ferritic

ferritic

1. 1Cr17 Ferritic stainless steel

1Cr17铁素体不锈钢

2. Ferritic Stainless Steel 409L

409L铁素不锈钢

3. 439 Ferritic Stainless Steel

439铁素体不锈钢

4. ferritic steel

adj. 铁素体钢的

5. Cr11 Ferritic Stainless Steels

Cr11铁素体不锈钢

6. Crl 7 ferritic stainless steel

Crl7铁素体不锈钢

7. Keywords IF steel;ferritic rolling;annealing;drawability;texture;

IF钢;铁索体热轧;退火;深冲性能;织构;

8. Keywords ODS ferritic alloy;Creep property;

ODS铁素体合金;蠕变;

9. PROPERTY OF RESISTANCE TO IRRADIATION DAMAGE OF ODS FERRITIC ALLOYS

ODS铁素体合金抗辐照损伤性能

10. Keywords ODS ferritic steel;hydrogen-ionbombarding;electron irradiation;microstructure;

ODS铁素体钢;注氢;电子辐照;微观结构;

11. P92 steel is a new type of ferritic refractory steel which has quickly developed at home and abroad in recent years.

P92钢是近年来国内外迅速发展的新型铁素体耐热钢。

12. ferritic stainless steel SUS430

SUS430型铁素体不锈钢

13. Keywords ferritic stainless steel SUS430;good ridging resistance;production control methods;

SUS430型铁素体不锈钢;良好抗皱性能;工艺控制方法;

14. T91 ferritic heat resistant steel

T91铁素体耐热钢

15. T92 ferritic steel

T92铁素体钢

16. [Abstract] A soft ferritic stainless steel was introduced which could be manufactured for the commemorative and entertaining coin.

[摘要] 介绍了一种可以制作纪念币以及娱乐用币材料的软质铁素体不锈钢。

17. Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

一般设备用无缝和焊接铁素体与马氏体不锈钢管

18. 4 When joining two different ferritic steels, or when joining ferritic to martensitic steels, the filler metal shall conform to the nominal chemistry of either base metal.

两种不同铁素体钢或铁素体钢与马氏体钢之间的焊接，填充金属应符合任一母材金属的标称化学组成。

19. A soft ferritic stainless steel was introduced which could be manufactured for the commemorative and entertaining coin.

介绍一种可以制作纪念币以及娱乐用币材料的软质铁素体不锈钢。

20. The major defects which appear easily in ferritic stainless stee ls , including crack sensibility at room temperature and ridging are introduced.

介绍了易于在铁素体不锈钢中出现的主要缺陷,包括室温敏感性高和起皱。

21. The features of ultra low carbon,low carbon and high carbon high chromium ferritic stainless steel,as well as their applications in the high ...

介绍了超低碳、低碳和高碳高铬铁素体不锈钢的特点,以及它们在高温浓硫酸和湿法磷酸生产设备中的应用情况。

22. Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

低温受压零件用铁素体和马氏体钢铸件规格

23. Keywords IF steel;ferritic hot rolling;cold rolling;textures;drawability;

关键词IF钢;铁素体轧制;冷轧;织构;深冲性能;

24. Keywords high Cr ferritic;heat resistant steel;welding consumables;

关键词高铬铁素体;耐热钢;焊接材料;

25. The research on thin wall as-cast ferritic ductile iron casting produced in metal mold

利用余热生产金属型薄壁铁素体球铁件的研究

26. Ferritic and Martensitic. for Pressure-Containingg Parts.

参考名称: Specification for Steell Castinggs.

27. Effects of dual-beam irradiation on phase stability in oxide dispersion strengthened ferritic steel

双束强辐照对氧化物弥散强化铁素体型合金强化相稳定性影响

28. EFFECT OF ALLOYING ELEMENTS ON CREEP RUPTURE STRENGTH OF 10% Cr FERRITIC HEAT RESISTANT STEEL

合金元素对10%Cr铁素体耐热钢持久强度的影响

29. Carbon steels and certain ferritic alloys, for example, are subject to the risks of brittle fractures when tested at winter ambient temperatures.

在冬季环境温度条件下进行压力测试时，碳钢和某些铁合金便有可能发生脆裂的危险。

30. Both in the transpassive region and the lower part of the active range existed the preferential dissolution of ferritic phase.

在活化区的低电位段发生铁素体相的选择性腐蚀,较高电位段则发生奥氏体相的选择性腐蚀,两者之间存在一个两相腐蚀区;

31. Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

在过渡范围测定碳素体钢基准温度的标准试验方法

32. Weldability Analysis for Austenitic Steel and Ferritic Steel

奥氏体不锈钢与铁素体钢的焊接性能分析研究

33. Keywords austenitic stainless steel pipe;weld seam;ferritic content;magnetic measurement;metallographic method;chemical analysis-diagrammatical method;

奥氏体不锈钢焊管;焊缝;铁素体含量;磁测法;金相法;化学分析-图谱法;

34. D.J. Alson, A. Duncan, and R. Pargeter, “Guide to the Light Microscope Examination of Ferritic Steel Weld Metals,” Welding in the World, Vol. 29, No. 7/8, pp. 160-177, 1991.

孙咸，”氟化物对不锈钢焊条工艺性及熔滴过渡特性的影响”，材料科学与工艺，第5卷，第4期，第1-4、13页，民国86年。

35. Its subject coverage includes: austenitic, ferritic, martensitic, and duplex steels;

它的主题涉及的范围包括：奥氏体、铁素体、马氏体和双重钢；

36. For the ferritic types, the pearlite proportion within the grain structure of the metallic base material shall not exceed 10 %.

对于以铁酸盐为主要成分的类型，金属材料的颗粒结构中，珠光体含量不得超过10%。

37. Keywords differential dilatometer;T91 ferritic heat-resistant steel;undercooled austenite;critical cooling rate;

差分膨胀仪;T91铁素体耐热钢;过冷奥氏体;临界冷却速度;

38. Developing an Ultra-Low Carbon Deep-Drawing Sheet Steel by Ferritic Hot Rolling Process

应用铁素体区热轧工艺开发超低碳热轧深冲板

39. Following annealing, the microstructure consisting of submicron scale equiaxed ferritic grains and dispersive cementite particles became more homogeneous.

形变组织经过保温后，亚微米级别的等轴铁素体晶粒和渗碳体颗粒弥散分布的复相组织的均匀性程度有所提高。

40. Ma in measurements of improving the quality of ferritic stainless steels are summar ized briefly.

总结了改善铁素体不锈钢质量的主要措施。

41. Our company was founded in 1972, is the production of ferritic cast iron pieces can be above the professional factory.

我公司始建于1972年，是生产铁素体可段铸铁件的专业厂。

42. Effects of Antibacterial Treatment on Microstructure and Properties of Copper-bearing Ferritic Stainless Steel

抗菌处理对含铜铁素体不锈钢组织和性能的影响

43. This paper reports the microstructure,precipitate,distribution and its nonuniformity of oxide dispersoid phase of several ODS ferritic alloys made by the same MA parameters.

报道了在同一机械合金化工艺条件下制造的几种ODS铁素体合金的显微组织、析出相、弥散强化相的分布及不均匀性。

44. It is poi nted out that pretrcati ng with equal diameter is a new wa y for developi ng high energy p rodu ct of perma nent mag net ferrit e.

指出等径预处理为今后研制高能积永磁铁氧体找到了新途径。

45. Abstract : Researches on the antibacterial properties and relevant mechanism of copper-contained ferritic and austenitic antibacterial stainless steels have been made in this paper.

摘要 ： 本文研究了铁素体和奥氏体含铜抗菌不锈钢的抗菌特性及相关机制。

46. The bracket of as-cast ferritic nodular iron breaks due to brittle fracture when it is assembled.

摘要铁素体球铁铸件支架在装配时发生脆性断裂失效。

47. Ferritic heat resistant steels have been recognized as the preferable materials and have been widely used in advanced power plants in view of excellent properties.

摘要铁素体耐热钢以其优良的综合性能而成为超高临界压发电厂锅炉管用钢的首选材料并得到广泛的应用。

48. Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

无缝铁素体和奥氏体合金钢锅炉、过热器和换热器管

49. DEFORMATION OF PLAIN CARBON STEEL IN HIGH TEMPERTURE FERRITIC AREA

普碳钢的高温铁素体区变形

50. There are five classes of stainless steel, namely Martensitic, Ferritic, Austenitic, Duplex and Precipitation Hardening:

有5个类别的不锈钢，即马氏体，铁素体，奥氏体，双相和沉淀硬化：

51. This paper introduces the study of oxidation resistance test and the study of simulation test under the practical condations to a new ferritic heat resistant steel.

本文对一种新型铁素体耐热钢进行了抗氧化实验研究和实际使用条件下的模拟实验研究，证明了实验钢具有优异的抗氧化性。

52. This paper will deal with latest progress of production technologies,new steel grade development and expansion of application areas for ferritic stainless steels in China.

本文将就近年来国内铁素体不锈钢的制造工艺技术、新产品开发及其应用等方面的最新进展情况进行详细阐述。

53. This test is carried out by W practice of American ASTM:A736 86(Standard practices for detecting susceptibility to intergranular attack in ferritic stainless steels).

本试验参照美国 ASTM:A736 - 86标准 (草酸法检测铁素体不锈钢对晶间腐蚀敏感性的规程 )中的 W-试验 .

54. Hydrogen transport in 2205 duplex stainless steel is mainly lattice diffusion in ferritic phase and was confirmed by hydrogen microprint technique.

根据氢原子微印实验之结果，发现氢原子在2205双相不锈钢内部扩散的方式主要为晶格扩散，且在肥粒铁相中之氢渗透速率和扩散率高于沃斯田铁相。

55. Keywords oxide dispersion strengthenning（ODS）; ferritic steel; irradiation; recrystallization;

氧化物弥散强化（ODS）;铁素体合金;辐照;再结晶;

56. The Fracture Toughness of Shaped Ferritic Ductile Iron by Horizontal Continuous Cast

水平连铸铁索体球墨铸铁型材的断裂韧性

57. Development of Ferritic Stainless Steel for Low Temperature Parts in Automotive Exhaust System

汽车尾气排放系统低温端用铁素体不锈钢开发

58. Keywords Auto exhaust system Ferritic stainless steel;

汽车排气系统;铁素体不锈钢;

59. Development of Ferritic Stainless Steel Used in Auto Exhaust System

汽车排气系统用铁素体不锈钢的发展

60. Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding

测定马氏体、贝氏体和铁素体钢电弧焊接金属中可扩散氢含量的标准方法

61. WELDING CONSUMABLES OF HIGH Cr FERRITIC HEAT RESISTANT STEELS USED FOR STEAM POWER BOILERS

火力发电锅炉用高铬铁素体钢焊接材料

62. Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes

焊接铁素体不锈钢给水加热器管

63. The deposited ferritic weld metal shall not contact the austenitic or high-chromium steel cladding.

熔敷的铁素体焊缝金属不应与奥氏体或高铬钢复层接触。

64. RESEARCH AND DEVELOPMENT OF A SPECIAL SOFT FERRITIC STAINLESS STEEL

特种软质铁素体不锈钢的研制

65. The results show that the tested steel can obtain carbide free bainitic ferritic laths with fine microstructure under air-cooling condition.

用透射电子显微镜对这种钢在空冷状态下的显微组织进行了研究。

66. Cylinder Body Type Casting of Steamer made by Ferritic Ductile Iron

用铁素体球铁铸造燃汽轮机缸体类铸件

67. "Optimum ductility is obtained with a ferritic matrix, so all NIBCO ductile iron is treated with a ferritizing annealing cycle."

由于最佳的韧性都是来自铁素基体,所以所有美国尼伯科球墨铸铁都经过铁素体退火韧化过程处理。

68. Electrolytic dissolving ferritic stainless steel by layers and determination of chromium and silicon in the surface and the matrix of the stainless steel

电解法逐层溶解铁素体不锈钢并测定表层和基体中铬和硅的含量

69. salt bath ferritic nitrocarburizing

盐浴铁素体氮碳共渗

70. Keywords Phase analysis;Heat-resisting high-strength ferritic steel;Precipitates identification;

相分析;铁素体耐热高强钢;析出相的测定;

71. lime ferritic electrode

碱性焊条

72. Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

碳素钢管、铁素体合金钢管及奥氏体合金钢管

73. Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

碳素钢管、铁素体合金钢管及奥氏体合金钢管规范

74. A kind of New Ferritic Stainless Steel for the Paddle Wheel of Pump Used in Phosphoric Acid Slurry

磷酸料浆泵叶轮用新型铁素体不锈钢的研制

75. C.P.Cheng, S.M.Chen, T.S.Lui and L.H.Chen, “High Temperature Tensile Deformation and Thermal Cracking of Ferritic Spheroidal Graphite Cast Iron ”, Metall.Trans.A., vol.28A,pp.1-5, 1995.

程金保、吕传盛，“肥粒铁基球墨铸铁共析变态温度附近以下之热疲劳龟裂性质探讨”国立成功大学博士论文，1988。

76. equiaxed ferritic grain

等轴铁素体晶粒

77. Ferritic steel vessels with tensile properties enhanced by heat treatment

经过热处理后提高抗拉性能的铁素体的容器

78. The peculiarity of HCSB TBM is to select the reduced activation ferritic steel (RAFS) as structural material, the high stabilizing helium as coolant, ceramic Li4SiO4 pebble as tritium breeder.

结构设计方案以低活性铁素体钢(RAFS)为结构材料，稳定性极好的隋性氦气作为冷却剂，陶瓷硅酸锂小球为氚增殖材料。

79. Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications

继电器用易切削铁素体不锈软磁合金技术规范

80. Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications

继电器用易切铁素体不锈软磁合金规范