gasket

gasket

1. Description: Zhejiang Aosite Auto Pares Co.,Ltd ---- Timing belt,V-ribbed belt,raw edge belt,gasket and all kinds of auto belts.

------同步带,多楔带切割带,汽缺和稳中有降种汽车胶带.

2. Class 150: Corrugated graphite-filled steel gasket.

150磅级：石墨填充波纹钢板密封垫。

3. Class 300-600: Fully-encased spiral wound graphite-filled stainless steel gasket.

600磅级：全封闭螺旋缠绕石墨填充不锈钢密封垫。

4. The earthing wire shall be installed on one side of the cable tray, the bolts shall be at least M8 with double gasket, spring gasket and nuts.

6电缆桥架内接地线应平敷于线槽一侧，使用螺丝应不小于M8，并加双平垫、弹垫、螺母。

5. A2 type (plastic cap): plastic cap is set directly into the spring component with gasket to compose an integrated swing top cap.

A2（塑料盖）：塑料盖直接装在弹簧构件里，配上垫片组成一个完整的弹簧瓶盖。

6. A 309 SS inlay is standardly furnished in the gasket area of the body on ANSI class 2500 valves.

ANSI等级2500阀门的阀体的垫圈区域嵌入309不锈钢是一种标准配置。

7. A 309 SS inlay is standard in the gasket area of the body on ANSI class 2500 valves. For this option on other pressure classes, specify special features suffix H.

ANSI等级2500阀门的阀体的垫圈区域嵌入309不锈钢是一种标准配置。而其它压力等级只是作为一个选项，需要这种特殊配置时，请在型号后加上一个后缀“H”加以指定

8. A 309 SS inlay is standardly furnished in the gasket area of the body on ANSI class 2500 valves. For this option on other pressure classes, specify special features suffix H.

ANSI等级2500阀门的阀体的垫圈区域嵌入309不锈钢是一种标准配置。而其它压力等级只是作为一个选项，需要这种特殊配置时，请在型号后加上一个后缀“H”加以指定。

9. IP65/NEMA 4 when properly installed using the sealing gasket supplied.

IP65/NEMA 4时，正确安装使用的密封垫片供应。

10. A flat ring made of rubber or plastic, used as a gasket.

O型环一种由橡胶或塑料制成的平环，用作垫圈

11. PED Conformance Statement: Due to the unique design of the Glass Pipe Insert, this series is not considered a pressure vessel but rather a gasket.

PED认证一致性声明：鉴于玻璃管插入阀的独特设计，此系列产品不能用作压力容器，而是相当于垫圈。

12. PED Conformance Statement: Due to the unique design of the Union Insert Valve, this series is not considered a pressure vessel but rather a gasket.

PED认证一致性声明：鉴于联管插入阀的独特设计，此系列不可用作压力容器，而是用作垫圈。

13. ZHONG Ting.An elementary proof for Hausdorff measure of Sierpinski gasket[J].Natural Science Journal of Xiangtan University,2004,26(4):6-7.

[6]钟婷.一个Sierpinski垫片Hausdorff测度的初等证明[J].湘潭大学自然科学学报,2004,26(4):6-7.

14. Some items will be deleted from our order such as head gasket No A3074982 however we will take 1400 pc in AIC stock.

一些条目可能会从我们的订单中删除，例如编号为A3074982的头状垫圈，但我们会在AIC仓库提取1400件货物。

15. One hemisphere has a gasket seal;the other has a stopcock for attaching to 0.8-1.2cm inner-diameter vacuum tubing.

一半圆为封死的,一半圆有一连接直径0.8到1.2公分的抽真空橡皮管。

16. The leakage event of a non-asbestos gasket was taken place at the manhole flanged joint of a boiler after more than one-year service.

一台废热锅炉人孔用非石棉纤维橡胶垫片服役一年多后发生泄漏。

17. Adhensive Gasket:This product is made of pure aluminum foil and glue.Good sealing and good viscosity.

不干胶型垫片：本产品由纯铝箔与胶水经特殊处理而成。密封、粘贴性强。

18. Speciality manufasctukre: Hexagon Nuts Domed Cap Nuts, Nylon locking Nuts, Flange Nuts, Outet Sawtootn gasket.

专业供应六角螺帽、盖形螺帽、尼龙锁紧螺帽、法兰面螺帽、外锯齿垫圈。

19. The best gasket Taien brand!!!

专业十年，创密封第一品牌!!!

20. Test of Gasket Leakage about Mid-content Flexible Graphite and Asbestos, etc.

中碳柔性石墨与石棉橡胶板等密封垫片泄漏率的测试与比较。

21. The recommended sealing torque to ensure proper seal of this connection is 25 foot-pounds for the glass-filled Teflon gasket and 15 foot-pounds for the Teflon gasket.

为了确保接头的彻底密封，推荐的密封转矩对于玻璃填充特氟纶垫圈是25英尺-磅，对于特氟纶垫圈是15英尺-磅。

22. The preparation methods of deketoxime type one-part RTV silicone rubber sealant on spreadability and for formed inplace gasket were introduced respectively.

介绍了可涂饰性及就地成形密封垫圈用脱酮肟型单组分RTV硅橡胶密封剂的配制方法。

23. From engineering to final check, IG Gasket is able to provide the widest range of services, including an extremely fast delivery of first prototype samples.

从研发过程到最后的检测，爱吉可为您提供最为广泛的服务，其中包括在最短的时间内提供初始成品样板等。

24. Remove the bezel and rubber gasket from the motor output shaft.

从马达输出轴上拆卸玻璃框和橡皮垫圈。

25. He blew a gasket at the news(= became very angry).

他听到这消息勃然大怒。

26. Working his fingers between the top of the door frame and the rubber gasket, he yanked on it with all his strength.

他把手指伸进门边上的框和橡皮封条之间，使尽全身的力气去拉。

27. A new type of non-asbestos rubber gasket sheet was developed using highly fibrillated PAN pulp as a reinforcement and high effciency entrap component replaced of aramid pulp.

以上海兰邦公司生产的高度原纤化聚丙烯腈浆粕为增强及高效微粒捕获组分,取代石棉及芳纶浆粕,开发研制了一种新型无石棉橡胶密封板,并对其进行了系统的性能测试分析。

28. Any material deviations from standard - packing, gasket, Bolting, etc.

任何非标准的材料:填料,垫圈,螺栓,等等。

29. Mainly supplying steel even gasket, and manufacture the other kind of gasket, which price is quite low!

优惠主要供应钢制平垫圈!

30. But he had to try. Working his fingers between the top of the door frame and the rubber gasket, he yanked on it with all his strength.

但是他得想办法。他把手指伸进门边上的框和橡皮封条之间，使尽全身的力气去拉。

31. Q9: On what kind of materials can I use anaerobic adhesives (threadlockers, thread sealants, retaining compounds and gasket eliminators)?

使用加热方法可加速厌氧型粘合剂固化吗？

32. Practical using in some steel plants showed that the gasket had excellent properties in airtightness and...

使用后不粘结水口与滑板,拆卸方便;

33. Gasket rings of different materals will be used for different liquid mediums, Products can be supplied as per Customersi requirements.

使用流体介质的不同采用不同材料的橡胶圈,可根据客户需求提供产品。

34. Slower leak rates can be obtained with these connections depending on surface finishes, gasket materials, and mechanical condition.

依赖于表面光洁度、衬垫材料和机械状况，用这些接头可以获得更慢的泄露率。

35. Trim or remove excess sealant film in the rear main cap oil pan gasket groovDO NOT remove the sealant inside the rear main cap slots.

修整或清除后主盖机油底壳垫圈凹槽中过多的密封剂薄膜。切勿清除在后主盖槽中的密封剂。

36. Our Company is a professional manufacturer in producing precise screw,nut,thread,gasket,nail,hardware accessories,titanium jig of glasses,titanium gemel,ctc.

兴兴达公司是一家专业生产制造精密螺丝、螺母、丝通、垫片、钉子、精密五金配件及眼镜夹口、钛铰链为主的制造商。

37. Wide field of applications, elevated service pressures and gasket stresses, existing plants, heat transfer oils.

具有广泛的应用领域,可用于各类生产企业的高温、高压场合,以及导热油的密封。

38. Divided into dentiform gasket,flat gasket,compoundd graphite dentiform gasket.

分为齿形垫片、平垫、复合石墨型齿形垫。

39. Front panel is NEMA 4/IP65 using gasket supplied.

前面板是消防防灾4/IP65使用垫圈供应。

40. This information is furnished as a guide for selecting material. Atlantic Gasket disclaims liablility for results or use.

前面的标准，那横线后面的这些是指什么意思啊？

41. Live-loading automatically compensates for the transient loads which cause bonnet movement by maintaining a positive load on the pressure seal gasket as the pressure reduces.

动负载自动补偿波动转换中的变化,在压力减少时,阀帽会产生运动,维持压力密封垫圈上的正向负载。

42. Pressure Seal ? uncomplicated design has segmented retaining ring and mild steel silver plated gasket to aid disassembly and provide maximum bonnet seal.

压力密封?结构简单，分段扣环，镀银低碳钢垫圈，有助于拆卸和最大限度的阀帽密封。

43. Press the packing, replace the seal gasket.

压紧填料，更换密封垫。

44. The acquirement of accurate 3D measurements of the engine cylinder gasket is the key of quality control and reverse engineering.

发动机气缸垫精确三维尺寸的获得是气缸垫质量检验及其样品反向工程的关键。

45. The engine had blown a gasket,ie the gasket had suddenly let steam,etc.escape.

发动机的一个垫圈失效了(蒸气等逸出).

46. The engine had blown a gasket, ie the gasket had suddenly let steam, etc escape.

发动机的一个垫圈失效了（蒸气等逸出）.

47. The engine had blown a gasket,ie the gasket had suddenly let steam,etc escape.

发动机的一个垫圈失效了（蒸气等逸出）。

48. The engine had blown a gasket(= had allowed steam, etc. to escape).

发动机的密封圈漏气了。

49. Optional packing and gasket materials are available for a full range of service conditions.

可提供备选填料和垫圈材料，以满足各种应用环境。

50. All kinds of rubber gasket Using for servicing motorcar and large farm machines.

各种垫子,用于汽车维修及大型农机。

51. It is essential to use a new gasket each time the connection is tightened because the softened nickel washer becomes hardened after each compression.

因为在每次压缩之后软化的镍垫圈会变硬，每次接头上紧时必须使用新衬垫。

52. The circular male and female bonnet joint is self-aligning and encapsulates the gasket.

圆形外螺纹和内螺纹阀盖连接是自行对准调整并且封装的垫圈。

53. An engine cylinder head gasket leaking between a cylinder and an adjacent water jacket is indicated by coolant foaming or overheating and loss of coolant.

在一个汽缸和相邻的水套之间的引擎汽缸头套环泄漏的标志是冷却液冷却液产生泡沫或者过热，并且冷却液流失。

54. In carrying out the washing, operations such as rubberized makes the gasket paper by soaking wet.

在举行洗版、擦胶等操纵时，会使衬垫纸浸火受湿。

55. As referenced above, leakage during a lyophilization cycle can occur, and the door seal or gasket presents an avenue of entry for contaminants.

在冻干过程中有可能发生泄漏，门上的密封圈或垫圈有可能是污染物的通道。

56. When installing a pinch valve to a rubber, PVC, or any "slick" mating flange, we recommend that you install a metal serrated gasket between the two flanges to assist in the seal.

在安装夹管阀时，如果采用橡胶、PVC或任何“光滑的”配套法兰，则我们建议在两个法兰之间加装一个金属锯齿垫圈以增强密封效果。

57. The flange gasket bolts for the gate valves should be retightened during installation as the bolts may have loosened due to storage and shipping.

在安装期间，闸阀上的法兰垫圈螺栓应该重新紧固，因为在库存和运输时螺栓可能会松懈。

58. Line pressure tends to relieve gasket loads during operation.

在操作期间，管道压力倾向于释放垫圈负载。

59. Position the new gasket on the element and insert it into the water heater tank (Figure 10).

在新的加热元件上套上新的垫圈，插入热水器内胆（如图10）。

60. Position the new gasket on the element and insert it into the water heater tank (Figure 14).

在新的加热元件上套上新的垫圈，插入热水器内胆（如图14）。

61. Full enclosure to allow gasket to retain positive radial support during loading.

在负载期间，全封闭外科使得垫圈能够保持正轴向支撑。

62. The side walls of the gasket groove shall be 63 micro-inch maximum roughness.

垫圈槽的侧壁最大粗糙度为63百万分之一英寸。

63. Standard finish of gasket surface is serrated, either spiral or concentric, with125-200 RA finish.

垫圈表面的标准光洁度是锯齿面，或是螺旋形，或是同心形，光洁度为125-200ra.

64. Standard finish of gasket surface is 125-200 micro-inch maximum roughness.

垫圈表面的标准光洁度最大为125-200百万分之一英寸粗糙度。

65. Notation for calculation of gasket load.

垫圈负载计算时用到的符号。

66. The loading of the outboard gasket has the rule of first rose then descended.

垫片外侧载荷变化呈先升后降的规律。

67. The loading of the outboard gasket first rises then descends...

垫片外侧载荷呈先升后降的规律。

68. According to the gasket stress, the external bending moments and the tightness of flanged joint are related based on the tightness calculating method of PVRC.

基于PVRC紧密性的计算方法,以垫片应力为判据,关联了外弯矩与接头紧密度之间的关系。

69. Sill plates are placed over a sill gasket and attached to the concrete foundation with anchor bolts to securely fasten the wood-frame structure to the foundation.

基木板放置在基木托上,固定到混凝土基础,并且用锚栓将木框架结构牢固地与基础连接。

70. Exposed aluminum foil tape sealing gasket needed.

外露的垫片需用铝箔胶带密封。

71. All purpose goggle. Anti-fog shatterproof polycarbonate lenses with metallic coating. UV protection. Adjustable TPR split head strap. Integrated TPR soft frame and gasket.

多功能游泳泳镜，聚碳酸酯纤维与金属涂层，防紫外线.泳镜带可调松紧.垫圈很软，佩戴舒适！

72. If you do not have a gasket, contact your supplier for a replacement.

如果你没有垫圈，同你的供应商联系，要求一个替代品。

73. As the gasket extrudes from the body, it may push the rubber flange away slightly from the cast body.

如果垫圈从阀体内挤出，则可能会将橡胶法兰从铸造阀体上轻微推出。

74. If there's a creamy consistency, similar to mayonnaise, then that engine basically has a blown head gasket and is no good.

如果是油脂样的，就像蛋黄酱，那发动机的盖垫密片已经坏了。

75. Easily installed, with gasket, between standard class 125 flanges.

安装容易，带垫圈，位于标准125磅级法兰之间。

76. Install the new element and gasket, checking for correct positioning. Reconnect the electrical terminals and tighten the retaining bolt.

安装新的加热棒和垫圈,确认是否位置是否正确。重新连接电气端子,旋紧固定螺栓。

77. Install replacement gasket and thermostat housing.

安装替换垫圈及调温器外壳。

78. Installation Note: The flange gasket bolts for the gate valves should be retightened during installation as the bolts may have loosened due to storage and shipping.

安装注意事项:在安装期间,闸阀上的法兰垫圈螺栓应该重新紧固,因为在库存和运输期间螺栓可能松动。

79. INSTALLATION NOTE : The flange gasket bolts for the gate valves should be retightened during installation as the bolts may have loosened due to storage and shipping.

安装注意事项:在安装期间，闸阀上的法兰垫圈螺栓应该重新紧固，因为在库存和运输期间螺栓可能松动。

80. Sealing gasket sealed packaging for a variety of containers provide a reserve force, so that products can be more time to perfect the preservation of its quality.

密封包装封口垫片则为各种材料的容器提供了一个后备力量，使产品能够更长时间地保存了其完美的质量。