mandril
mandril
1. (4) the guide roller is mandril loosting, rotafiong and parallelism will be prohibited, mandril or bearing wear.
(4)导纸辊芯轴紧动、程量量和交错量禁绝、芯轴或轴承磨损。
2. Microscopic Features of APC-2/AS4 Tapes Wound with a Heated Mandrel
APC-2/AS4预浸料带热芯缠绕的显微特征
3. 120 deg flush head break mandrel closed end blind rivets
GB/T12616-1990封闭型沉头抽芯铆钉
4. 120 deg flush head break mandrel blind rivets
GB/T12617-1990开口型沉头抽芯铆钉
5. Discussion on the retained speeding of mandrel of MPM
MPM连轧机芯棒限动速度制度的探讨
6. An O-ring provides a simple means of retaining the bearing on the mandrel.
O型圈提供在芯棒上保持轴承的简单方法。
7. The achievement of PQF-Technology marks development and perfection of the MPM Technology, and it has also placed a full-stop to the course of the mandrel tube rolling technology in recent 100 years.
PQF轧管工艺的成就标志着MPM轧管工艺的发展完善,也为长芯棒连轧管工艺近百年的历程画上了句号。
8. X35CrMo5 cold extrusion mandrel
X35CrMo5冲挤芯棒
9. Analysis of Path Points of Roving from Feed Eye on the Mandrel
丝嘴上纱线落点轨迹分析
10. To produce specialty tubing, this procedure uses a drawbench to pull tubing through a die and over a mandrel, allowing excellent control of the inside diameter and wall thickness.
为了制造出更精密的管子,本工艺通过拔管机使管子经过钢型和心轴的拉制,这样管子的内径和壁厚精密度就能控制的很好。
11. To produce specialty tubing, this procedure uses a drawbench to pull tubing through a die and oer a mandrel, allowing excellent control of the inside diameter and wall thickness.
为了制造出更精密的管子,本工艺通过拔管机使管子经过钢型和心轴的拉制，这样管子的内径和壁厚精密度就能控制的很好。
12. Design Principle and Application of the Inter-correct Taper Mandrel
互矫型锥度芯轴的设计原理及应用
13. The features of LONZA graphite lubricant, the mandrel lubricating process as well as the friction lubricating technique for MPM rolling are described.
介绍了LONZA石墨润滑剂的特性、芯棒润滑工艺和MPM轧制的摩擦润滑技术。
14. The paper involves the new process employing pull mandrel for pipe-elongating with the twohigh rotary elongator.
介绍了在二辊斜轧延伸中采用拉力芯棒轧制的新工艺。
15. Given here is the working principle of the hydraulic screwdown control system for end-tapering when rolling with mandrel mill so as to eliminate pipe end-thickening/thining in the course of sizing.
介绍了在连轧管机中将管端轧成锥形,用以消除张减时的管端增厚及管端减薄的液压压下控制系统的工作原理。
16. This article presents the shape change of the cold tube bending,and the method of making tubes with ideal minor radius by choosing the mandrel and mastering right methods.
介绍了管子在冷态弯制时的变形情况，以及通过合理选择芯棒及掌握其正确的使用方法，达到弯制出理想小半径管件的方法。
17. Application of Positioning Controller to Semi-Floating Mandrel Mill Set
位置控制器在半浮芯棒连轧管机组中的应用
18. The Application of the Positioning Controller in the Retracted Mandrel System
位置控制器在顶杆回退系统中的应用
19. Analysis for Working Course of Eccentric Mandril Metering Device
偏心顶杆排种器的工作过程分析
20. Full-floating mandrel mill plant
全浮动芯棒连轧管机组
21. Measurement of and Study on Rolling Forces of Full-floating Mandrel Mill
全浮动芯棒连轧管机组轧制力测试与研究
22. Keywords taking out force;calculation;oblique leader;side taking out mandril;
关键词抽拔力;计算;斜导柱;抽芯;
23. inner sheath and front mandrel assembly
内套及前轴组件
24. Keywords inner spiral fin moving mandrel;spinning;performance;
内螺旋翅片游动芯头;旋压;性能;
25. Strain analysis on mandrel and connection bolts for the tension coiler of skin pass mill in cold rolling mill
冷轧平整机组张力卷取机卷筒及连接螺栓应变分析
26. Mandrel for tube cold-rolling
冷轧芯棒
27. Stress and its Effect on Service Life of Mandrel for Cold Ring Rolling
冷辗扩芯辊受力及对其寿命影响分析
28. The main parameters of open-die cold extrusion without mandrel of thick-wall tube are analyzed.
分析了厚壁管件无芯棒开式冷挤压的主要参数；
29. Several elastic claws are set on the bottom junction,a stage is set on the bottom the mandrel and the stage is sustained on the elastic claws.
分析了定位偏心轴的形状特点,针对冷、温挤压各自的特点,采用两者相结合的成形工艺方案。
30. The reasons for axial movement of roll mandrel in high speed wire rod mill and measures for eliminating them were researched.
分析了高速线材轧机轧辊轴轴向窜动产生的原因及消除轧辊轴轴向窜动措施,提出了高速线材轧机轧辊轴恒压紧固法创新设计。
31. Skiving machine includes motor,reducer,electrical box,frame,cage,edge rod support,edge rod,mandrels,mandrel box and pedal.
剥胶机主要由电机、减速器、电气控制柜、机架、机罩、刀杆架、刀杆、剥内胶和外胶的芯棒组、芯棒柜和脚踏开关组成。
32. Technology and Deformation Characteristics of Semi-floating Mandrel Mill
半浮动芯棒连轧管机工艺及变形特点
33. Semi-floating mandrel pipe mill
半浮动芯棒连轧管机组
34. Investigation of Causes Responsible for Wall Thickness Tolerance of Shell as Hot-rolled with Semi-floating Mandrel Mill
半浮动芯棒连轧荒管壁厚不均的原因分析
35. DC Drive System of Retainer of Semi-floating Mandrel Mill
半浮连轧管机组限动链传动控制系统
36. The winder will consist of an air expanded winding mandrel.
卷取机由气动胀缩卷筒组成。
37. Method of deciding mandril diameter and forming gap for coiled-type of JCOE steel pipe
卷曲式JCOE钢管成形芯轴直径和开口量的计算方法
38. The winding mandrel will be overhung type, mounted in two standard bearings.
卷筒是悬垂式的,安装在两个标准轴承内。
39. Keywords pressing mould;curved pin;side taking out;replacement;mandril;
压制模具;弯销;侧抽芯;复位;顶出杆;
40. Analysis of plastic deformation for thick-walled tube open-die cold extrusion without mandrel
厚壁管件无芯棒开式冷挤压塑性变形的分析
41. Research on experiment of size prediction of thick-walled tube without mandrel by open-die cold extrusion
厚壁管件无芯棒开式冷挤压尺寸预测的实验研究
42. dual-slot mandrel type coiler
双钳口筒式卷取机
43. Making and application of adjustable mandril of bed leg
可调式内芯床腿的制作与应用
44. 328、 Pick up test mandril and place in BOP stack.
吊起试压防喷器芯子并装入防喷器组。
45. Research on the Pressure Sensitivity of the Interferometric Fiber-Optic Hydrophone with a Concentric Mandrel
同轴干涉型光纤水听器声压灵敏度特性分析
46. BOREHOLE CORRECTION FOR ARRAY INDUCTION LOGGING TOOL WITH METAL MANDREL
含金属心棒阵列感应测井仪器的井眼校正
47. back draught four-segment type mandrel
四棱锥卷筒
48. Replacing Hydraulic Pressure Bracket Mandril in Returning Mining
回采工作面中液压支架顶梁的更换
49. How to Use Hydraulic Cylinders in Mandrel Drawing Mechanism of Mould
在塑料模中应用液压抽芯机构
50. The length、diameter and using time of mandril are needed in the process of manufacturing the pipe.
在扩管生产中,需要实时了解每根顶杆的长度、外径、使用次数等信息。
51. The combination of spring,mandrel and spherical in the structure was adopted to control the orientation of replacable bit.
在结构上采用弹簧、顶杆、球形铰组合来控制可换钻头的定位;
52. The combination of spring, mandrel and spherical in the structure was adopted to control the orientation of replacable bit.
在结构上采用弹簧、顶杆、球形铰组合来控制可换钻头的定位；
53. Keywords spring mandrel;coldandwarm composite extrusion;numerical simulation;
地弹簧芯轴;冷温复合挤压;数值模拟;
54. Finite element analysis for segment of lever-plunger mandrel
基于有限元分析的卷筒扇形板结构优化设计
55. Keywords pedestal cover;injection mold;slant mandril;angle - side core pulling;fixed - distance parting;
基座盖;注射模;斜顶杆;斜侧抽芯;定距分型;
56. Development of a Special Mandrel for Installation of Prefabricated Drains
塑料排水板特殊打设头的研制
57. Research and Development of the Mould Mandrel through Injection Blow Molding
塑料注吹模具芯棒的研究开发
58. Mainly by motor, framework, other tube body, put on, turn tube, empty mandrel, big gear wheel, pinion, move it jaw board and quiet jaw board make up round in grades.
它主要由电动机、机架、外筒体、分级罩、回转筒、空心轴、大齿轮、小齿轮 、动颚板和静颚板组成。
59. The installation tool maintains sleeve position in the hole while pulling the mandrel into, and expanding the sleeve until the mandrel breaks off at a predetermined point.
安装工具将套筒定位在孔内，同时向往外拉心轴，套筒受力膨胀，心轴在预定受力点被拉断。
60. Keywords Centering roller Clasp force Mandril Rolling center line;
定心辊;抱紧力;顶杆;轧制中心线;
61. Technical Development of Full-floating Mandrel Mill Process of Baosteel Tube Plant
宝钢钢管全浮动芯棒连轧工艺的技术进步
62. An overall measurement of all the relevant parameters of each roll stand of the fully-floating man-drel pipe mill located at Baoshan I &S Co.,Ltd.,including rolling force and mandrel velocity,etc.
对宝山钢铁股份有限公司的全浮动芯棒连轧管机组各机架轧制压力、芯棒运动速度等一系列参数进行了综合测试,获得了轧件速度曲线,并探讨了轧件与芯棒速度之间的关系;
63. This paper introduced the instance of applying DRI in steelmaking for retained mandrel steel,and achieved DRI was used in the steelmaking for the high quality steel products.
对山东省电炉钢生产状况进行分析，同时结合市场的需求，提出采用直接还原铁冶炼高附加值的纯净钢是提高产品竞争能力的一项有效措施。
64. The die of NC tube bending is composed of bending die,clamp die,wiper die,pressure die and mandril.
导管数控弯曲模具包括弯曲模、夹模、压模、防皱模和芯棒。
65. Mushroom head break mandrel closed end blind rivets
封闭型扁圆头抽芯铆钉
66. Bend the test piece 180 degrees over a mandrel with its longitudinal axis normal to the axis of mandrel.
将测试件在一根芯轴上弯曲180度，使其纵向轴线垂直于芯轴的轴线.
67. The Design of Small Taper Mandrel
小锥度心轴的设计
68. As the most critical factor of MPM process, the groove design of fewer stand mandrel retained MPM significantly affects the rolling course as well as product quality.
少机架限动芯棒连轧管机孔型设计是连轧管工艺的核心，对轧制过程的建立和产品质量起着极其重要的作用。
69. Cursory Review of Groove Design of Fewer Stand Mandrel Retained MPM
少机架限动芯棒连轧管机孔型设计的探讨
70. Keywords Process;Steel Tube;Mandrel Mill;Semifloating Mandrel;
工艺;钢管;连轧管机;半浮芯棒;
71. paracentesis trocar with plain mandrel
平穿刺套管针
72. Cylinder Pushing Force Determination for Pay-off Reel Mandrel
开卷机卷筒涨缩缸推力的确定
73. The improvement of mandrel for pay-off reel
开卷机芯轴改造
74. Mushroom head break mandrel blind rivets
开口型扁圆头抽芯铆钉
75. When the tension formed by the setting pressure is greater than the tension of the elastic claws,the elastic claws open outwards,the mandrel goes down and the compression packing element is set.
当遇阻压力或坐封压力形成的向外张力大于弹性爪张力时,弹性爪向外张开,心轴下行,压缩胶筒坐封。
76. THE INFLUENCE FACTORS ANALYSIS OF USEFUL LIFE OF MANDREL BAR FOR THE RETAINED MANDREL MILL
影响限动连轧机组芯棒使用寿命的原因分析
77. Overhang expand/collapse type Reel Mandrel with outboard bearing support.
悬臂式的带有外支撑的可以伸缩膨胀的卷取心轴旋转供油器？？？
78. The effect of inner helix groove must be considered when strip width,sizing roll pass,mandrel diameter and sizing force are to be determined.
指出在确定带钢宽度、定径辊孔型尺寸、芯棒直径及定径力等参数时应充分考虑辊轧螺旋槽的影响。
79. It is concluded that using the pilger pipe mill to produce medium-sized mandrel is one of the possible approaches to localization of such product.
指出用皮尔格轧机生产中直径芯棒是实现其国产化的途径之一。
80. Keywords Pushed-elbow Cold -reheat Redius of bend Horn form mandril Middle-cross-section layer Induction heat;
推制弯头;再热冷段;弯曲半径;牛角芯棒;中性层;感应加热;
