empennage

empennage

1. Analyze the impact of empennage on the pose control of FMAVs and develop the moment model.

为了有效地调整复合控制拦截弹的姿态运动,提出了一个姿态控制方法。

2. The choosing of different empennage types, arrangement and geometry parameters of empennage, as well as problems in different design phases, were discussed.

分别讨论了尾翼型式的选择、尾翼的布置以及尾翼的几何参数的选取等不同的设计阶段所面临的问题。

3. Front tail bar gear Back empennage active gear

前尾杆齿轮、后尾翼主动齿轮

4. Calculate the Lift Coefficient of A Swept-back Trapezoid Flatbed Empennage

后掠梯形平板弹翼升力系数的计算

5. The aerodynamic interference is very strong in the zone of the dispenser's empennage.

在布撒器尾翼区子弹的气动干扰量变化很大；

6. Empennage is the critical component of FMAV flight control, for the stability and control of FMAV totally rely on the empennage.

在现阶段，尾翼是微型扑翼飞行器飞行控制不可缺少的重要部件，微型扑翼飞行器完全依赖尾翼保证其稳定性和操纵性。

7. On the basis of these researches, this dissertation summarized the design methodology and process of the FMAV empennage.

在研究了微型扑翼飞行器及其尾翼的特点的基础上，本文总结了微型扑翼飞行器尾翼设计的方法和基本过程。

8. Study on Isothermal Forming Technology for Complex Empennage

复杂尾翼等温成型工艺研究

9. Keywords Empennage Superplastic forming Extrusion Optimization;

尾翼;超塑成形;挤压;优化;

10. Upper and down fixed cover of empennage

尾翼固定上下盖

11. Influence of empennage on flow over upswept after-body

尾翼对民机后体流动特性的影响

12. empennage outspread

尾翼展开

13. Research of balance test technology in empennage outspread

尾翼展开部件测力天平技术研究

14. Effectively Analyzing Aeroelastic Model Empirical Design for Empennage Non-Lift Type Buffeting and Its Wind Tunnel Test Data

尾翼气动弹性抖振模型设计与抖振试验研究

15. Outer belt gear of empennage

尾翼皮带外轮

16. empennage flap

尾翼调整片

17. The rigid-visco-plastic finite element model of hot forming process for empennage epedestal was established.Two forming processes were simulated and analyzed by 3D FEM.

建立了尾翼支座成形工艺的刚粘塑性有限元模型,采用三维有限元法对该零件两种成形工艺进行了模拟分析,确定合理的成形工艺。

18. Preflight Check:Cockpit,Empennage,Left Wing,Nose Scetion,Right Wing.

很顺利的联系签派和地面之后，开车滑行。

19. cantilever empennage

悬臂式尾翼

20. Abstract: This paper presents the test program and the ＂building-block＂ approach of the 777 composite empennage structure.

摘 要: 重点分析了波音777复合材料水平尾翼和垂直尾翼设计试验体系的构成及内容。

21. Finally, improvement measures have been presented in the empennage and the cross section of the automobile body.

最后从汽车的车身尾翼、车身横断面、阻风板等方面提出汽车侧风稳定性改善措施。

22. Finite Element Analysis of Empennage of a Special Bullet

某型特种弹尾翼片的有限元分析

23. Ramp Control, UN001, our empennage seems to have been struck.

现场，UN001，我们的飞机尾部好像被撞了。

24. Pitching Dynamics modeling and Empennage Structure Parameters Evaluation of Unmanned Autonomous Air-ship

自主飞艇俯仰角动力学建模及其尾翼结构参数的确定

25. The empennage after car tail section has roof and LED taillight come dash forward show its distinctive beautiful pattern athletic style and feeling of science and technology.

车尾部分则有车顶后尾翼与LED尾灯来突显它独特的美式运动风格与科技感。

26. Existing producing condition of complex empennage (aluminum alloy LD10) faces many problems, such as poor precision, weak mechanical properties.

针对复杂尾翼件(LD10)生产中存在的精度低、力学性能差的实际问题,研究了尾翼等温成型技术,并优化了工艺参数。

27. The airship, which has push equipment, is made up of hull, empennage, pendant cabin, push equipment etc.

飞艇是具有推进装置的浮空器,由艇体、尾翼、吊舱和推进装置等部分组成。

28. The airship which has push equipment, is made up of hull, empennage, gondola, etc.

飞艇是具有推进装置的浮空器，由艇体、尾翼、吊舱和推进装置等部分组成。

29. Preliminary Analysis of Non- linear Vibration Characteristic of Aircraft Empennage

飞行器尾翼结构的非线性动态特性初步分析