extruded

extruded

1. CTR was fixed in the capsule in 13 eyes and partly extruded out of the capsule in 2 eyes.

13眼CTR植入囊袋内,2眼部分脱出囊袋外。

2. At impact energy of 2.7 J, it is mainly spalling of extruded hardened edge for LCHA, primarily massive fatigue spalling and heavy corrosive wear for HMN and principally massive brittle spalling and heavier corrosive wear for MCA.

2 7J冲击功下,低碳高合金钢主要为挤出硬化棱的剥落,高锰钢主要为块状疲劳剥落和较严重的腐蚀磨损,中碳合金钢主要为块状脆性剥落及严重的腐蚀磨损;

3. It is spread on end face of extruded shim to make shim separate with discard. 3.

2、涂于挤压垫片端面，使垫片与压余分离。

4. Materials extruded have been plasticized evenly.

5、 配备的强力干燥设备能有效地解决高速生产过程中滴灌管的带水问题。

5. BIH, and the density and foam structures of the extruded free low foamed HIPS properties, the influence of the crosslink-ing agent and nucleator on HIPS product were discussed.

BIH与HIPS挤出自由低发泡制品的密度和泡孔结构的关系,以及交联剂、成核剂对制品的影响,并利用偏光显微镜观察了泡孔结构形态。

6. GLE is a library package of C functions that draw extruded surfaces, including surfaces of revolution, sweeps, tubes, polycones, polycylinders and helicoids.

GLE是一个C函数库包，它能绘制突出的表面，包括旋转表面，伸展表面，管状，多角体，多柱体和螺旋面。

7. "Flamingo" is an international brand of construction ceramics owned by Chongqing Fuling Ceramics Group, which includes five diamond series of product on porcelain tile, roofing tile, external tile, crystal glass and extruded tile.

“佛来明哥”是涪陵建陶全新推出的国际化精品建陶品牌，旗下包含玻化石、晶化石、西式石、劈离砖、太阳神外墙砖五大钻石级产品系列。

8. The"pocks"is one of the most important surface defects in extruded aluminium alloy.

“麻面”是影响铝合金挤压材表面质量的主要缺陷之一。

9. A manufactured fiber formed by compound of cellulose, refined from cotton linters and/or wood pulp, and acedic acid that has been extruded through a spinneret and then hardened.

一个制造纤维所形成的复合纤维素，完善由棉短绒和/或木浆，和acedic酸已被挤压通过喷丝板，然后硬化。

10. XPS insulation specialized in the use of rigid extruded polystyrene foam plate and the production of the products of machinery and equipment.

专业从事XPS保温用挤塑发泡聚苯乙烯硬质厚板以及生产该种产品的机械设备。

11. To make winter gear that dissipates moisture but holds in heat, manufacturers use specially extruded hollow fibers that retain insulating air.

为了制造可蒸散水气同时又要保留热气的冬衣材质，业者使用特殊射出的中空纤维，这样可以留住空气，增加隔热的效果。

12. To decrease bending and twist deformation of non-sym metry extruded sections, a new conception of local extrusion ratio and die band ratio has been set up, and also the formulas for the place of die hole on the ba sis of simulating test.

为减小非对称型材挤压的弯扭畸变,在试验研究的基础上,建立了局部挤压比、挤压带系数的概念,挤压筒中心与挤压模孔型中心相对位置的计算式。

13. VPI.Your source for extruded plastic sheet, plastic rollstock and custom plastic extrusion products.

乙烯基塑料公司提供挤压成型塑料板,传统塑料挤压产品。

14. Today large quantities of lead still go into the manufacture of rolled sheet and extruded pipe.

今天，大量的铅仍然用来轧制成铅板或挤压成铅管。

15. An extruded self adhesive tape for lap seam of EPDM sheet has brominated butyl rubber as main ingredient and appropriate aids.

介绍了一种以溴化丁基橡胶为主体材料,加入适当的化学助剂,经挤出成型的三元乙丙橡胶高分子片材搭接缝用自粘胶带。

16. Polypropylene as a matrix was blended with BaSO 4 developing agent, then extruded and granulated by double|screw extruder, and finally X|ray developing fiber was obtained.

以聚丙烯为基体,硫酸钡为显影剂,共混后经双螺杆挤出造粒、纺丝,制得X光显影纤维。

17. PP and PA6 were blended and extruded with a single screw extruder, PA6 could fibrillated in the matrix.

以聚丙烯为基体、尼龙6为分散相共混得到分散相成纤的原位复合材料。

18. Black masterbatches with high degree of jetness, stable colour and excellent dispersion.suitable for the coloration of the injected, blown and extruded products of common resins.

优质黑色色母具备黑度高、颜色稳定及分散性能良好等优越性能，适用于常用树脂的注塑、吹塑、挤塑等制品的着色。

19. The tank shall have extruded magnesium anode rods installed in separate head couplings and extended to within three inches (76mm) of the bottom.

内胆应该配置突出型镁阳极棒,安装在独立的连接口上,并延伸至离内胆底部三英寸(76mm)的地方。

20. All kinds of reasons of extruded die cracked is analysised when profile is hot extruded,and take the method of preventing and remedying.

分析了异型材热挤压时造成挤压模具开裂失效的各种原因,并提出了预防和补救措施。

21. Design and manufacture of extruded plastic parts, blow-moulding, all business sectors. Plastics,...

分类标题：橡胶和塑料挤压|橡胶和塑料吹塑注模...

22. Extruded PVC profiles, textile-reinforced tubes, gardening hoses, irrigation, TRICOT electrical...

分类标题：橡胶和塑料管及管道|花园灌溉设备...

23. Microstructures and mechanical properties of extruded tubes of AZ91+XCa (X=0, 0.5, 1, 1.5 wt. %) alloys were investigated using OM, SEM, XRD and mechanical property test.

利用OM,SEM,XRD及力学性能测试等手段,研究了添加Ca元素的AZ91+XCa(X=0,0.5,1.0,1.5,wt%)合金挤压管材的显微组织及室温和高温力学性能。

24. Beijing Boke Man extruded products limited liability company is set extruded polystyrene for insulation boards (XPS) production, sales and service in one of the modern enterprise.

北京波科曼挤塑制品有限责任公司是集挤塑式聚苯乙烯保温板(XPS)生产、销售、服务于一体的现代化企业。

25. Beipeng Extruded Thermal Insulation Boards feature superfine thermal insulating properties. The thermal resistant value our products is significantly better than any other thermal insulating materials.

北鹏挤塑保温板具有极佳的保温隔热性能,其产品热阻值明显优越于其它保温材料,导热性低而稳定,不受温度也不受湿度变化的影响。

26. Beipeng plastic extruded board can be widely used in planting roofing, a brand new environmentally-friendly heat insulation form, and give good use effect.

北鹏挤塑板可广泛应用于种植屋面这一全新的环保型的保温形式中，其使用效果良好。

27. The results show that the fluidity of extruded state alloy is the lowest.

半固态坯的流动性能是获得优质、复杂制件的基础和关键。

28. The reason is that on a number of extruded compound modification oilysludge, just one layer on the heatsealing layer blending, middle-tier also may be in a lower-cost.

原因是对多层共挤复合基材进行改性，只需在其一层热封层上进行共混改性，在中间层还可采用成本较低的树脂。

29. Factory nade products of extruded polystyrene foan (XPS).

参考名称: Thernal insulation products for buildings.

30. The Film blowing machine's feature is used LDPE as materials, after being heated, extruded, drawn an...

发布者：夏丽丹所在地：浙江温州市行业：机械及行业设备职位：外销员工作年限：

31. Sample with a higher DI value can be extruded easily and corresponded to a small average particle size.However no correlation was observed between pore structure and DI value.

发现平均粒度小和成型效果好的样品有较大的酸分散指数，但酸分散指数与样品的孔结构无直接关系。

32. It was concluded that this defect is not surface crack indeed,but cross extruded wrinkle rising from inhomogeneous deformation.

发现这种缺陷实际并非表面开裂，而是由于变形不均匀造成的横向挤压皱折。

33. Can be used as polystyrene board (EPS) insulation systems and extruded plate (XPS) insulation system of leveling material.

可以作为聚苯板（EPS）保温系统和挤塑板（XPS）保温系统中的找平材料。

34. Because they have been extruded or pored out on the earth's surface, igneous rocks from volcanoes are called extrusive igneous rocks.

因为这种火山岩是熔岩喷出地球表面而形成的，所以称之为喷出岩。

35. With outstanding vapor infiltration and compression resistances, Beipeng plastic extruded board excels in application in refrigeratory buildings.

因材料具有闭孔式蜂窝结构，因而高度抗潮隔气，防止冷凝结露。

36. It is relatively palatable without the sprayed-on fats and other enhancers needed on extruded dry food.

因此它是相对地比较美味，不需要喷洒油脂和其他添加物。

37. The wave forms of the glass building are highlighted by a series of extruded aluminum brush finish mullions, following the vertical, curvilinear shape on the north and south facades.

国际中心的南北立面分别为曲线和垂直线状，一排排铝质磨砂竖框依势外突，凸显了这栋玻璃幕墙建筑物的波浪形效果。

38. Rosette-shaped, extruded aluminum action rails and flanges (grands) provide increased stability and less frequent regulation.

圆形模压铝制的横档和轴架都能提高稳定性从而减少日常整音。

39. Potato starch is used in extruded cereal and snack food products and in dry mixes for soups and cakes.

土豆淀粉用于压模成形谷物、小吃、干的混合汤料和糕点。

40. The results reveal that the solid solution and aging treatments will lead to a change in both cyclic stress response and cyclic stress-stain behavior of the extruded AM50 alloy.

在高的外加总应变幅下,固溶和时效处理可以提高挤压变形AM50镁合金的疲劳寿命,但当外加总应变幅较低时,固溶和时效处理则降低挤压变形AM50镁合金的疲劳寿命;

41. Subway advertisement has strong pertinency, covers large fields, and has extruded effects of the advertisement.

地铁广告的针对性较强，覆盖面广，广告效果突出。

42. The try of success of 100% percent of pass of the forming spout and ultra - short spout, extruded nature exfoliate graphite resistor rod was obtained.

型嘴与超短嘴子，挤压天然鳞片石墨电极合格率100%的尝试获得成功。

43. Plastic material is extruded through very small holes to form fibres.

塑料从细孔中挤压出来形成纤维。

44. Any of various organic compounds produced by polymerization, capable of being molded, extruded, cast into various shapes and films, or drawn into filaments used as textile fibers.

塑胶通过聚合作用制成的一种有机化合物，能被造型，挤压和塑铸成各种形状或薄膜，也可被拉成细丝用作纺织纤维

45. Any of various organic compounds produced by polymerization,capable of being molded,extruded,cast into various shapes and films,or drawn into filaments used as textile fibers.

塑胶通过聚合作用制成的一种有机化合物，能被造型，挤压和塑铸成各种形状或薄膜，也可被拉成细丝用作纺织纤维。

46. Application This line is uesd to shrinking、 cooling、 cutting (or winding) and moving the extruded tire-tread or tire-sidewall from extruder.

备用途：用于将从挤出机挤出的胎面、胎侧半制品，经收缩、冷却，按要求的长度切割或卷曲取并移送到专用的运输工具上。

47. External wall insulation system with three approaches: extruded polystyrene board, commonly known as XPS boards, or expansion of polystyrene board, commonly known as EPS plate.

外墙保温体系有三种做法:用挤塑聚苯板,俗称XPS板,或者膨胀聚苯板,俗称EPS板。

48. The baby extruded his tongue.

婴儿伸出舌头。

49. Obvious yield phenomenon can be observed at true stress-strain curve of compression of extruded alloy as the result of twinning.

孪晶的产生,导致挤压合金室温压缩的应力-应变曲线上有屈服平台出现;

50. Safety glass shall set into rails in deep into an extruded polyvinyl chloride glazing channels.

安全玻璃安装在聚氯乙稀滑槽内。

51. The experiments show that the formulas set up in this pa per can lower the deformation of non-symmtry extruded sections efficiently.

实验证明利用本文提出的计算式进行模具设计能有效地减小挤压非对称型材的弯扭畸变。

52. For the blueberries, I used a NURBS sphere, converted it to a polygon so I could texture it better, extruded the edges to make the leaves and of course reversed normals.

对于蓝色浆果，我同样使用的NURBS球体，这次我将他们转换为了多边形物体，这样我可以更好的为他制作贴图。挤出边来制作叶子，最后翻转了法线。

53. The vesults of our vesearch on low toxicity UF resin for grade of extruded particleboard( perforated) showed: The formaldehyde emission of extruded particleboard made from low toxicity UF resins could meet E2 standard, and E1 standard.

对低毒脲醛树脂制造挤压刨花板(空)研究结果表明:采用低毒脲醛树脂,不仅挤压刨花板甲醛释放量可以满足E2级标准,而且甲醛释放量可以满足E1级标准。

54. This paper conducts perimental studies of the six new and energetic catalysts in the screw extruded energetic propellant with low signatrue.

对六种新型含能催化剂在高能低特征信号推进剂中的应用进行了研究。

55. The machine that makes kibble (chip) from solid and cooled extruded powder coating.

对固体的和冷却的挤出粉末涂料粗破碎的机械。

56. Extruded nylon tape with arrowhead type hooks on both sides of a single base.

带有突出的箭头式尼龙带用来分别钩住双面中的每个单面。。

57. The non-uniform deforming characteristics of extruded piecework have been exposed.It is compared the extrusion process in one-hole die with in two-hole die.It is found ...

并与单孔模型材挤压过程进行了比较,发现双孔模[1]挤压时,变形体内存在两个互为相反方向的涡流场,它们相互抵消,从而可以消除型材挤压过程中产生的扭拧、波浪、弯曲等缺陷。

58. If the extrusion ratio and the extrusion temperature were lower, there were mixed crystal and un-completed recrystallization as strip in the extruded products.

当挤压比较小以及挤压温度较低时,存在混晶组织和未完全再结晶组织,未再结晶的晶粒为长条状。

59. ECDE should be diagnosed when OR>0.58or DTR>0.39,its posterior longitudinal ligament must be incised and extruded disc material should be removed completely.

当椎管侵占率>0.58,椎管矢状径比减小值>0.39,可诊断为硬膜外型椎间盘突出,要求切除后纵韧带,取出椎管内的椎间盘。

60. The product we are thinking about is an extruded PCV product that we can use a die to cut the ends to form the length for the vehicle we want to fit.

我们所需的产品是挤压式的PCV,该产品的长度可以通过金属贴片切割尾部。

61. Our dry ice production equipment has been specially engineered to produce the highest density extruded dry ice available.

我们的干冰生产设备已经过特别设计,能生产出当今最高密度的压延干冰。

62. We assemble big diameter axial impellers for industrial application.Generally here in Italy we buy groups of steel rounds and steel tubes which reinforces our extruded aluminum blades.

我们装配为工业应用的大直径轴向叶轮。在意大利我们通常买成组的钢铁轮和钢管子来加强我们那此被挤压出的铝刀片。

63. All extruded knots of these trees have to be planed to make a column.

所有这些树挤出的木结都要刨平做成一个圆柱。

64. Sheathing layer: PVC extruded polyethylene or in the form ofweaving.

护套层：用聚乙烯或聚氯乙烯挤塑在编织层上而成的。

65. The upper flange of extruded aluminum suffered less sagging than the lower flange which contacted with lower of the polyurethane rubber.

拉伸铝管的边缘上部比边缘的下部承受更小的下垂，边缘下部语聚氨酯橡胶板的下部接触。

66. The door that has an extruded aluminum frame is weather-resistant, shatterproof, and warp-proof.

拥有突出铝框的门抗风雨，不易碎，也不易变形。

67. Most critical problem confronted during extruded forming is melt fracture,using fluorine-bearing modifier can properly e-liminate melt fracture phenomenon.

挤出成型中遇到的最严重问题是熔体破裂,应用含氟改性剂可很好地消除熔体破裂现象。

68. The little pulsation and fast heating in exlrusion are found and pure UHMWPE products with different molecular weights can be extruded.

挤出时脉动小、加热快,并且可以挤出分子量不同纯超高分子量聚乙烯制品。

69. Extruded plastic curls will not disintegrate after forming.

挤压出来的塑料卷曲物在成形后不能再分解。

70. Specification for Extruded Thermosetting and Thermoplastic Semi-Conducting Conductor and Insulation Shields (10.

挤压热固和热塑性半导体和绝缘护套规范(10。

71. The Extrusion Editor also includes an Animation Timeline that allows you to animate the paths of your extrusions over time, allowing for full-fledged morphing of extruded objects.

挤压编辑器还包括一个动画时间线，让您的路径动画的挤压随着时间的推移，允许全面挤压变形的物体。

72. Extruded aluminum alloy cylinder body.

挤压铝合金缸体。

73. The quality of extruded ingot is very important to the quality of aluminum profile.High quality of extruded ingot is the base of high quality of profile.

挤压铸锭的质量对铝型材的质量有着举足轻重的影响,高质量的挤压铸锭是获得高质量铝型材的基础。

74. Extruded magnesium rod anodes are one of the important export products of XMM Co.

挤压镁棒阳极是XMM公司重要的出口产品之一。

75. Extruded magnesium anode are mainly used inwaterboiler,heatexchanger,vapourater,boiler,etc.lt has pro-perty of softingwater,de-dirtresidual,enlong the usinglife,span.

挤压镁阳极主要应用于热水器、换热器、蒸发器、锅炉等设备，有软化水质、排污除污、延长主机使用寿命等优点。

76. The strength testing of extruded catalysts is complicated by three factors when compared to the testing ringformed catalysts.

挤条催化剂的强度测试与环状催化剂相比,复杂的因素有三。

77. Those pathological changes such as waist and leg pains, vertebra in version, kidney basins extruded and substania ossea are contributed to the contused ligament around sacrum joint.

挫伤的韧带失去了固定骨关节的功能,造成骶椎关节微变,引起腰腿痛、椎骨错位、腰间盘突出,骨质增生等病变。

78. Secondly, the technology of using extruded rice as beer adjunct and adding enzymes for beer mashing was discussed.

探讨了挤压膨化大米为辅料生产啤酒的外加酶糖化工艺。

79. This article put forward a method of setting the extruded object in extruding spirals step by step and introduced it s process.

提出了一种分段拉伸螺旋体时确定拉伸对象的方法,介绍了其实现过程。

80. Abstract： The aluminium pick up of stem in extrusion is one of the causes of inwall defects of the extruded aluminium alloy pipe.

摘 要： 穿孔针粘铝是造成铝合金管材挤压时产生内表面擦伤缺陷的主要原因之一。