牌系列产品被评为浙江省著名商标。
30. Keywords vibratory weld conditioning;electroslag welding;acceleration;welding joints;properties;
振动调制焊接;电渣焊;加速度;焊接接头;性能;
31. resistance electroslag welding
接触电渣焊
32. Abstract The quality and service performance of large cold roll produced by electroslag remelting (ESR) ingot can be obviously improved.
摘要 电渣重熔（ESR）钢所生产的冷轧辊能显著改善冷轧辊质量，提高轧辊使用性能。
33. Electrode regulating is a key link in electroslag furnace for energy saving and metallurgical quality improving.
摘要电极调节是电渣重熔炉的重要环节，是节约电能、提高冶金质量的关键。
34. The technological parameters determine the metal pool profile and the grain size and orientation in the electroslag remelting process, and thus affect the the quality of the final ingot.
摘要电渣熔铸中的工艺参数决定金属熔池的形状和微观晶粒的尺寸及取向，并最终影响熔铸钢锭的质量。
35. The flow of the molten slag pool determines the temperature distribution and the pool profiles in the electroslag casting process, which finally impact on the quality of ingot casting.
摘要电渣熔铸过程中熔渣的流动决定了熔铸体系温度场的分布以及金属熔池的形状，最终影响熔铸钢锭的质量。
36. The company's main products pneumatic polishing machine (sander) series, the impact of pneumatic screwdrivers series, manual pressure on steel electroslag welding machines.
本公司主要产品气动抛光机（砂磨机）系列，冲击式气动螺丝刀系列，手动钢筋电渣压力焊接机等。
37. The reasons and analysis of quality defects of popular application of vertical rebar electroslag pressure welding in engineering are introduced and methods are presented in the paper.
本文阐明了竖向钢筋电渣压力焊在工程中广泛应用后产生的质量缺陷的原因及分析和如何解决这些缺陷的措施。
38. According to the specification of equipment,the hardware and PLC application software have been designed.This control system has been used in double wires electroslag welding.
根据设备的技术要求设计了系统硬件和PLC应用软件,该系统已用于自制双丝电渣焊设备。
39. The deepness of slag pool is one of the most important technics parameters in the electroslag casting process, which affects stabilization of the process and product's quality.
渣池深度是电渣熔铸过程中重要的工艺参数之一,它直接影响到熔铸过程的稳定和产品质量。
40. electroslag system (dregs system)
渣系
41. consumable nozzle electroslag welding
熔嘴电渣焊
42. APPLICATION OF CONSUMABLE GUIDE ELECTROSLAG WELDING TO PRESSURE VESSEL FABRICATION
熔嘴电渣焊在高压容器制造中的应用
43. Mathematical Model Study on Bath Depth Along with Electroslag Re-melting Process
熔池深度随电渣重熔过程变化规律的数模研究
44. Automatic aluminium material charging equipment for electroslag furnace
用于电渣炉的自动加铝料设备
45. electroslag melting and casting method
电冶熔铸
46. Keywords electroslag melting and casting;WC particles;WC/steel composites;interface reaction layer;wear;
电冶熔铸;WC颗粒;WC钢复合材料;界面反应层;摩擦磨损;
47. Keywords electroslag;remelting;aluminum;titanium;control;
电渣;重熔;铝;钛;控制;
48. electroslag melting process
电渣冶炼法
49. Keywords electroslag metallurgy pressurized electros lag remelting vacuum electroslag remelting electroslag hot-topping e lectroslag rapid remelting electroslag clading;
电渣冶金;高压电渣重熔;真空电渣重熔;电渣热封顶;快速电渣;电渣复合;
50. Recent Development of Electroslag Metallurgy
电渣冶金的最新进展
51. Electroslag Heat
电渣加热
52. electroslag pressure welding
电渣压力焊
53. Quality defects of electroslag pressure welding adapter and preventive measures
电渣压力焊接头质量缺陷分析及预防措施
54. Analysis on technical characteristic of steel bar welding by using electroslag welding machine
电渣压力焊钢筋连接工艺的技术性能分析
55. When producing the rare earths Fe-Cr-Al alloy by electroslag remelting method, the optimum quantity of rare earths added to three phase lining electroslag furnace is 0.5%.
电渣双联法生产稀土铁铬铝合金时,稀土在三相有衬电渣炉中的最佳加入量为0.5%。
56. NUMERICAL SIMULATION IN ELECTROSLAG ROLL CLADDING EQUIPMENT DESIGNING
电渣工艺复合轧辊制造装置数值模拟辅助设计
57. VOD Refining of 17-4 PH Stainless Steel for Electroslag Consumable Electrodes
电渣母材用17－4PH不锈钢的VOD精炼
58. electroslag process
电渣法
59. electroslag furnace
电渣炉
60. electroslag hot-topping
电渣热冒口
61. electroslag welding
电渣焊
62. Keywords electroslag welding;dual-phase heat treatment;toughness;
电渣焊;双相区热处理;却贝冲击韧性;
63. Application of electroslag welding in welding of 5#,6# blast furnace shell
电渣焊在5#、6#高炉炉壳纵缝焊接中的应用
64. Keywords electroslag welding joint;fracture mechanics;normalize;anneal;
电渣焊接头;断裂力学实验;正火;退火;
65. electroslag welder
电渣焊机
66. electroslag melting
电渣熔炼
67. electroslag casting
电渣熔铸
68. Big-diameter Crankshafts Produced by Electroslag Casting and Welding
电渣熔铸-熔焊法生产大直径内燃机曲轴的工艺研究
69. A STUDY ON THE PROPERTIES OF ELECTROSLAG CAST 30CrMnSiNiA STEEL
电渣熔铸30CrMnSiNiA钢性能的研究
70. AUGER ANALYSIS OF INTERDENDRITIC FRACTURE IN ELECTROSLAG REMELTED 35CrNi3MoV STEEL
电渣熔铸35CrNi3MoV钢枝晶间断裂的俄歇分析
71. Keywords Electroslag casting Cladding material;
电渣熔铸;复合材料;
72. Keywords electroslag smelting casting;large post serrate driller;surface quality;service life;
电渣熔铸;大柱齿钎体;表面质量;使用寿命;
73. Keywords electroslag remelt;interdendritic fracture;segregation;SAM;
电渣熔铸;枝晶间断裂;偏聚;扫描俄歇探针;
74. Keywords Electroslag Remelting Casting;Temperature Feld;Electric Field;Coupling;Numerical Simulation;
电渣熔铸;温度场;电场;耦合;数值模拟;
75. Keywords Electroslag casting;Current;Self-consumable electrode;Melting;
电渣熔铸;电流;自耗电极;熔化;
76. Study on the High Temperature Region at Slag Bath Center in the Electroslag Casting Process by Simulation and Experiment Method
电渣熔铸中渣池中心高温区的模拟与实验研究
77. Research on the Influence of the Slag Pool Depth on Temperature Field in the Process of Electroslag Casting by Numerical Simulation
电渣熔铸中渣池深度对渣池温度场影响的模拟研究
78. Study on the Influence of Self-Consumable Electrode's End Shape by the Slag Pool' deep in the Electroslag Casting Process
电渣熔铸中渣池深度对自耗电极端部形状的影响研究
79. Research on the Influence of the Depth of Slag Pool on the Depth of Metallic Bath Using FEM in the Process of Electroslag Casting
电渣熔铸中渣池深度对金属熔池深度影响的有限元模拟
80. Study on the Influence of High Temperature Region at Slag Bath Center to the Electrode's Melting in the Electroslag Casting Process
电渣熔铸中渣池集中高温区对电极熔化的影响研究
