flexure
flexure
1. 1st, lies face downward, both hands flexure holds the forehead, pointed toes.
1、俯卧，双手屈曲托头部，脚尖伸直。
2. Test method for flexure strength of impermeable graphite materials
GB/T13465.2-1992不透性石墨材料抗弯强度试验方法
3. Test method for measuring flexure strength of silicon slices
GB/T15615-1995硅片抗弯强度测试方法
4. Method for the determination of the flexure strength of graphite electrodes
GB/T3074.1-1982石墨电极抗折强度测定方法
5. Test method of ferrocement panels in flexure
GB/T3691-1983钢丝网水泥板受弯试验方法
6. The VJ series of OMD MLCCs are designed to prevent shorts or low insulation resistance due to board flexure cracks, reducing the risk of field failures and lowering warranty costs.
VJ系列OMD MLCC可防止因板弯曲龟裂导致的短路或低绝缘电阻,从而可降低现场故障风险以及保修成本。
7. Yang Zhi-gang,Li Jun,Zhang Chun-hong,et al.Analytic solution of a differential action microscopic magnifying mechanism with flexure hinges[J].Piezoelectric &Acoustooptics,2000,22(1):57-61.
[6]杨志刚,李军,张春洪,等.具有柔性铰链的差式微位移放大机构的受力分析[J].压电与声光,2000,22(1):57-61.
8. Theory Design Method of a Flexure mechanism for Parallel Micromotion Working Table
一种并联微动工作台柔性机构的理论设计方法
9. 3-D FEM Anlysis of effect of structure factor on crankshaft flexure strength
三维有限元法分析结构因素对曲轴弯曲强度的影响
10. Stiffness characteristics of two types of micro-motion flexure linear guides
两类柔性微动直线导轨的刚度特性
11. In order to simplify the presentation of the basic principles, we shall consider in this chapter two-dimensional structures subjected to flexure.
为了使这些基本原理的讲述简单明了，在本章中将研究承受弯曲作用的平面结构。
12. 2D thin board elastic flexure
二维薄板弹性挠曲
13. He looks at the hill, only see the road flexure give into that cross stele with conical. The blazing sunshine basked rock change white.
他抬头向山坡望去，只见小路盘旋而上通向那个圆锥形十字石碑，炽热的阳光将岩石晒得发白。
14. This paper aims at three typical flexure hinges, and analyzes the nonlinearity of the flexure hinges.
以三种常见的柔性铰链作为研究对象,对柔性铰链进行非线性分析。
15. To release(a bow,for example)from flexure or tension.
伸直放开弯曲或拉紧的(如，弓)
16. To release(a bow, for example) from flexure or tension.
伸直放开弯曲或拉紧的（如，弓）
17. Experimental Study on Flexure Effects of Blades with Small Turning Angles
低转折角叶片弯曲作用的实验研究
18. Clash-Berg flexure temperature
克拉什-伯格挠曲温度
19. Keywords silicon nitride ceramics;microstructure;porosity;flexure strength;
关键词氮化硅;微观结构;气孔率;弯曲强度;
20. Keywords SPLENIC FLEXURE OF COLON SYNDROM/diag;DIAGNOSTIC ERRORS;COLITIS/diag;
关键词结肠脾曲综合征/诊断;误诊;结肠炎/诊断;
21. High hardness, resistance to flexure, block and impact.
具有极高的钢性和硬度，不易弯曲及堵塞、耐冲击。
22. Based on this, the rigid flexure, including its variation with the change of the dimension of suspending, is analyzed by finite element analysis.
再分析了带脱空情况下的刚性弯沉及其随脱空几何尺寸的变化；
23. The results show that the performance of several RCE flexure hinges is much higher than that of right-circular flexure hinge.
分析计算了一组不同椭圆短半轴的复合铰链实例，结果表明直圆椭圆复合柔性铰链的性能高于直圆柔性铰链。
24. Yield strength, initial flexure and length-to-diameter ratio of corroded reinforcing bars have been taken into the consideration of the analysis of the capacity degeneration.
分析锈胀开裂的混凝土结构中局部箍筋锈断致使受压区锈蚀纵筋在未达到全截面屈服时发生非线性屈曲的规律。
25. USING GEOID TO MODEL SEAWARD LITHOSPHERIC FLEXURE OF THE RYUKYU TRENCH
利用大地水准面起伏模拟琉球海沟洋坡岩石圈的挠曲
26. Method of test for compressive strength of concrete using portions of beams broken in flexure
利用已测试挠曲强度的样品测试混凝土抗压强度的方法
27. Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
利用横梁的切片进行聚乙烯树脂混凝土抗压强度的试验方法
28. For a uniform and variable cross-section box beam, a case study is given by using the proposed method;and the results are compared with ones obtained from general flexure theory.
利用该方法对等截面和变截面箱梁进行了计算，并与一般弯曲理论结果作了比较。
29. Flexure of cut T-style steel under axial pressure and its application
剖分T型钢轴压杆件相关屈曲原理及其应用
30. Affections of shear forces act on the flexure deformation of a simple supported toothed beam
剪切变形对齿状简支梁挠度的影响
31. The torque motor received dc current signals from the electric control and applies torque to the single-piece armature and flapper which is supported on a torsion flexure.
力矩马达接收来自电气控制器的直流电信号并将力矩施于由转矩挠曲支撑的整体式电枢及挡板。?
32. Standard Test Method for Flexure Creep of Sandwich Constructions
加层结构挠曲蠕变的试验方法
33. A still more difficult distinction is that between a sharp flexure and a fault
区别尖锐的挠曲和断层更加困难。
34. superior flexure of duodenum
十二指肠上曲
35. inferior flexure of duodenum
十二指肠下曲
36. Analysis on the Output Displacement and Coupling Error of Single Parallel Four -bar Flexure Hinge Mechanism
单平行四杆柔性铰链机构的输出位移和耦合误差分析
37. Keywords monocrystal diamond tool;micro-motion table;flexure hinge;
单晶金刚石刀具;微动平台;柔性铰链;
38. single-spring flexure suspension
单簧挠曲悬挂
39. half corner-filleted flexure hinge
单边导角形柔性铰链
40. half parabolic flexure hinge
单边抛物线形柔性铰链
41. Exact Design Equation of Half Right Circular Flexure Hinge
单边直圆柔性铰链转动刚度的精确计算公式
42. the member under compression and flexure
压弯构件
43. Amplitude Distribution of Flexure Vibration on Piezoelectric Beam
压电梁弯曲振动振幅分布特性的实验研究
44. Electrode Location Efficiency and Equivalent Circuit for Flexure Vibration of Piezoelectric Beam
压电梁弯曲振动电极的位置效率和等效电路
45. double parallel four-bar flexure hinge mechanism
双平行四杆弹性铰链
46. double-axis half-ellipse flexure hinge
双轴半椭圆弹性铰链
47. Laminated composite has a new type structure which is used to improve the fracture toughness and flexure strength, so it is a good material for optimizing the mechanical properties.
叠层复合是一种新型的复合构型,它具有提高材料断裂韧性和抗弯强度的优异特性,对优化陶瓷的力学性能十分有效。
48. Application of the Laminated Board Flexure Theory in Reinforcement Concrete Board Strengthening Projects
叠层板弯曲理论在钢筋混凝土板加固中的应用
49. Flexure hinge in beam line of synchrotron radiation
同步辐射光束线中柔性铰链的研究
50. Design of flexure hinge in beam line of synchrotron radiation
同步辐射光束线中柔性铰链的设计
51. Causes and Preventing Measures of Lateral Flexure of Post-Tensioned Prestessing Girder at the Stage of Stretching
后张法预应力梁张拉时产生侧弯的原因与防治措施
52. Four Point Flexure Bond Strength
四点挠曲粘合强度测量
53. Method of making and curing soil-cement compression and flexure test specimens in the laboratory
在实验室制作和固化抗压强度和抗弯强度测试用土水泥的方法
54. The double contilever beam (DCB) test,the end notched flexure (ENF) test and the mixed mode bending (MMB) test were conducted to determine the interlaminar fracture toughness and the failure locus in mixed mode for the two composites.
在研究中进行了双悬臂梁（DCB）试验、端边切口（ENF）试验和混合模式弯曲（MMB）试验，以确定此两种复合材料的层间断裂韧性和混合模式断裂曲线。
55. Design and manufacture of a new type of planar flexure hinges micro-grabber were introduced based on the research of flexure hinges associated with an opening-closing experiment.
在研究柔性铰链的基础上,介绍了平面柔性铰链微夹持机构的设计与制作,并对此进行了张合实验。
56. On the studying course of bottle structure flexure ,gain the loads and mode through extract the systematic eigenvalue,loads and placement-laods curves by relating to the non-linearity effects.
在研究瓶体结构屈曲过程中，通过提取系统的特征值获得结构的载荷及模态。在计及非线性影响的情况下，得到载荷和位移-载荷曲线。
57. Shear stresses and shear strains in prismatic members may be caused by either torsional moments, or by shear forces associated with flexure.
在等截面杆件中，剪应力和剪应变可以由扭矩引起，或者由变曲相关的剪力引起。
58. In these cases, a standard colonoscope also could not be adanced beyond the bend at the hepatic flexure because of a redundant colon in one case and pain in the other case.
在这两例病人中，标准的结肠镜检查也不能跨过肝曲，其中一例是因为结肠冗长，另一例则是因为疼痛。
59. Discussion About Flexure Strength Calculation of Steel Section Concrete Pillar
型钢混凝土柱正截面承载力计算探讨
60. STIFFNESS ANALYSIS ON A WIDE-RANGE FLEXURE HINGE-BASED PARALLEL MANIPULATOR
基于大行程柔性铰链的并联机器人刚度分析
61. POLYSILICON THIN FILM FLEXURE HINGE FABRICATED USING SURFACE MICROMACHINING TECHNOLOGY
基于微制造的多晶硅薄膜型柔性铰链
62. The Rotational Compliance Formula of the Flexure Hinges is Ratiocinated Based on the Flexibility Curve Equation
基于挠曲线方程的柔性铰链转动柔度公式推导
63. Design and Analysis of a Micro-manipulation End-effector Based on Flexure Hinge
基于柔性铰链的微操作执行器的设计和分析
64. Recommendations for the presentation of plastics design data - Mechanical properties - Creep in flexure at low strains
塑料设计数据表示方法推荐标准。机械特性。蠕变。纸应变挠曲蠕变
65. Study of flexure resistance of glass fiber cords for reinforcing rubber products
增强橡胶用玻璃纤维帘线耐曲挠性研究
66. Long travel range flexure hinges
大行程柔性铰链
67. If your application requires flexure cycle life or desirable "stay-put" bend characteristics, then OmegaFlex Formex hose may be your problem solver.
如果你的应用要求是必需有折缝周期寿命或者是理想“保持固定”弯曲特性，奥美嘉福来克斯甲酰软管可能帮到你解决问题。
68. The stator clamps the rotor by a flexure hinge clamping structures in symmetrical directions.
定子采用柔性铰链双侧对钳方式交替对动子起到钳位作用。
69. Influences of main parameters of the vibrator as well as flexure hinges on vibrating modes and corresponding frequencies were numerically analyzed by ANSYS software.
对影响振子模态及固有频率的主要结构参数进行了有限元数值分析。
70. Simplified formulation of flexure and internal force was analyzed, the factors of affecting flexure and internal force were found, and the action of factors of affecting to the slab-column system was analyzed by changing these factor.
对简化后的挠度和内力进行分析，找出影响无梁楼盖挠度和内力的因素，并通过改变这些影响因素，分析其对挠度和内力的影响作用。
71. The flexure second-order effect of column in reinforced concrete frame is analysed.
对钢筋混凝土框架柱的纵向挠曲二阶效应做了分析。
72. The general formulation of prestress anchoring loss and the long-tern flexure deformation calculating of beams is deduced.
导出了具有一般意义的预应力锚固损失以及梁的长期挠曲变形计算公式。
73. of or relating to the sigmoid flexure in the large intestine.
属于或关于大肠内乙状结肠。
74. Finite element analysis of diaphragm flexure in atmospheric sounding interferometer
干涉式大气垂直探测仪中面弹簧的有限元分析
75. Optimizing Flexure Hinges of a Planar Full Compliant Parallel Mechanism
平面全柔性并联机构柔性铰链的优化分析
76. That the structure parameters of the right circular flexure hinges have an effect on its rotational compliance is analyzed,which offers some theory for the right circular hinges application in m...
并分析了直圆柔性铰链的结构参数对其柔度的影响,为直圆柔性铰链在压电微位移放大中的应用提供了一定的理论基础。
77. The model of the flexure hinge is introduced and the analysis of its stiffness is given.
建立了柔性较链导向机构的理论模型并进行刚度分析；
78. Barium enema study revealed extravasation of barium into the liver parenchyma from the hepatic flexure of the colon.
开刀检视显示一个硬结的肿瘤由结肠肝曲延伸进入肝。
79. EXPERIMENTAL ANALYSIS ON STEEL-CONCRETE COMPOSITE BEAMS WITH OPEN SECTION UNDER COMBINED FLEXURE AND TORSION
开口截面钢-混凝土组合梁弯扭性能的理论分析与试验研究
80. Research on a three-link six-DOF micromanipulator with flexure hinges[J].
引用该论文 王乐锋,荣伟彬,孙立宁.
