extrusion

extrusion

1. BOS series auto parts, for example, sunshade cassette, cargo cover extrusion and clearstory orbit, etc.

BOS系列汽车内饰件；系列窗帘支架、天窗导轨；

2. Percentage of undergoing GVBD and the first polar body extrusion in COC groups was higher than that in DO groups ( P<0.05, P<0.01) .

COC各组的GVBD发生率和FP排除率明显高于DO各组(P<0.05，P<0.01)。

3. Cold Jet pelletizers can be equipped with multiple dies to produce various extrusion sizes.

Cold Jet造粒机可以配备多个模具,形成多种不同的干冰挤压尺寸。

4. PVC-pipe unit, large diameter PVC pipe unit, PE pipe unit, PP-R pipe Unit, plastic extrusion units.

PVC双管机组、PVC大口径管材机组、PE管材机组、PP-R管材机组、塑料挤出机组。

5. Liansu has long enjoyed fame in the field of PVC extrusion machinery and molding.

一直以来，联塑机器在PVC挤出设备及模具的领域里享有盛誉。

6. Work with international suppliers and external partners to build up a ceramic extrusion process line.

与国际的供应商和外国合作伙伴一起工作建设陶瓷挤出工艺生产线。

7. We mainly produce aluminum profile, aluminum extrusion, aluminum tube, window and door.

东方铝业欢迎您！我公司专业生产铝材、型材、管、合金门窗、热器等。

8. This central necrosis leads to the gross characteristic of extrusion of cheesy material from the ducts with pressure (comedone-like).

中央坏死导致肉眼下特征性干酪样物质受压从导管内溢出（呈粉刺样）。

9. In the process of south Alps Europe foreland collision,not only the vertical extrusion,but also the lateral extrusion develops.

中部韧性层在南阿尔卑斯和欧洲前陆碰撞过程中 ,既有垂向挤出 ,也有侧向挤出。

10. Provide technical support to QC and production for extrusion powder production batch.

为生产和质检提供铝型材粉末生产的技术支持。

11. Extrusion punches must be coated to prevent galling.

为防止磨损拉伸冲头必须做镀层处理。

12. The main components usually include extrusion die plates, water bath, water wiper, strand pelletizer, shifter, silo and package system.

主要组成部分通常包括，挤出口模板、冷却水槽、风干机、冷切粒机、振动筛和后续料仓包装系统等。

13. VPI.Your source for extruded plastic sheet, plastic rollstock and custom plastic extrusion products.

乙烯基塑料公司提供挤压成型塑料板,传统塑料挤压产品。

14. With knowledge of plastic injection molding, stamping, extrusion, statistics and CPK measurement.

了解塑胶成型,冲压及拉伸工艺,熟练使用统计分析技术。

15. Result No extrusion was found in immobilizing the implant by antogenous cartilage grafting over the end of the implant.

事实并非如此，并发症及效果不满意的发生率相当高，必须高度重视，并切实改善与规范技术措施，才能提高手术的效果。

16. Several apparatuses for improving extrusion, such as gear pump,pressure fluctuation controller,die thickness regulator, etc. , were introduced.

介绍了几种能够提高塑料挤出制品精度的技术与装置,其中包括齿轮泵、压力波动控制器、口模厚度自动调节装置等。

17. Established in1978, Kwong Yu Plastic Factory Ltd. specializes in PVC Compounds- Injection, Extrusion and Blow mold Type.

光裕塑胶厂有限公司于1978年在香港开业，二十多年来专业产销符合欧、、各国家不同的安全标准-原色和透明之聚氯乙烯胶粒。

18. The company is possessing complete set of equipment of encapsulation molding blow moding and extrusion molding.

公司地理位置优越、交通便利。

19. Title： Numerical Simulation of the Temperature Distribution of Warm Extrusion for the Outer-Race (VL.

关键词：温挤压,滑套,数值模拟,温度场.

20. After extrusion processing,the content of SDF has risen from 8.45% to 12.68%.

其中挤压处理后苹果渣SDF的含量由8.45%上升到12.68%;

21. Experienced with mechanical drawing and extrusion die design.

具备机械製图和挤出模具设计经验。

22. Knowledge of Polymer or ceramics extrusion process and equipment is highly desired.

具有塑料或陶瓷挤出工艺和设备知识。

23. Has the unique calf to rub pinches and the full bottom rolls the extrusion massage.

具独特的小腿揉捏及足底滚动挤压按摩。

24. All these factors,combined with extrusion,were applied to the research, so that the instant rice vermicelli has fine appearance and good rehydration.

再结合挤压法对生产速食米线进行了研究与探讨，使制得的米线表面光滑、晶莹透明、复水快，达到真正速食的目的。

25. Stamping/ Extrusion part development includes design, definition, cost analysis and feasibility study.

冲压与拉伸件开发，包括设计，定义，成本分析和可行性分析。

26. The main parameters of open-die cold extrusion without mandrel of thick-wall tube are analyzed.

分析了厚壁管件无芯棒开式冷挤压的主要参数；

27. Extrusion &thermoplastic PC - PA PMMA - Specials thermoplastic, plastic materials, profiles,...

分类标题：塑料型材|橡胶和塑料挤压...

28. Extrusion of profiles, tubes and light diffusers in polycarbonate, methacrylate, abs and blend, for...

分类标题：塑料管道和管子塑料型材...

29. Extrusion of profile sections, tubes, and light diffusers in PC-PMMA-ABS-BLEMD. Extrusion of plates...

分类标题：塑料管道和管子橡胶和塑料挤压...

30. Masterbatches, dyes for moulding, injection, blowing, filming and extrusion of plastic materials -...

分类标题：非食用天然染料非食用工业染料和色素...

31. The extrusion quality of flaxseed meal was studied with Brabender DSE-25 Twin-Screw Extruder.

利用DSE-25型双螺杆挤出机对亚麻籽粕进行挤压膨化质量研究。

32. Using the datum curves from the twin screw extrusion experiment,the correlative factors influencing the fill ratio of screw are analysed.

利用双螺杆挤出实验中的实验数据曲线，对影响螺杆填充率的诸相关因素进行分析。

33. Made of a lightweight aluminum extrusion, the LCR is ideal for low start-up inertia.

制成的轻质铝型材挤压的比例是理想的低启动惯性。

34. The single screw extruder is an important component in extrusion of polyolefin production.

单螺杆挤出机是一个重要的组成在挤压聚烯烃生产。

35. To be responsible to accomplish Extrusion Powder LWR in time.

及时完成铝型材粉末实验室工作.

36. The component metals of the bimetal often fracture during extrusion due to unsuitable parameters.

双金属在挤压成形时，如果工艺参数选用不当，往往导致组元金属的韧性断裂。

37. The superplastic extrusion of MB26 magnesium alloy is also studied.

另外还对该合金的超塑性挤压作了实验研究。

38. Disc extrusion or extrude in 19 cases.

合并椎间盘碎裂或单纯椎间盘突出19例;

39. At the same time the second extruding machine blows out the glue block, and then it extrusion bonds to become.

同时第二台挤出机喷出胶条，挤压复合而成。其内外壁平整光滑，管材壁采用“工字型”结构，耐压抗冲击。

40. Continuously improve the extrusion process capability with quality team.

和质量组成员一起不断地改进注射成型工艺性能。

41. THE PRESENT SITUATION AND ANALYSIS OF EXTRUSION TECHNOLOGY FOR BRAZING FILLER METALS IN THE WORLD.

国外硬钎料挤压技术的现状与分析。

42. Transformation of metal from slug shape to tube shape by the impact extrusion process does mot involve any assembly of parts in the fabrication of collapsible tubes.

在制作(装)膏状物小(金属)管过程中，将条状(或是块状)的金属通过冷挤压转化为管状的工序并不包含任何零件的装配。

43. With a windowed twin screw extruder the authors conduct several visualization extrusion experiments.

在可视化双螺杆挤出实验的基础上，阐述了熔融过程中物料运动的多样性问题。

44. There are more than 1500 plastic extrusion line made by S.W.

在国内外已有1500多条塑料挤出机生产线在运行。

45. Some disulfide bonds might be cleaved during extrusion, and the reaction would be accelerated at higher temperatures.

在挤压过程中，花生蛋白分子内原有的二硫键含量降低，可能发生了部分断裂，高温会加速该反应的进行。

46. The operation and control of equipments had influence on the formation of fisheye in extrusion and granulating.

在挤压造粒过程中,设备的操作控制对晶点的形成也有一定的影响。

47. The manufacturing process-caused ovality of the oil casing significantly influences the extrusion strength of its own.

在石油套管生产过程中产生的椭圆度明显影响套管的承载能力,但是,这个问题一直没有引起人们的充分重视而加以解决。

48. Rugged aluminum extrusion supports the linear rail system through the entire stroke length.

坚固的铝挤压支持通过整个行程长度的直线铁路系统。

49. Parison formation is a critical stage in plastics extrusion blow molding.

型坯成型是塑料挤出吹塑中的一个重要阶段。

50. Thanks the solution to accurate controlling and compelte stabilizing of the extrusion process by employing the melt measuring gear pump.

基于在塑料挤出行业中多年积累的实际经验，精诚模具为解决这些问题，采用融体计量齿轮泵，使系统得到准确的控制和挤出过程中的完全稳定。

51. Based on cup|bar extrusion, this paper presented shear|extrusion technology with advantage of laborsaving.

基于杯杆复合挤提出了剪挤成形技术,认为剪挤成形工艺最大的力学特点是节能省力。

52. Plastic molds: compression molds, extrusion and injection molds, etc.

塑料模具：压塑模具、挤塑与注塑模具等。

53. How to get reasonable design of extrusion die for co-extrusion has become an increasingly imminent and needs to be resolved.

如何合理快速的设计共挤出机头成为目前急需解决的一个问题。

54. Containers for household and chemicals, hollow thin-walled parts, and profile extrusion.

家用和工业用化学品容器、中空薄壁部件以及型材挤塑产品。

55. The extrusion of silica-rich lava, the Rooiberg felsite, occurred on a grand scale.

富于硅氧的岩流及罗依山霏细岩的喷出作用占据了广大面积。

56. The research on extrusion reactive compatibilizers and in|situ compatibilization were introduced in detail.

对反应挤出增容剂及反应挤出增容的研究作了详细的介绍。

57. Secondly, the new advance of mould and pipe calibrator design and pipe extrusion equipment are summarized.

对热塑性塑料管材的挤出模具、定型套和挤出设备的最新发展进行了综述。

58. An example shows the application of the CAD of cold extrusion die for slot wedge.

并结合一个应用实例来说明槽楔冷挤模CAD系统的应用。

59. The influence of frication factor and extrusion speed to load has been analyzed.

并通过模拟分析了摩擦因子和挤压速度对成形载荷的影响。

60. The extrusion of compressible material in plane strain is analysed in use of UBET and compared to fully dense material.

应用上限元方法分析了可压缩材料平面应变挤压问题,并与致密材料进行了比较。

61. The flow behaviour of two polystyrene melts, styron 498 and styron 492J, in extrusion were investigated by using a capillary rheometer.

应用毛细管流变仪,考察了两种聚苯乙烯-Styron498(PS498)和Styron492J(PS492J)熔体挤出过程中的流动行为及其影响因素。

62. The end pressure loss of LLDPE melt in short die extrusion and factors affecting the pressure loss were investigated by using a capillary rheometer.

应用毛细管流变仪,考察了线性低密度聚乙烯(LLDPE)熔体于短口型挤出流动中的末端压力损失及其影响因素。

63. The various product defects during the extrusion of ABS plate, the cause and the corresponding measures are summarized.

归纳总结了挤出成型ABS板材的各种质量缺陷、产生原因及其相应的对策措施。

64. DEKUMA provides total solution for customers, including RUBBER INJECTION MACHINES, BLOW MOULDING MACHINES and EXTRUSION LINES.

德科摩提供全套及完善的生产方案，包括中空成型技术、橡胶注射技术和挤出生产线。

65. The extrusion activated by rapid erosion does indeed appear to build the wall that intercepts the monsoon on its northward trek.

快速侵蚀造成了活跃的挤压作用，看来这确实形成了一道墙，阻隔季风向北移动。

66. We also produce the following projects: Injection Product, Extrusion Product, and Die Cast Product.

我们还生产以下项目：注塑产品、挤塑产品、铸铝产品。

67. We are the largest manufacturer and supplier of flat extrusion dies in China.

我公司是中国最大的挤出平模头制造供应商.

68. Plastic extrusion is kind of plastic pigmentation method that can result in comparetively stable color.

抽粒是塑料染色工艺中色泽较为稳定的塑料染色形式。

69. The Lami husband decides extrusion, regarding the chronic hepatitis B treatment may say that is a milestone.

拉米夫定的推出，对于慢性乙型肝炎的治疗可以说是一个里程碑。

70. The blank treatments before cold extrusion were also drawn up and the die structure of the cold extrusion was designed.

拟制了冷挤压前的毛坯处理及设计了冷挤压模具结构。

71. Extrusion System: frequency variable motor, cycloidal-pin gear speed reducer and high qualitynitrifiedfeed cylinder screw.

挤出系统：变频调速电机、摆线针轮减速箱加优质氮化料筒罗杆。

72. Extrusion deformation can fine the grain of Mg alloy and increase its properties remarkably.

挤压变形可显著地细化镁合金晶粒并提高镁合金的力学性能。

73. Hollow bottle handles could be made in the extrusion blow moulding process.

挤吹瓶子的手柄是中空的。

74. In extrusion blow moulding, the bottle neck is not smooth, and has to be scraped to remove the flashing. This avoids leakage after a cap is put on.

挤吹的瓶子瓶颈不算平整，通常都需要刮去毛边才能保证旋上瓶盖后不漏水。

75. Have knowledge in design and manufacture of stamping, casting and extrusion mould, know about plastic mould.

掌握冲压、铸造、挤压等相关模具设计与制造，了解塑料模具。

76. Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。

77. This paper calculates and analyzes the invalidation in aluminum hot extrusion dies.

摘要文章针对实际生产中铝型材热挤压模具的失效问题进行数值模拟。

78. Two molding techniques were developed, which were screw extrusion molding and froth molding.

摘要研究植物纤维类缓冲包装材料的2种成型工艺：螺杆挤压膨化成型工艺、发泡膨化成型工艺。

79. Thereof, after checking, the extrusion of orifice plate can meet the requirement.

故:经校核,孔板的挤压强度能够满足要求。

80. Data management technology is one of key technology in the extrusion die CAD system.

数据管理技术是挤压模CAD系统中的关键技术之一。