mold

mold

1. A trowel-shaped tool for smoothing the surface of clay, sand, or plaster in a mold.

(瓦工的)镘用以刮光模子中泥土、沙粒或灰泥的表面的铲型工具

2. The word cast is used in the sense of "casting into a mold.

“造型”(Cast)的作用是“与一个模型匹配”。

3. "Modern Mold &Die" has a readership over 100,000.

《现代模具》拥有固定读者约10万人。

4. Chiefly the mold of a man s fortune is in his own hand.

一个人的命运掌握在自己手中。.

5. Chiefly the mold of a man's fortune is in his own hands.

一个人的命运模式主要是由自己决定的。

6. Some molders believe a mold spray is of no value until it has a real vile odor.

一些铸造工人认为，除非脱模剂发出十分令人作呕的气味，不然就毫无价值。

7. This machine can mold the joint point and instep point simultaneously.

一次整型动作即可同时完成关节点与脚背点之定型。

8. The sweatful practice sessions mold mighty football teams.

一连串汗流浃背的训练磨练出实力强大的足球队。

9. TK is a world-class injection mold maker in China.

东江是中国模具行业中最具规模的厂家之一。

10. Extensive knowledge of Injection mold structure and manufacturing flows.

丰富的模具构造经验和熟知生产流程。

11. To that end, they hire, recruit, and train employees in their own mold.

为了达到那个目的,他们以自己的模式雇用、招收、培训员工。

12. Producing Mold Area Sifang Mold Ltd., Co.

产品模具手板模型。

13. The design process of earphone bracket mold is introduced.

介绍了耳机支架模具的设计过程。

14. He's got a bad attitude about mold.

他不喜欢霉菌。

15. He's made in his father's mold.

他个性像他父亲。

16. They looks as come from the same mold.

他们俩像是一个模子刻出来的.

17. They filled the mold with liquid steel and let it cool.

他们在模具中填上液态钢，让它冷却。

18. They are cut from the same mold.

他们是一个模子刻出来的.

19. They were cast in the same mold.

他们气质相同。

20. He was first and foremost a fiery orator in the 19th century mold .

他却是19世纪中期首屈一指的富于热情的雄辩家。

21. His father was an excellent poet: he is cast in the same mold.

他的父亲在世的时候是一位杰出的诗人；他现在是子继父业。

22. He is cast in his father's mold.

他长得和他父亲一模一样。

23. This figure illustrates an example of a large mold.

以下是大型注塑模具的结构示意图。

24. Low pressure mold closing is standard .

低压开关模装置可保护模具的安全。

25. Do you know how to set the amplify mold of the copy machine?

你知道怎么将复印机设定在缩印(放大)模式上吗?

26. To mold into a rigidly conventional pattern.

使僵化使墨守成规

27. You are enable to increase the number of shell mold production.

使铸型的生产效率的提高成为了可能。

28. The mitotic route is seen, for example, in the slince mold Physarum.

例如，有丝分裂的途径可以看到在粘菌之绒泡。

29. How does the supplier control mold hardness?

供应商如何控制型腔的硬度?

30. Your order is far from our MOQ. We need to charge cost of mold.

像这样的问题很多，样品、模具、设计费用等，因为客户订单不够起定量而必须收取。

31. Have good knowledge in Mold or Trim/Form Machine.

具备丰富的模具及成型设备工艺的知识。

32. Cleans soap scum, mold and mildew stains in days.

几天之内把肥皂残留渣滓,?菌及发霉的痕迹清洁乾净.

33. Setting of the knife mold is rapid,accurate and easy-to-leam.

刀模设定快捷准确，简单易学。

34. Lida Mold Plate Renting Co., Ltd.

利达模板租赁有限公司。

35. The making of such a mold or cast, as with plaster of Paris.

制印模用石膏对这种模型或模子的制作，如用巴黎的石膏

36. To make(a phonograph record or videodisk)from a mold or matrix.

制版按模型或模板制造(唱片或录像片)

37. To make(a phonograph record or videodisk) from a mold or matrix.

制版按模型或模板制造（唱片或录像片）

38. The pastry mold in which this food is baked.

制这道菜的糕点模子

39. Coordinates own department staff to complete mold trial.

协调部门人员组织，完成试模任务.

40. A creamy, mold - ripened cheese that softens on the inside as it matures.

卡门贝干酪一种奶油的、发霉催熟的奶酪，烧熟时其内部是软的

41. A mold, as of a footprint, made for use in a criminal investigation.

印模在刑事侦察中所用而制作的印模，如脚印的印模

42. And plastic mold manufacturing design and development!

及塑胶模具的设计开发制造！

43. Another step in fine-tuning the component of a mold.

另一个步骤是精密的调整模具的结构。

44. It probably had mold on it. Didn't you check?

可能都发霉了呢!你没检查看看?

45. Eyebolt should on the center of the mold(for balance) 85.

吊模螺丝的位置要在前/后模部份的重心,保持平衡；

46. A phonograph record pressed from a master mold or matrix.

唱片从唱片模板或母带压制出来的唱片

47. The Saturn V rocket is sprouting plants and mold and its structure is home.

土星V号火箭正繁演各种植物及菌类还有结构体是温床。

48. On mold engineer advice, design robot hand for injection.

在模具工程师指导下,设计注塑机自动取出治具。

49. Generously grease a mold or casserole dish.

在模子或砂锅中涂抹大量的油。

50. Bread tends to mold in damp weather.

在潮湿天气中面包易于发霉。

51. Cast ceramic mold under vacuum.

在真空环境下倒陶瓷模。

52. Mycelium on cereal grain is termed mold growth.

在谷物上生长的菌丝体叫做发霉。

53. The plastic was poured into the mold and left to set until it was firm.

塑料被注入模子后, 便放在一边让它慢慢凝结硬化。

54. S.M.C B.M.C MOLD.INJECTION MOLD.

塑胶射出成型模、玻璃纤维热压模。

55. To shape or mold(dough, for example) into a particular form.

塑造将（面团等）塑造或浇铸成一特殊形状

56. The night air is usually cool enough to serve as a deterrent to mold growth.

夜间的空气通常都冷到足以抑制霉菌的生长的程度。

57. College degree in mold or mechanical major.

大专学历，相关专业毕业。

58. Women of her mold are easy to see through.

她那种性格的女人是很容易看穿的。

59. Haolilai Mold Plate Renting Co., Ltd.

好利来模板租赁有限责任公司。

60. If you can, please use the same switch case mold as the last time.

如果你能作到,请使用和上次一样的开关箱模具。

61. If the mold spray is sticky, reduce the silicate.

如果脱模剂发粘，则减少硅酸盐。

62. Children mold figures out of clay .

孩子们用粘土塑造人像。

63. Children mold figures out of clay.

孩子们用黏土塑造人像。

64. NINGBO WIN ART SKIN MOLD CO., LTD.

宁波博艺皮塑有限公司。

65. Ningbo Elite Mold Manufacture Co., Ltd.

宁波埃利特模具制造有限公司。

66. NINGBO SOLAR MOLD ENGINEERING CO., LTD.

宁波松瑞塑胶模具有限公司。

67. They are cast in the same mold.

它们是一个模子浇铸成的。

68. It can mold our character, to open up our vision, is our mentor.

它可以陶冶我们的情操，开拓我们的视野，是我们的良师益友。

69. We want to tie in the MKO from the open mold side.

客人希望从开模的方向锁机器顶棍孔.

70. Different time have different concepts on precision or high precision mold.

对于精密或超精密度模具,不同时期有不同的概念。

71. Fleming was amazed by this strange bacteria killing mold.

对于这种能杀死细菌的怪异霉菌，富莱明感到非常地诧异。

72. Manufacturing experiences for variant kind of plastic mold, forming etc.

对各种塑料成型工艺有深刻了解及丰富经验。

73. Convective drying is a main method of drying pulp mold at home.

对流干燥是国内纸浆模塑制品生产工艺中主要运用的干燥方法。

74. Then, electroforming the ellipsoid was used to form a concave mold.

将椭圆光阻透镜进行微电铸，电铸成分为镍。

75. The workers are teeming melten metal into the casting mold.

工人们正把熔化的金属注入铸型模中。

76. Already abroad used on the export mould, bumper mould and IP mold.

已在出口模具、保险杠及仪表板模具上广泛应用。

77. Design of Injection Mold for the Plastic Parts.

带螺纹塑件注射模设计。

78. The common vaginitis is causes by the infusorium or the mold.

常见的阴道炎是由滴虫或霉菌引起的。

79. CHENG XING PLASTIC MOLD CO., LTD.

广州市黄浦区成星塑料模具厂。

80. Data of decor mold design can be managed effectively.

建立了自顶向下的设计模式与导航设计机制，实现了模具设计过程的数据管理。