epicyclic

epicyclic

1. 2K-H epicyclic gear trains

2K-H型周转轮系

2. The Development of SKD61 Steel Die for Forging Epicyclic Gear

SKD61模具钢行星齿轮精锻模的研制

3. epicyclic irain

[机] 周转齿轮系

4. An outfielder's empirically based "theory" of missiles is reminiscent of the latter stages of Ptolemic epicyclic models.

一个棒球外场手，他那种基于经验所形成的空中飞行物的“理论”，其实就很像托勒密本轮模型的后期阶段。

5. It has simpler structure, easier making and installation, lower noise than ordinary gear drive.Especially, unlike ordinary epicyclic gear, its installation will not be limited by the number of gears.

与齿轮传动相比结构简单，制造安装方便，噪声小，特别具有不受行星齿轮传动齿数安装条件限制的优点。

6. compound epicyclic reduction gear

两级行星减速器

7. This paper introduces the epicyclic reduction arrangement applied in cutting drive mechanism in pipe jacking,analyses the construction and characteristics of epicyclic reduction arrangement.

介绍顶管掘进机截割传动装置所采用的行星齿轮减速器,论述行星齿轮减速器的结构特点。

8. Based on graph theory,a kind of graph representation is proposed to express the topological and kinematic structure of 2K-H epicyclic gear trains(EGTs).

以图论为基础,提出了一种2K-H型周转轮系构造的图表示法,可以有效地表示周转轮系的拓朴与运动构造。

9. reverse epicyclic gear train

倒车行星齿轮系

10. Tooth Profiles and Structural Characteristic of Ring Gear of Epicyclic Drive with Eccentric Wheel and Push Rod

偏心轮推杆行星传动内齿圈齿廓及其结构特性研究

11. Studies on Mesh Efficiency of Epicyclic Drive with Eccentric Wheel and Pushrod

偏心轮推杆行星传动的啮合效率分析

12. The principle of transmission, basic structure, transmission ratio, meshing parameters and transmission efficiency of this kind of epicyclic transmission were discussed and analyzed in this paper.

分析了这种行星传动的传动原理、基本结构、传动比、啮合参数和传动效率。

13. The Calculation of the Rotating Velocities of Epicyclic Gear Train by the List Sum Method

列表叠加法计算行星轮系的转速

14. Optimal design of NGW type two-stage epicyclic gear train

双级NGW型行星轮系的优化设计

15. New method for calculating the transmission ratio of dual epicyclic train

双重周转轮系传动比计算的新方法

16. Hsu, C. H., 2002, "An Analysis Methodology for the Kinematic Synthesis of Epicyclic Gear Mechanisms," ASME Journal of Mechanical Design, 124, pp. 574-576.

吴益彰，自行车五速内变速机构之设计，国立中山大学机械工程研究所硕士论文，中华民国八十六年六月。

17. epicyclic drive

周转传动 周转齿轮传动

18. epicyclic gear drive

周转传动

19. epicyclic reduction gear

周转减速装置

20. epicyclic clutch brake

周转离合器闸

21. epicyclic arm

周转臂

22. epicyclic gearing

周转轮系 行星齿轮传动

23. epicyclic gear trains

周转轮系

24. A SIMPLE AND EASY METHOD FOR CALCULATING THE TRANSMISSION RATIO OF EPICYCLIC TRAIN

周转轮系传动比计算的简易求法

25. An Elementary Unit-Combined Method for Creative Design of Epicyclic Gear Train

周转轮系创新设计的基本单元组合法

26. A Study on Inner Torque, Power-Flow and Self-Locking of Epicyclic Gear Trains

周转轮系的内力矩、功率流与自锁

27. A study on the evolution and association of epicyclic gear train

周转轮系的演化与组合研究

28. Discrete Analysis Method of Epicyclic Gear Trains

周转轮系的离散分析法

29. Computer Aided Kinematic Analysis And Synthesis Of Epicyclic Gear Mechanisms

周转轮系的计算机辅助运动分析和运动综合

30. The Tabular Method of Kinematics Analysis of Epicyclic Gear Trains

周转轮系运动分析的列表法

31. epicyclic train of gears

周转齿轮系

32. The 1st reduction gearing is epicyclic type with an extended 1 st reduction shaft pinion coupled from the AC motor and driving the 1 st planets.

周转齿轴与交流电动机耦合，驱动一级行星齿构成第一级减速。

33. An outer gear that revolves about a central sun gear of an epicyclic train.

围绕本轮列车的中心齿轮旋转的外部齿轮。

34. Motion characteristics of cylindrical teeth epicyclic gear train

圆齿行星传动运动特性

35. Based on the graph theory model,the formula of freedom to calculate the new circle epicyclic gear trains is deduced.

基于图论模型,推导出了新的计算周转轮系自由度的公式,通过拓扑单元回路法提出了计算周转轮系传动比的新方法。

36. The Research and Design on Epicyclic Reduction Gear Unit in Application to Tower Crane

塔式起重机行星齿轮减速机的设计研究

37. Closed epicyclic gear train

复合轮系

38. A study on computing method of transmission ratio of complex epicyclic gear trains

复杂周转轮系传动比计算方法研究

39. epicyclic train

外摆线轮系 行星齿轮系 周转轮系

40. Study on the new inner planar moving spur gear typed epicyclic gear transmission with few teeth difference

外齿轮内平动式新型少齿差行星传动的研究

41. A study on the design of closed epicyclic gear trains with larger reduction ratio

大减速比封闭式周转轮系的设计研究

42. It can adopt saw cutting or epicyclic cutting type.

它可以通过看到切割或行星切割型。

43. epicyclic reduction gear star type

定星式周转减速齿轮

44. epicyclic reduction gear of star type

定星式齿轮减速箱

45. Teh repot relative failure analyzed epicyclic gear of early serious failure make use of macrographic examination and micrographic observation and advanced correct ways.

对早期严重失效的行星齿轮进行宏观和微观组织检测对比分析，提出改进措施。

46. Closed epicyclic gear trains

封闭式周转轮系

47. Convenient Algorithm for the Power Flow of Closed Epicyclic Gear Train

封闭式周转轮系功率流的简易算法

48. A study on the train ratio of closed epicyclic gear trains and its law

封闭式周转轮系的传动比及其传动比法

49. Design Manual for Enclosed Epicyclic Metric Module Gear Drives

封闭本轮米制模数齿轮驱动

50. differential bevel epicyclic train

差动伞齿轮周转轮系

51. differential epicyclic gearing

差动调转齿轮装置

52. A unified formula is derived for efficiency of H closed epicyclic gear train.In addition, self locking conditions of ...

并在此基础上 ,推导出 H封闭式周转轮系的效率计算的统一公式 ;

53. A unified formula is derived for efficiency of non-H closed epicyclic gear train.

并在此基础上，推导出非H封闭式周转轮系的效率计算的统一公式；

54. Analysis of Epicyclic Gear Trains by the Equilibrium Conditions of Couple System

应用力偶系平衡条件分析周转轮系

55. epicyclic reduction gear solar type

恒星式周转减速齿轮

56. epicyclic reduction gear of solar type

恒星式齿轮减速箱

57. A kind of new typed epicyclic gear transmission with few teeth differenced inner plane motion of spur gear and possessing practical value was put forward in this study.

提出了一种具有实用价值的外齿轮内平动式的新型少齿差行星传动。

58. This paper presents a new method for the analysis of both Kinematics and dynamics of epicyclic train transmissicn with the matrix system.

提出了一种用矩阵对周转轮系变速器的运动学和动力学进行分析的新方法。

59. First,a dynamic model of the closed epicyclic gear trains,which is suitabl e to transmitting matrix,is established.

提出了考虑并联分支结构的适用于传递矩阵法的封闭周转轮系动力学分析模型。

60. A new symmetrically loading epicyclic traction drive reducer is introduced.It has advantage of high drive ratio of other epicyclic gears.

摘要介绍了一种新型对称加载行星牵引传动减速器，它保留了行星齿轮传动比大的优点。

61. It is an important but difficult job to compute the transmission ratio and the meshing efficiency of epicyclic gear trains.

摘要周转轮系的传动比与啮合效率计算是一件重要的也是使人感到困难的工作。

62. When the meshing efficiency of closed epicyclic gear trains is computed, the method of drive-ratio is used often.

摘要在计算封闭式周转轮系的啮合效率时，常用传动比法。

63. A description was carried out on the complicated epicyclic gear train by adopting the functional schematic diagram and the knowledge of graph theory.

摘要采用功能示意图和图论知识对复杂周转轮系进行描述。

64. CNC Milling Machine Assembled with the Tool Post of New Type Epicyclic Gear Output Mechanism with Flexible Eccentricity

新型变偏距行星齿轮输出刀架的CNC铣床

65. Design and Study of a New Type of Epicyclic Gear Output Mechanism

新型行星齿轮输出机构的设计研究

66. the central gear in a epicyclic train.

本轮列车的中心齿轮。

67. epicyclic orbit

本轮轨道

68. Keywords plates bending machine;m agnetic paricle clutch;Magnetic particle controllable epicyclic reducer;flexible stat;

板料折弯机;磁粉离合器;磁粉可控起动行星减速器;柔性加载;软启动;

69. L.W.Tsai and C.C.Lin, “The Creation of Nonfractionated , Two-Degree-of-Freedom Epicyclic Gear Trains,” ASME Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 111, pp. 524-529, 1989.

林建德，新图论在行星齿轮系运动构造设计之应用，国立中山大学机械工程研究所博士论文，中华民国八十二年元月。

70. A Calculating Method for Epicyclic Motion of Spacecraft

椭圆轨道上航天器位置的一种计算方法

71. The Dynamic Analysis of Floating Plate in Epicyclic Reduction Involute Gear Unit with Small Tooth Number Difference

渐开线少齿差行星减速器浮动盘的动力分析

72. The 3rd reduction gearing consists of three spur shaft pinions which are interference fitted to the 2nd reduction gears and one epicyclic gear (annulus).

第三极减速由三条齿轴与第二级减速齿和轮毂内侧环状齿圈分别干涉耦合构成。

73. The analytic formulations are presented of the epicyclic motion of a spacecraft about the true anomaly and the eccentric anomaly.

给出了沿椭圆轨道运动航天器真近点角和偏近点角的运动方程。

74. A study on self-adapting of winch epicyclic gearing

绞车行星传动机构自适应问题研究

75. Keywords self - adapting;winch;epicyclic gearing;unfreiheit;

自适应;绞车;行星齿轮传动;约束;

76. a system of epicyclic gears in which at least one wheel axis itself revolves about another fixed axis.

至少一个轮轴围绕另外固定轴旋转的传动装置系统。

77. Application of Determinant to Efficiency Calculation of Epicyclic Gear Trains

行列式在周转轮系效率计算中的应用

78. epicyclic gears

行星传动

79. epicyclic belt transmission

行星带传动

80. epicyclic reduction gear of planetary type

行星式齿轮减速