fea

fea

1. Three-body interaction in polydispersion ER fluid is calculated and the structure predicted by FEA agrees well with experimental observation. 3.

2. 观察了多分散电流变液体系的结构，并且采用基于能量的有限元方法对上述结构和相互作用进行了模拟计算。

2. A FEA on the Assembly Parts of 6110 Diesel Engine

6110型柴油机机体组件的有限元分析

3. Keywords CFRC mirror;FEA;Stiffness;

CFRC反射镜;有限元分析;刚度;

4. FEA of Concrete Column Reinforced with CFRP Against Seism

CFRP加固混凝土柱抗震性能的有限元分析

5. Door Structure Design Method by FEA and Experiments

FEA与试验相结合的车门结构设计方法研究

6. Some Nitride Films for Emission Tip of FEA

FEA场发射微尖的一些氮化物薄膜

7. LD and LC had lower hereditability on EW40. The genetic correlation between BW140 and FEA was negative, while LD and LC were positive.

LD系和LC系40周龄蛋重(EW40)的估计遗传力偏低。 W系140天体重(BW140)和开产日龄负遗传相关，LD系和LC系为正相关。

8. ZHENG H, HE X R.Improved preconditioned conjugate gradient method and its applications to FEA in engineering[J].Applied Mathematics & Mechanics,1993, 14(4): 353-362.

[22]郑宏,葛修润.改进的预处理共轭斜量法及其在工程有限元分析中的应用[J].应用数学和力学,1993,14(4):353-362.

9. WANG Zhi-yin, LIU Huai-heng.Visco-Elasto-Plastic FEA and its application to rock mechanics and engineering[J].Journal of Xi'an Mining Institute, 1985,5(1): 86- 105.

[8]王芝银,刘怀恒.粘弹塑性有限元分析及其在岩石力学与工程中的应用[J].西安矿业学院学报,1985,5(1):86-105.

10. WANG Zhi-yin,LIU Huai-heng.Visco-elasto-plastic FEA and its application in rock mechanics and engineering[J].Journal of Xi'an Mining Institute,1985,5(1):86-105.

[9]王芝银,刘怀恒.黏弹塑性有限元分析及其在岩石力学与工程中的应用[J].西安矿业学院学报,1985,5(1):86-105.

11. "The person doing the screening may not know that FEA stands for 'finite element analysis,' so your resume may never get a second glance," says Lyden.

“负责筛选工作的人也许不知道FEA代表‘有限元分析’。因此，如果你的简历中写的是‘有限元分析’而不是FEA，你就可能通不过筛选了。”

12. FEA about a driving box of feeble rigidity and complicated form

一种弱刚度复杂形状传动箱体的有限元分析

13. The FEA of Magnetic Vibration Force for the Three-slot PMDC Motors

三槽永磁直流电机磁振动力的有限元分析

14. 3-dimensional finite element analysis (FEA)

三维有限元分析

15. 3D finite element analysis (3D FEA)

下颌骨

16. M achine structure designed and refined by Finite Element Analysis (FEA) to ensure the rigidity and the optimal machine structure.

与工研院技术合作，针对铸件设计进行有限元素分析(FEA)，以得最佳化的机台结构。

17. The clinic case study results agree well with the FEA results and show that the repair effect is better when the extension plate enwraps lower border of the mandible.

临床病例的分析和验证结论也与有限元分析的基本一致，并得出延伸板包覆下颌骨下缘修复效果更好的结论。

18. Methods: A three-dimensional finite element model of edentulous mandible with implant was established by using spiral CT scan, image process, and CAD and FEA software.

为临床设计种植义齿治疗方案提供理论依据。方法：使用螺旋CT扫描、CAD技术、有限元软件等，建立含牙种植体的下颌骨三维有限元模型；

19. In order to improve the level of frame designation, guarantee the competitive ability of the entire vehicle in the market, we must heighten the FEA technique of the frame to a strategic level.

为了促进车架设计水平的提高,保证整车在市场上的竞争能力,必须将车架有限元分析技术提高到战略的高度上来。

20. To reduce the weight of the whole reducer, the FEA software ANSYS is adopted for the shape optimization design of the ring-plate in the double crank four ring-plate cycloidal pinwheel reducer and a good result is achieved.

为了减轻整机重量，采用有限元分析软件ANSYS对双电机驱动双曲柄四环板摆线针轮式减速器中的环板进行了形状优化设计，得到了良好的效果。

21. To enhance expandable ability of expandable screen shell,a circular bellow shell is designed and its expandable ability is analyzed by non-linear FEA method.

为提高保护外壳的膨胀性能,提出了圆形波纹管形式外壳的设想,并采用非线性有限元方法分析了其膨胀性能。

22. Several method are brought forward in order to improve the computation efficiency of the FEA of sheet forming.The Influence of virtue speed on the numerical simulation is also investigated.

主要介绍了提高板料成形有限元分析计算效率的几种方法,并通过实验研究了虚拟速度对有限元分析结果的影响。

23. An advanced technology of semi-dry gas desulfuration is introduced in the article. The technology has fea tures such as few equipment ,simple technology,low invest,little space and low maintenance.

介绍了一种先进的半干法烟气脱硫技术，对其工艺流程、技术特点进行了较详尽的描述.该工艺具有设备少、工艺简单、投资省、占地面积小、维护费用低等特点。

24. A static analysis of steady temperature profile for tire with FEA was made.

介绍了轮胎稳态温度场分布的有限元静态分析。

25. The influence of bead structures of triangle radial expanded model and L shape expanded model on the stress of bead wires was analyzed,and confirmed by FEA.

从理论上分析三角形径向扩张模式和L形扭转扩张模式胎圈结构对钢丝圈应力的影响,并用有限元方法进行计算验证。

26. Fea Myenne Ng has come to the forefront of contemporary Asian Americanliterature after the renowned writers like Maxine Hong Kinston and Amy Tan.

伍惠明(Fae Myenne Ng)是继汤亭亭、谭恩美之后的又一位引起美国读者和评论界关注的华裔作家。

27. Taking the optimization for the turnup height of radial truck tire as example,the application of FEA to the optimization of tire structure was discussed.

作为轮胎结构有限元分析应用于轮胎结构优选方面的例子,探讨了载重子午线轮胎胎体反包高度的优选问题。

28. Tu camisa es fea.

你的夹克是难看的。

29. Thermal stability of the batteries is examined using Finite Element Analysis (FEA) for different environmental conditions, driving patterns, and control strategies.

使用有限元素分析(FEA)在不同的条件状况，驾驶模式和控制策略下来检验电池的耐热性。

30. Keywords AHSS;Roll Forming;FEA;Spring-back;

先进高强度钢;辊弯成型;有限元分析;回弹;

31. To develop the new products we adopt CAD, CAE, CAM, and FEA system.

公司在产品开发中，不断改进国际先进技术，采用cad，CAE，CAM，FEA和有限元分析设计。

32. Secondly, with the FEA software ANSYS, the combined FEA model of the special-shaped SRC column is designed and it is nonlinearly analysed.

其次,利用大型有限元软件ANSYS,建立这种异形型钢混凝土柱的组合式有限元模型,并进行非线性分析。

33. A novel FEA model of the precise bearing-outring grinder is built and based on the model the influence of the bed structure on its dynamic behavior is studied.

其过程如下,首先建立了磨床的有限元模型,并分析了床身中筋板结构对床身动态特性的影响。

34. The FEA and test results of typical rubber components in the railway vehicle are listed, including the stress, strain, fatigue performance and stiffness etc.

再列举了几种典型机车车辆用橡胶零件的有限元分析和产品试验结果对比情况，包括应力、应变、产品的疲劳性能、刚度性能等。

35. This paper analysized the causes of roofing leakage, introducedthe fea twer and construction method of new PVC waterproofing grease.

分析了屋面渗漏的成因，介绍了pvc新型防水油膏的特点及施工方法。

36. The static temperature field distribution of flanged joints was simulated by 3-D FEA,the results show that the calculative values accord well with data of the measurement.

利用3-D有限元法模拟了法兰接头的稳态温度场分布,结果表明计算值与实测数据吻合较好。

37. The simulation on medium frequency induction hardening process of crankshaft in 6110 engine is carried out by using FEA software ANSYS with hardening depth predicted and residual stress calculated.

利用ANSYS有限元分析软件,进行了6110钢曲轴的中频感应淬火过程的模拟计算,并预测了淬硬层的深度,计算了淬火后的残余应力分布。

38. A laser forming FEA system has been developed by using VB and APDL which is a secondary development tool provided by ANSYS.

利用VB及ANSYS提供的二次开发工具APDL,开发了界面友好的板料激光成形有限元分析系统。

39. The effect of the carcass angle on the endurance of TBR tire bead was investigated by FEA.

利用有限元分析方法研究胎体帘布角度对载重子午线轮胎胎圈耐久性能的影响。

40. When adopting FEA to model, DFC could not only apply into incremental approach with a fully coupled elastic and plastic damage model, but to one step inverse approach.

利用有限元方法模拟时，韧性断裂准则既可以应用到完全耦合的弹塑性损伤模型的增量方法中，也可以应用到一步有限元逆算法中。

41. By utilizing FEA application and experiments, design theory and design calculation method is tested.

利用有限元软件及实验对设计理论及设计计算方法进行了必要的验证；

42. Secondary development was carried out by combining the methods of finite element analysis (FEA) about gas lubrication with the slide bearing analysis module of Marc. The static properties of aerostatic bearing were obtained.

利用通用有限元软件Marc中的滑动轴承模块,结合气体静压润滑问题的有限元理论分析方法,对该模块进行二次开发,求得气体静压轴承的静态特性,并通过实验加以验证。

43. With the advent of very powerful desktop workstations, FEA is now available at a practical cost to virtually all engineers and designers.

功能强大的桌面工作站的出现，使工程师与设计师应用有限元分析技术能以较低的费用得以实现。

44. In some FEA software, other higher order types of elements are also possible (e.g. hexagonal prisms).Some higher order elements also have additional nodes along their edges.

在一些有限元软件中，还提供一些其它的高阶单元，这些单元在边上还会有附加节点。

45. The critical pile length is calculated herein,and the solution is compared with the FEA solution that verifies the validality of the method developed in this article.

在此基础上,推导了柔性桩临界桩长的计算公式,并与有限元方法的计算结果做了比较。

46. Length of the zygoma fixture, and the number of the conventional fixtures, Biomechanical properties of design were evaluated using finite element analysis (FEA) method.

在此模型基础上，模拟上颌骨单侧骨缺损状态，并依照临床修复情况，设计上颌骨单侧缺损的修复方法，利用有限元方法评价该设计的生物力学性能。

47. Fast rack design based on FEA

基于有限元分析的货架快速选型

48. Meshing to minish analysis error is a concerned problem in FEA.

如何划分网格以减小分析误差是有限元分析中令人关心的问题。

49. Quittrying to fea monger here, it doesn't work when eveyone thinks youneed to be in the nut house.

如果在此论坛发帖，互联网上的所有人都可以看到您的电子邮件地址。

50. FEA of stresses in radial tire belt

子午线轮胎带束层中应力的有限元分析

51. Nonlinear FEA for contact deflection of radial tire

子午线轮胎接触变形的非线性有限元分析

52. Nonlinear FEA of radial tire free rotation

子午线轮胎自由旋转的非线性有限元分析

53. L. B. Lessard, J. A. Nemes, P. L. Lizotte, “Utilization of FEA in the design of composite bicycle frame” , Mechanical Engineering Department 1994.

宋宜骏，复材自行车架重新设计与力学分析，硕士论文，国立中山大学机械与机电工程研究所，2005年。

54. Specific structure design, 3D modeling, virtual assembly and finite element analysis (FEA) on chief parts of the new-type DISCO CVT based on low sliding rate and constant power are finished successfully.

完成了新型低滑动率恒功率行星锥盘无级变速器的具体结构设计及三维建模、虚拟装配和主要零部件的有限元分析。

55. For the laminated rock body it can be determined as horizontally isotropic continuous media in FEA.

对于层状岩体，在有限元方法中可将其当成横观各向同性的连续介质进行计算。

56. For frequent connection ways,such as rigid,weld and bolt,FEA software ANSYS is introduced to do research of simplification way.

对刚接、焊接、螺栓联接或铆接等常用的联接方式使用有限元分析软件ANSYS进行简化方式的研究。

57. Discussion on the Evaluating Method of FEA Result

对有限元分析结果判定方法的探讨

58. Then it expounds the relative theory of FEA, and chooses I-DEAS as the tool.

对有限元法的相关理论进行了阐述，并选定I-DEAS作为有限元分析的工具软件；

59. Design parameters can meet design requirements well according to validation of FEA thermal anal...

对比计算结果表明：两种设计计算结果基本吻合,能够满足设计要求。

60. FEA of High Rock Slope and Its Simplified Method

岩石高边坡的有限元分析及其简化分析方法

61. Almost all FEA programs use the mid face and assign thickness attributes.

差不多所有的FEA程序都是使用中性层并且分配厚度属性.

62. FEA and design of rectangular vacuum furnace with cooling jacket

带夹套水冷矩形真空炉的有限元法分析设计

63. Then,the temperature field is loaded in FEA software to predict thermal stress and deformation.

并以此温度场为边界条件,利用FEA软件计算了机体热应力和热变形。

64. The results of FEA method for cold-bending elbow predicted that the point of maximum stress is transferred from intrados to extrados with the increase of the wall thinning.

并应用有限元方法分析了冷弯弯头的应力状况，得出其最大应力发生点随着外拱处壁厚减薄量的增大而向外拱处转移。

65. It was analyzed and calculated through final element analysis (FEA) and the profiles of tile magnetic field and corves of magnetization were plotted.

并通过有限元方法对其进行分析计算，绘制了该电机的磁场分布图和磁化曲线簇。为该电机进一步分析、改良提供了重要的依据。

66. FEA for clamp fittings of Guangzhou subways

广州地铁一号线抱箍类零部件有限元分析

67. A novel FEA model of the precise centreless grinder is built and based on the model the influence of the bed structure on its dynamic behavior is studied.

建立了无心外圆磨床的有限元模型,并分析了床身筋板结构对床身动态特性的影响。

68. Elastic constants of RVE are obtained by using FEA software, ANSYS tosimulate, which provide an effective way to FEA calculation.

建立复合墙板的代表性体积单元(RVE)模型,并应用有限元分析程序ANSYS对此RVE模型进行模拟,获得其等效弹性常数,为结构的有限元计算提供了有效途径。

69. FEA Simulation of Resonant Low-Velocity Gas Flow Microsensor

微谐振式低速气体流速传感器的有限元模拟

70. The wisdom happiness brings lies in the acute insight, it will not be confused by anxiety, nor blured by desperation or tierd, even will not be made blank by fea...

快乐带来的睿智存在于敏锐的洞察力之间，不会因忧虑而含混迷惑，也不会因绝望和厌倦而黯然模糊，更不会因恐惧而造成盲点。

71. We use the FEA software, COSMOS, to simulate different kinds of stree and deformation under different contours of probes so that we can reduce the design time.

探针外型设计使用有限元素分析(FEA)软体COSMOS模拟不同型态探针的应力与变形，以缩短开发时程。

72. Two-dimensional FEA on Bulldozing Shovel

推土铲切削性能的二维有限元分析

73. On the basis of the method, the FEA(finite element analysis)model of the van body in extendable work condition is established and the structure strength analysis of the van body is proceeded.

提出了一种新的合理的加强筋夹芯复合板有限元模型建模方法;

74. Dynamic FEA of the vibrating beam of paver

摊铺机振动梁动态有限元分析

75. Abstract A simplified parametrized model for the concept design of the car side crashworthyness was built based on a detailed finite element analysis(FEA) model of a car structure on the side impact.

摘要 在汽车结构侧面碰撞详细有限元模型基础上，建立了用于汽车侧面结构抗撞性概念设计的简化参数化模型。

76. A parametric structure model has been established using FEA software ANSYS for an aspherical primary reflector with lightening sector holes.

摘要介绍了一种对反射镜轻量化结构进行优化设计的方法。

77. The allowable strength, static strength, fatigue life and load-carrying capability of hydro-bulged rear axle housing in a 0.75 t truck are analyzed using FEA software ANSYS and the variation rule of its strength is obtained.

摘要以0.75t货车液压胀形桥壳为例，利用有限元分析软件ANSYS对其许用强度、静强度、疲劳强度（寿命）及其承载能力进行分析，得到液压胀形桥壳强度的变化规律。

78. The FEA model of three-people seat underframe in the motor train unit was established.

摘要对动车组3人座椅的几何模型，通过简化建立了底架结构的有限元模型。

79. The elastic-plastic finite element analysis (FEA) of typical testing piece with circle hole was carried out by FEA software ANSYS.

摘要应用ANSYS有限元软件对典型构件图孔板进行了弹塑性有限元分析有限元牵与解析解，说明ANSYS辅件计算的可靠性和准确性。

80. In this paper, the FEA model of a three-wheel vehicle frame was established by taking shell as a basic unit.The analysis of static, dynamic and random vibrations was made by using ANSYS FEAS.

摘要建立了以板壳单元为基本单元的三轮农用运输车机架有限元计算模型，利用有限元分析软件ANSYS对其进行了静态、自由振动和随机振动分析。