midships

midships

1. Midships Rudder to be held in the fore and aft position.

1正舵舵保持在船首尾线位置上。

2. On the design of midship section of 300 000 DWT VLCC

300000dwt 超大型油船的中剖面设计

3. {0>Article 70 The shipping administration authority or the local government may, as it deems necessary to limit the draft of small ships, assign the maximum draft and mark it on both midship sides.

<}0{>第70条 航政主管机关或直辖市、县(市)政府，认为小船有限制吃水之必要者，得勘划最高吃水尺度，标明于船身中部两旁。

4. The GT-R is loosely based on Nissan's flexible FM platform but it contains so many unique elements that engineers have a separate name for the platform - PM premium midship.

GT的-R是日产的基础上松散的灵活调频平台，但它含有许多独特的内容，工程师有一个单独的名称该平台-下午溢价船中。

5. area of midship section

[机] 中央横断面积

6. midship section

[船]船(体)中(段)断面图

7. Midship cannoneers,sight the masts.

|中央炮手 瞄准敌人的主桅!

8. midship optimum design

中剖面优化设计

9. midship section design

中剖面设计

10. Side curtain, draw bar, midship axles!

中国基本上无踪迹的东西们...

11. midship engine

中置式发动机

12. midship pump

中置泵

13. midship frame

中部肋骨

14. midship bulkhead

中部舱壁

15. midship mounting

中间支承

16. midship tank

中间水舱

17. midship shaft bearing

中间轴轴承

18. midship shaft bearing cover

中间轴轴承盖

19. Advances in the optimum design of the oil tanker in China are reviewed, including the longitudinal component of the midship section, the transverse component and the transverse bulkhead.

从中剖面纵向构件优化设计、横向构件优化设计及横舱壁结构优化设计三方面评述了国内油船结构优化设计的现状；

20. He has the responsibility and authority for preparation of hull initial drawings such as construction profile, midship section, shell expansion and etc.

他有责任和权利准备船体初始图纸，像建筑轮廓，船体中央部分，船壳扩展等。

21. Wherethe long bridge deck within 0.5 L amidships is regarded as strengthdeck, the midship section modulus and minimum thickness of the deckplating comply with the requirements of 2.2.1 and 2.4.2.l of this isChapter.

例1:在船中部0.5L区域内的长桥楼甲板作为强力甲板时，其船中剖面模数及最小厚度应满足本章2.2.1及2.4.2.1的要求。

22. Keywords VLCC Design of midship section;

关键词VLCC;中剖面设计;

23. double barrel midship pump

双筒船中部抽水泵

24. After optimization of the midship section structure, the paper researches on optimum design of large crude oil tanker transverse bulkhead structure based on DNV rules.

在中剖面结构优化设计的基础上,本文研究了基于DNV规范的大型油船横舱壁结构优化设计。

25. In the center, in other words “midship” of these entrance areas, is the exhibition hall, which joins all the theatre foyers together.

在中央，换句话说，在这两个入口区域的“船中央”是展览厅，它把剧院的所有休息室都连接起来。

26. Optimum design of midship sectional transverse members based on genetic algorithm

基于遗传算法的油轮中剖面横构件优化设计

27. Optimization of Midship Section Structure of Large Crude Oil Carrier Based on Genetic Algorithm

大型油船中剖面结构优化设计的遗传算法

28. large amounts of piping are to be seen on the deck running from the pump rooms to the discharge manifolds positioned an midships,port and starboard.

很多管道系统将被看见在跑从泵房的甲板到放电多头管安置了船中央地，口岸和右舷。

29. The drain driving section was located at midship and multiple driving rigs were installed on the barges for plastic drain installation.

打设船采用在船钟设打设区的结构，且采用多台成组的打设方式；

30. The weight of midship section structure for large crude oil carrier is minimized based on DNV rules.

摘要基于DNV规范对大型油船中剖面结构进行了优化设计。

31. The optimization of the midship section structure of a large crude oil carrier with genetic algorithm based on DNV rules is introduced.

摘要采用遗传算法对大型油船中剖面结构进行了基于DNV规范的优化。

32. The paper described a knowledge-based CAD system for the generation of containership midship sections, its principles and the process of its development.

文中介绍了集装箱船中剖面生成基于知识的计算机辅助设计系统，及其基本原理。

33. The weight of large crude oil carrier midship section structure is minimized with genetic algorithm based on DNV rules.

本文采用遗传算法对大型油船中剖面结构进行了基于DNV规范的优化。

34. midship the helm!

正舵!正舵

35. The ship to be arranged as a single decker. Machinery to be arranged midship and all accommodation forward. The ship to be dimensioned for a maximum draft (approx. 6,20 m).

此船按单甲板布置,主机布置在船中部,所有的膳宿布置在船前面。在最大吃水条件下标注尺寸(大约6.2m)。

36. Keywords Oil tanker;Common Structural Rules;Load Calculating;Midship Section;Buckling Strength;Finite Element;

油船;共同结构规范;载荷计算;中横剖面;屈曲强度;有限元;

37. Distance from midship to center of floatation

浮心距船中距离漂心距船中距离

38. Distance from Midship to Center of Buoyancy

浮标中心距船体中央距离

39. Immersed Midship Section

浸水船中剖面

40. So drawing andcalculating of the midship structure must be modificated again and again, untilthe perfect consistence between the data and graph is realized.

特别是在手工设计为主的时期，浪费了大量的人力物力。

41. Article 70 The shipping administration authority or the local government may, as it deems necessary to limit the draft of small ships, assign the maximum draft and mark it on both midship sides.

第70条 航政主管机关或直辖市、县(市)政府，认为小船有限制吃水之必要者，得勘划最高吃水尺度，标明于船身中部两旁。

42. During the process of the midship section design, drawing and calculatingare carried through crossly;

而且，随着结构设计阶段的发展，局部性结构设计不断深化，舯部结构的计算和图纸的绘制均不免要反复加以修改，直到彼此能相互准确呼应。

43. Moment of inertia of midship section

舯剖面惯性矩

44. midship section coefficient

舯剖面系数

45. Midship Section Area

舯剖面面积

46. The thickness of side plates shall be approved by Classification Society.The thickness of steel plates from midship to both ends shall be applied as per rules of classification society.

舷侧外板的厚度应经船级社认可，从船中部至船两端的外板厚度应满足规范要求。

47. midship deep tank aft.

船中后深舱

48. midship coeficient

船中系数

49. midship frame space

船中部肋骨间距

50. hull midship section modulus

船体中剖面模数

51. curve of area of midship section

船体中段剖面面积曲线

52. Midship section design is a vital step among ship's design.

船舯所受弯矩最大，是全船结构主要矛盾之所在，组成了船体结构的全局性构想，因而是船舶设计的重中之重。

53. Keywords ship;VLCC;CSR;longitudinal strength;midship section design;

船舶;超大型油船;结构共同规范;总纵强度;中剖面设计;

54. Keywords intermediate bearing;midship shaft;finite element analysis;

轴承平衡支撑;中间接轴;有限元分析;

55. It is also better to stay in midship than at the bow or stern because that is where the sea swell is less pronounced.

还有，你最好待在船中间的位置，避免待在船头或船尾，因为中间的位置海浪不那么强烈。

56. Casting Die Design of Midship Mounting on Heavy Duty Starters

重型减速起动机中间支架压铸件模具设计

57. Nishihara S.Ultimate longitudinal strength of midship cross section.Naval Arch.& Ocean Engng,1984(22):200-214

马志敏.船体梁极限强度分析.武汉:武汉理工大学交通学院,2003

58. Midships area coeff.

：船舯剖面系数。