involute
involute
1. The Application of CAM to Involute Gear of the Die
CAM在模具渐开线齿轮中的应用
2. TI worm gearing, namely toroidal involute worm gearing, consists of involutehelical gear and hourglass worm enveloped by the gear.
TI 蜗杆传动,全称渐开面包络环面蜗杆传动,由渐开线斜齿圆柱齿轮及其包络的环面蜗杆组成。
3. TI worm drive is a novel kind of hourglass worm, which consists of involute helical gear and enveloping hourglass worm.
TI蜗杆由渐开线斜齿轮包络形成,与斜齿轮组成一种环面蜗杆传动。
4. ZSC series involute gear reducer;
ZSC系列渐开线齿轮减速机；
5. Right Meshing Condition for a Pair of Involute Gear
一对渐开线齿轮正确啮合的条件
6. A New Method of Turning Involute Helicoid Worm
一种车削渐开线圆柱蜗杆的新方法
7. The moves in chess are not only manifold, but involute.
下棋的走法不但多种多样, 而且错综复杂。
8. Replacement of Involute Spline with Different Parameters
不同参数的渐开线花键间的替代
9. Strictly speaking,theworm surface of the hob must be an involute helicoid which possesses an intersectingcurve in axial plane convex.
严格地说,渐开线齿轮滚刀的基本蜗杆曲面应是渐开线螺旋面,其轴断面内的截线是一条中凸的曲线。
10. Through enlarging the top fillet arcs radii and meanwhile reducing the addenda of the tools, an improvement on basic profiles of rack kind tools is proposed to improve the tooth bending strength of the external involute cylindrical gears.
为提高外啮合渐开线圆柱齿轮的齿根弯曲强度 ,针对齿条型刀具提出了减小刀具齿顶高并同时加大其齿顶过渡圆弧半径的改进方案。
11. By use of rectilinear characteristic of involute cutter and according to clock and watch gear drive demands, this paper have put forward involute toothing with double pressure angles.
为此，作者利用渐开线刀具的齿廓为直线，刃口成形容易的特点，根据钟表齿轮的传动要求，提出了一种双压力角渐开线齿形。
12. This paper introduces a method of transforming C620 universal lathe into copying lathe to turn the involute contour of automobile brake cam.
介绍了一种把C620普通车床改造成仿形车床,车削汽车制动凸轮的渐开线轮廓的方法。
13. Introduced the way of the three-dimension sculpt tehnology of involute worm based on Auto CAD 2004 and Pro/E.
介绍了在Auto CAD环境下和Pro/E中渐开线蜗杆的三维造型方法。
14. A method of measuring contrate involute errors of double gears, gear shapers and gear shavers on the CZ450 gear integrated error tester using the polar coordinate method is introduced.
介绍了在CZ450齿轮整体误差测量仪上利用极坐标法测量双联齿轮、插齿刀和剃齿刀的端面渐开线齿形的方法,从而扩展了CZ450的测量功能。
15. This paper introduces calculation and measurement of BRITISH Standard Involute splines.
介绍了平齿根齿侧配合英制渐开线花键计算、测量的基本公式及方法。
16. Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器进料体模具的设计,实践证明,此模具结构合理,脱模方便,有一定的经济价值。
17. Two calculating methods of straight line and Archimedes spiral approximating involute are introduced.
介绍了用直线及阿基米德螺旋线逼近渐开线的两种方法。
18. This paper introduced the calculation of the maximum undercut and the involute length of gear after cutting with gear cutter hob.
介绍了磨前滚刀滚切齿轮的最大根切量和磨后的渐开线长度计算,并建立了数学模型。
19. This paper advanced a practical and succinct formula for tooth number choice of involute gear.
从等强度概念出发,推出一个据以选取渐开线齿轮齿数的简单、实用公式。
20. The article starts from the features of the tapered involute spline analyses the characters of hob design, expounds the main steps in the tapered involute spline hob design.
从锥底渐开线花键的特征着手,分析了滚刀设计的特点,给出了锥底渐开线花键滚刀设计的主要步骤。
21. The axial profile of an odometer driving gear(in form it's equal to an involute helicoid worm) in a certain model motorcycle is carefully analysed.
仔细分析了某型摩托车里程表主动齿轮(形式上相当于一个渐开线圆柱蜗杆)的轴向齿形。
22. Involute splines come in several varieties: Flat root side fit, fillet root side fit, and major diameter fit.
以下是对渐开线花键配合方式的3种定义,供参考.
23. With the involute spline on the adjustment pole of the Liebao Mitsubishi auto chair as an example,the cold extruding process for forming the involute splines was stated.
以猎豹三菱汽车座椅调节杆上的渐开线花键为研制对象,阐述了渐开线花键的冷挤压成形工艺,冷挤压模制造工艺采用线切割成形。
24. According to lead form principle of cylindrical gear with involute helicoids,it is analyzed of several theoretical methods on lead modification of involute helicoids gears by using CNC form grinding .
依据渐开螺旋面圆柱齿轮齿向成形原理，分析数控成形磨削渐开螺旋面齿轮齿向修形的各种理论方法。
25. In accordance with the characters of end section involute of helicoids,it is analyzed of change of the base circle affecting the pressure angle of involute profile.
依据渐开螺旋面端面渐开线的性质，分析了渐开线基圆变化对渐开线齿形压力角影响。
26. Curled inward; coiled or involute.
内卷的向内卷的；盘绕的或内卷的
27. Involute Spline is one having teeth with involute profiles.
内花键：在圆柱体的孔的内表面形成的花键。
28. Design Theory and Experimental Amends of Involute Spline Roller
冷滚轧滚轮设计理论及实验修正
29. The effect of the corner radius on root stress of involute gear
刀尖圆弧半径对渐开线齿轮齿根应力的影响
30. With the multi-grid method,the influences of surface roughness on the non-Newtonian thermal elastohydrodynamic lubrication of involute spur gear were investigated.
利用多重网格技术,研究了表面粗糙度对渐开线直齿圆柱齿轮非牛顿热弹流润滑的影响。
31. A new spline curve is presented which interpolates given points and tangent directions with piecewise involute of circle.
利用拼接的圆渐开线实现对平面上的数据点及其切向的插值。
32. The characteristics and helical angle of the double circular arc gear are very different from those of the involute gear.
双圆弧齿轮传动的啮合特性和螺旋角的设计与渐开线齿轮传动有质的区别。
33. Double involute gear is a kind of new typed involute gear.
双渐开线齿轮是一种新型渐开线齿轮。
34. The Mode and Vibration Response of the Double Involute Gear
双渐开线齿轮的模态与振动响应
35. the contrary to involute function
反渐开线函数
36. Leaves linear-lanceolate, 10 cm long, 1-3mm wide, margine involute.
叶片线状披针形，长达10厘米，宽1-3毫米，边缘常内卷。
37. The feasibility of the CWR forming of involute gear-shaft is analyzed and the hypothesis of the kinematically admissible velocity field in the wedging zone is verified.
同时对渐开线齿轮轴楔横轧成形的可行性进行了分析，对成形区的动可容速度场假设进行了验证。
38. Synchro-mechanism is the important part of a CRF(Cold Roll Forming) machine, whose synchronized accuracy will affect the pitch cumulative errors of involute spline directly.
同步机构是精密冷滚轧机床的重要组成部件,其同步精度直接影响到花键成形的周节累积误差。
39. Lower sepal broadly funnelform, gradually narrowed into an incurved or involute spur ca. 1.5 cm.
唇瓣宽漏斗状，逐渐缩小成一弯曲的或内卷距，约1.5厘米。
40. Lower sepal funnelform, abruptly elongated into an involute, long spur.
唇瓣漏斗状，突然拉长成一内卷，长距。
41. Lower sepal narrowly funnelform, narrowed into an involute, short spur.
唇瓣狭漏斗状，缩小成一内卷的，短距。
42. Lower sepal navicular, ca. 6 mm deep, narrowed into an incurved or involute spur ca. 1.5 cm, tip rounded, mucronulate.
唇瓣舟形，约6毫米深，约缩小成一弯曲的或内卷距长约1.5厘米，端部圆形，具小短尖的。
43. Optimized Design of Arc Involute Stair Horse
圆弧渐开梯段优化设计
44. Special worm gear hobs with circular tooth ,double pitch and involute etc, can also be ordered .
圆弧齿、双螺距、渐开线等特殊蜗轮滚刀也可以订货。
45. Gauges for straight cylindrical involute splines
圆柱直齿渐开线花键量规
46. second involute of the circle
圆的第二渐伸线
47. Based on the arc substituting involute, the paper introduces a method for calculating the height and number of prisms in worm gear surface as well as the factors effecting them.
在以圆弧代替渐开线的基础上,导出了蜗轮齿侧棱面高度及数目的计算方法及影响他们的因素。
48. A digital integration interpolating principle is built on the basis of analysis made on circular involute forming principle.
在分析圆的渐开线形成原理的基础上，建立了数字积分法渐开线插补原理。
49. A polar radius interpolating principle is built on the basis of analysis made on circular involute forming principle.
在分析圆的渐开线形成原理的基础上，建立了极径渐开线插补原理。
50. The involute pinion cutter grinding experiment made in the laboratory and the measuring results prove that the former calculate result is valid .
在实验室进行的渐开线插齿刀磨齿实验的测量结果证实了上述计算结果的正确性。
51. Based on the surface equation of the helical involute pinion, the equation of the face gear was deduced by the theory of gearing and the conditions of nonundercutting and nonpointing were studied.
在形成斜齿圆柱齿轮齿面方程的基础上,采用啮合原理推导了面齿轮的齿面方程,讨论了面齿轮根切和齿顶变尖的条件。
52. The traditional method to measure the curves in exiting railway is the method of deflection angle,while the method to calculate the curvatures and the deflection distance is the involute method.
在测量既有铁路曲线时,传统的测量方式是偏角法,计算曲率和拨距的方法是渐伸线法。
53. Exactitude Modeling of Involute Gear on Pro/E
基于pro/E的渐开线齿轮精确建模
54. The Method to Produce Involute Gear Based on UG
基于UG平台的渐开线齿轮生成方法
55. It would be timeworn if I only use Chinese element and it would be involute if I only use Europe element.
完全使用中国的元素会很古板，完全使用欧式的元素会很繁复。
56. It was difficult that the 3D modeling to involute worm before.
对于渐开线蜗杆的三维建模在以前来说是比较困难的。
57. Compared with a standard involute gear, the unsymmetric involute gear could efficiently improve the tooth root bending strength by finite element analysis.
对实例的有限元分析表明非对称渐开线齿轮的齿根弯曲强度比对称齿轮有较大提高。
58. Comparing with involute gear pump, the instant displacement is in direct proportion to the angular velocity of the gear and stable without pulsation.
对比渐开线齿轮泵，单圆弧齿轮泵的瞬时排量与齿轮角速度成正比，且稳定，无脉动。
59. The paper theoretically analyzes the non-chain drawing mechanism with involute cycloidal compound tooth in a coal machine and researches the photoelastic test.
对采煤机渐开线、摆线复合齿轮-销轨无链牵引机构作了理论分析及光弹性试验研究。
60. Basic rack tooth profile of fine-pitch involute cylindrical gears
小模数渐开线圆柱齿轮基本齿廓
61. Advocate white is vogue, people need is involute medium halcyon.
崇尚白色是时尚，人们需要纷乱中的宁静。
62. Advocate white is vogue, people need is involute medium halcyon. The beauty that with simple look concolorous of cloth art sofa mixes oily sofa to give a person is dinkum.
崇尚白色是时尚，人们需要纷乱中的宁静。与纯色布艺沙发同色的混油沙发给人的美是纯粹的。
63. Square; involute; multiply a number by itself
平方,将某个量或符号提升二次幂的行为或过程
64. The involute progression of hallucination is strange.
幻觉的复杂的发展过程很奇特。
65. Denote the center of Curvature at by.When the point moves along the plane curve, the trace curve of the point is called the evolute of the curve, denoted by, and is called the involute of the curve.
当点沿曲线移动时，相应的曲率中心的轨迹曲线称为曲线的渐屈线，而曲线称为曲线的渐伸线。
66. The pattern in which lesions involute may be useful in diagnosis, the typical keratotic papule of pityriasis lichenoides varioliformis acuta for example.
当皮疹呈系列发生时，则表现为多形性，如水痘和疱疹样皮炎，而且不同进展和退行阶段的损害都同时存在。
67. Fitting of Involute Gear Shape
拟合渐开线齿
68. Provides an examination method of numerical control about the fallibility of the involute gear.
提供了一种渐开线齿轮误差数控检测方法,给出了控制电路及算法,有效地提高了检测精度。
69. A new method employing rigid cylinder-shaped stylus for measuring the errors of involute tooth profiles of gears is presented. Its principle and measuring results are introduced.
提出一种采用刚性圆柱棒形测头测量渐开线齿形误差的新方法，介绍了测量原理及测量结果。
70. This paper presents a new method for calculating node coordinates when using arc approaching involute .
提出了一个圆弧逼近渐开线节点计算的新方法。
71. In this paper, the concept and the principle of virtual modification( mothed are intraduced, The calculation) formula of normal backlash for internal involute gear driving presented.
提出了在内啮合渐开线齿轮法隙计算中的虚拟变位概念,阐述了虚拟变位的基本原理。并通过虚拟变位的方法,推导出了内啮合渐开线齿轮传动法向齿侧间隙的计算公式。
72. Abstract It is studied in this thesis of a method on axial shape calculation of form grinding wheels when form grinding is used for machining cylindrical gears with involute helicoids.
摘要 本文探讨了成形磨削渐开螺旋面圆柱齿轮成形砂轮轴向截形计算方法。
73. The real-time meshing stiffness of arced planet gear and the meshing stiffness of involute planet gear have mainly been analyzed.
摘要主要分析了圆弧行星齿轮的时变啮合刚度和渐开线行星齿轮的啮合刚度。
74. The article starts from the features of the tapered involute spline analyses the characters of hob design, expounds the main steps in the tapered involute spline bob design.
摘要从锥底渐开线花键的特征着手，分析了滚刀设计的特点，给出了锥底渐开线花键滚刀设计的主要步骤。
75. When the center distance of two involute gears is fixed, the plane higher pair composed by them will introduce one restriction to the mechanism.
摘要当参与啮合的两个渐开线齿轮之间有固定的中心距时，其构成的平面高副引入一个约束；
76. According to the characteristics of large gears and the line group feature of involute spiral surface, the measuring principle of straight generatrix error is stated.
摘要根据大齿轮的特点及渐开线螺旋面的线族特徵，提出基于直母线误差的测量原理。
77. Based on the method of least squarest the datasheets and charts which were used in designing involute worm gearing were formulated, then designed the predigested computer aided design program.
摘要运用最小二乘法对渐开线蜗杆传动设计计算的有关数表和线图进行了公式化处理，进而研制了这种传动的简化计算机辅助设计程序。
78. It is proved that the involute profile may be adapted in four-tooth difference harmonic drive by the numerical method, this provided the theoretical foundation for practical engineering.
数值方法证明四齿差谐波齿轮传动可以使用渐开线齿廓，这为实际生产提供了理论依据。
79. Abstract: In this paper,the biting condition of cold rolling process for involute spline manufacture is built up.The condition provides guarantee for the success of the process,and provides basis for tool design and tryout.
文摘:针对渐开线花键冷搓成形工艺建立了咬入条件，从而为冷搓工艺的顺利进行提供了保障，也为冷搓模具的设计与调试提供了依据。
80. Involute Interpolation of Time-Sharing Method
时间分割法的渐开线插补
