lathe

lathe

1. The S1-217 crankpin lathe of crankshaft is one of the important equipment.

2 17曲轴连杆颈车床是车削曲轴连杆颈主要设备之一。

2. Weight of the lathe with 3m b. C.

3米机型重量。

3. NDC shop floor control, the main function is to achieve NC program transmission and lathe management.

NDC车间控制，主要功能是实现数控程序的传输和车床的管理。

4. The universal lathe is most widelyused and plays an important part in industry.

万能车床得到了最广泛的使用,所以在工业上起着重要的作用。

5. Process of cutting designs onto a gravure printing cylinder mechanically with a lathe and special cutting tools.

中义以车床或特殊工具将设计图案刻在凹版印刷辊筒上的工作。

6. Lathe bed is usually made of gray or nodular cast iron to damp vibrations and is made by casting.

为了衰减振动，车床床身通常是由灰铸铁或者球墨铸铁经铸造而制成。

7. To avoid this, the underfloor wheel lathe or "ground" wheel lathe was developed like the one shown in the photo below.

为了避免架车，设计了地下式或地面式车轮机床，见下图。

8. The paper analyese reason of ordinary lathe faults in operation and gives out the elimination methods.

主要介绍了普通车床在运转过程中出现的故障、原因及排除办法。

9. Mainly Renmo milling cutter, reamer, pulling knives, plate-shaped lathe tool, knife inserted teeth and bore drilling.

主要用于刃磨铣刀、铰刀、拉刀、盘形车刀、插齿刀及扩孔钻等。

10. Main equipments such as: large-scale vertical lathe, borer, butterfly valve testboard etc.

主要设备有：大型立车?镗床?蝶阀测试台等。

11. Knowledge of milling &lathe machine.

了解磨具和车床设备。

12. Metal major equipment: Lathe, meters bed cars, punch, drilling, milling machine, special equipment.

五金主要设备:车床，仪表床车,冲床，钻床，铣床，专用设备等。

13. Designed a kind of lathe clamp that can adjust eccentricity.

介绍一种能对偏心距进行调整的车夹具。

14. This paper introduces three methods of NC practice to training students in NC lathe operation.

介绍了三种数控实习方法,训练学生对数控车床的操作.

15. The method refitting the common lathe into broacher is introduced.

介绍了将普通车床改装为拉床的方法。

16. The feeding speed must be changed with continuousness and a rule,which can let the lathe work well.

从中可知,旋切过程中刀刃进给速度必须按一定规律变化才能保证旋切机正常工作。

17. He seems a lathe turner.

他似乎是个旋工。

18. He ordered the piece taken off the lathe.

他吩咐把工件从车床上拿下来。

19. He turned the wood on a lathe .

他在车床上车削了那块木料。

20. He turned the wood on a lathe.

他在车床上车木头。

21. He ordered the piston taken off the lathe and fitted to the cylinder.

他让把活塞从车床上卸下来装到汽缸上去。

22. He adjusted the lathe and readied the cutting tool.

他调好车床，把刀具准备好。

23. Do you know how to use a lathe?

你会使用车床吗?

24. Do you know how to work a lathe?

你会开车床吗?

25. Do you know how to operate a lathe?

你会操作车床吗?

26. Use transparent thin fabrics or lath blinds, furniture or off in the metal objects, add Flash material.

使用透明薄织物或板条百叶窗，在家具或衬托物上增添闪光的金属材料。

27. It is possible to cut all thread forms and sizes on a lathe.

例11：可以在车床上车削各种形状和尺寸的螺纹。

28. To rework parts in the lathe or mill, following the guidelines given by the engineer.

依据工程师的指导修改零件。

29. A machine, such as a lathe, used to cut and shape machine parts or other objects.

刀具机床用来切割机器零件或其他物体或给零件或其他物体定形的工具，例如车床

30. Hydraulic Station Tank reservoir100 Liters with extra fan cooler. Motor2 KW. Update your Old Lathe,8 Valves entry distributor G6.

分离式液压中心控制系统,自带散热器,储油罐容量为100公斤.马达2千瓦.可以此系统对你的原有老机器升级,做到多管道油.

31. An old long lathe is changed to LJ8510/CGL type keyway broaching machine.

利用旧车床改装成LJ8510/CGL型键槽拉床,符合绿色制造减小回收成本的要求。

32. A flexible finite element stiffness model of lathe bed is presented and analysed.

利用有限元法分析床身变形,校验了机床刚度。

33. This series machine is single column vertical lathe, it has a railhead and a sidehead.

商品简介： 本系列单柱立式车床，有一个立刀架和一个侧刀架。

34. On CNC lathe and automatic lathe , use the power chuck to realize the clamping automatically of the work piece .

在CNC车床和自动车床上,使用液压动力卡盘来实现工件的自动夹紧。

35. The results show that the structure of steel consists of lath martenite and lower bainite.

在一个奥氏体晶粒内一般存在四个板条领域，裂纹尖端的塑性区内存在主位错带。

36. It is very important that determine arbor size when planning process of boring on lathe.

在制定车床上镗孔的工艺规程时，镗刀杆尺寸的确定十分重要。

37. Seat ring is progressively crimped on a lathe to imprison the O-ring in it.

在机床上,阀座密封环逐渐起波纹,并将O形环束缚在里面。

38. With the help of the veteran workers they designed a new lathe to replace hand labour.

在老工人的帮助下，他们设计了一台新车床，代替手工操作。

39. In axes speediness clamp machine of lathe,It achieves linkage function of long remove mation and short remove lockup.

在车床轴向快速夹紧机构中,实现长距离的快速移动短距离锁紧的联动功能。

40. In the past, this job was often done with hand tools or with a seam lathe.

在过去，这种工作通常是通过手工完成或者使用接缝车床完成。

41. Most modern depots are equipped with a wheel profiling facility known as a wheel lathe.

大部分现代化的车辆段都装备有车轮整形设备，例如车轮车床。

42. A nonmoving part of a machine or power tool that supports a revolving part, such as the spindle of a lathe.

头座机器或动力工具上用于安装旋转部件的不能移动的部分，如车床的转轴

43. A cone - shaped sleeve used for holding circular or rodlike pieces in a lathe or other machine.

套爪用以固着车床及其它机器中圆形或棒状物件的锥形套筒

44. Olivia runs a lathe which cuts semifinished product of metal by inches.

奥利维亚开动一台车床，车床一点一点地切削着金属毛坯。

45. Gradually she learned to operate a lathe.

她慢慢学会了开车床。

46. In case of malfunctioning of a lathe, stop the lathe immediately and tell teachers in time.

如发现机床有故障，应立即停车，并及时报告实习指导教师。

47. If longer satisfied with the picture, they can design their own work, make a bed of a lath frames.

如果配不着满意的画框时，可自己动手设计，用板条做一个称心如意的画框。

48. NINGBO HUASHENG CNC LATHE CO., LTD.

宁波华升数控车床有限公司。

49. The thrust ball bearings are used in lathe centers, automobile clutches, reducers and so on.

它们主要适用于车床顶心、汽车离合器、减速机等。

50. They're too big. We'll have to run them on the lathe a bit.

它们太大，得在车床上稍稍车一下。

51. Turns on lathe ball regarding this kind of side very too to adapt, then this aspect also needs to relate much.

对于这种侧旋球自己好不太适应，接下来这方面还需要多加联系。”

52. Experiments of diamond turning of stainless steel are taken on a fine lathe by utilizing ultrasonic vibration.

对刀具的振动频率和振幅的影响进行了理论分析。

53. We redesign board of lathe bed and do order optimization.

对床身的肋板结构重新设计,并进行拓扑优化。

54. The cause of view angle corrugation produced in precision turning on universal lathe is analyzed.

对普通车床精车外圆表面出现“视角波纹“的原因进行了分析。

55. The little boy was as thin as a lath .

小男孩瘦得就像根板条。

56. The little boy was as thin as a lath.

小男孩骨瘦如柴。

57. Beech turns easily in the lathe.

山毛榉在车床上很容易车制。

58. The workpiece is already on the lathe.

工件已经上了车床。

59. Bed width in general lathe, has a high rigidity, as in the type of rail surface hardening, wear-resistant durable.

床身宽于一般车床，具有较高的刚度，导轨面经中类淬火，经久耐磨。

60. These lath martensie first nucleates in parent austenite intergranular and twin boundary.

应变诱发马氏体首先在原奥氏体晶界和孪晶界形核。

61. To build this really requires a lathe, bandsaw, drill press...etc.

建立这确实需要一个车床，带锯，钻床等...

62. The color-sprayed lath ceiling became quickly the second main stream of Metal ceiling products.

彩色喷涂条型天花迅速成为第二代主流金属天花产品。

63. The henpecked Mr Wilson was as thin as a lath.

怕老婆的威尔逊先生骨瘦如柴。

64. QQ flies lathe the sacred angel and degenerates the angel price?

您的位置：凡人谷知道>游戏>QQ飞车神圣天使与堕落天使的价钱？

65. Our factory has lathe drill grinder rocker punch, bending machine electric welding machine and other equipment shears.

我厂有车床摇臂钻磨床冲床，折弯机剪板机电焊机等设备。

66. I pressed the button and the lathe began to turn.

我按了一下电纽，车床就开始转动起来。

67. I have a customer looking for an Armature Lathe with Undercutter.

我有个客户正在寻找一种带挖掘铲的电枢车床，那是一种小七号的车床，可以用来制造公交车、卡车、汽车和小马达电枢的车削。

68. I am a person of lathe work, a lot of people do not understand , what is the lathe work ?

我的职业是一名车工，许多人不理解，什么是车工?

69. The lath like carbide free ferrite and retained austenite has been observed by transmission electron microscope.

所得到的贝氏体形貌为无碳化物贝氏体铁素体与残余奥氏体平行排列的板条状结构；

70. Get lathe No.9 set to turn the new piston.

把九号车床调好来车这个新活塞。

71. The thrust ball bearings are used in lathe centers,automoblie cluthes,reducers and so on .

推力球轴承在工作中必须加以轴向予紧。它们主要适用于车床顶心、汽车离合器、减速机等。

72. Irregular parts fixture design for CNC lathe machining.

摘要介绍一种不规则零件的夹具设计。

73. To change the shape of(a structure,such as a wall)by applying lath and plaster or boarding.

改变形状用板条，灰泥或大木板来改变(建筑物，如墙)的形状

74. To change the shape of(a structure, such as a wall) by applying lath and plaster or boarding.

改变形状用板条，灰泥或大木板来改变（建筑物，如墙）的形状

75. To change the shape of(a structure,such as a wall) by applying lath and plaster or boarding.

改变形状用板条，灰泥或大木板来改变（建筑物，如墙）的形状。

76. To change the shape of (a structure, such as a wall) by applying lath and plaster or boarding.

改变形状：用板条，灰泥或大木板来改变（建筑物，如墙）的形状

77. The CNC lathe is a machine tool that can remove material from work-piece which is clamped and rotated about an axis.

数控车床是一种能将工件毛坯上多余材料切除掉的机床毛坯将安装在主轴上并绕主轴旋转。

78. WUXI FANGTAI EXPANDED METAL LATH CO., LTD.

无锡市方泰钢板网有限公司。

79. The result indicates that there was a great deal of lath martensite in the quenched structure.

显微组织中存在大量板条马氏体，组织亚结构中存在大量位错和孪晶。

80. An engine lathe consists of a number of parts.

普通车床由若干部件组成。