monomerous

monomerous

1. The versatility of ABS is derived from its monomer building blocks Acrylonitrile, Butadiene and Styrene.

ABS的多功能性来源于其三种组成单体丙烯睛,丁二烯和苯乙烯.

2. The versatility of ABS is derived from its monomer building blocks Acrylonitrile Butadiene and Styrene.

ABS的多功能性来源于其三种组成单体丙烯睛丁二烯和苯乙烯.

3. DZ type outside-pourable monomer hydraulic supports are hydraulic timbering facilities used in coal mine at large.

DZ型外注式单体液压支柱 ,是煤矿普遍使用的液压支护设备。

4. EPDM is a terpolymer elastomer made from ethylene-propylene diene monomer.

EPDM是一种由乙烯 - 丙烯、二烯单聚物构成的三元共聚物弹性材料。

5. The membrane hydrophilicity increases with the introducing of hydrophilic group to the monomer structure.

ODPA和ODA由于亲水基团-O-的引入，使膜具有较强的亲水性；

6. The skeleton of sensors include monomer and oligomer of coumarin, gold nanoparticle and silica nanoparticle.

一旦使感测器分子与分析蛋白质结合，可藉由所设计的信号读出，达到辨识侦测效果。

7. The trimer also breaks down into the toxic monomer form.

三聚体也能分解成有毒的单体形式。

8. Both the monomer and the polymer network will depress phase transition temperatures.

不同的液晶态可通过控制铁电液晶的温度来获得。

9. The synthesized product contained both dimer and monomer of DhHP-9, in which the monomer has high peroxidase activity (64% of MP-11).

与双体相比，单体DhHP-9具有较高的过氧化物酶活性（达到天然微过氧化物酶MP-11活力的64%）。

10. Large molecules resulting from the simultaneous polymerisation of two or more monomer units.

两个或更多单体同时聚合而形成的大分子。

11. Zhongguancun West underground construction is nearing completion, the current entering monomer design stage.

中关村西区地下施工已接近尾声，目前进入单体设计阶段。

12. In order to improve the solutitity of PPTA, a PPTA copolymer solution was obtained by adding a thind monomer, 3,4’-ODA, in PPTA's chain.

为了改善聚对苯二甲酰对苯二胺(PPTA)的溶解性能,在PPTA的聚合过程中添加第三单体3,4’-二氨基二苯醚(3,4’-ODA),得到了PPTA的共聚体溶液。

13. The research provided the applicable functional monomer leading urethano into acrylic ester.

为将氨酯基团引入丙烯酸树脂提供了一种可用的官能单体。

14. The influence of dosage of monomer, emulsifier, initiator, and molecular weight modifier to the property of glueing agent was researched.

为此,研究单体、乳化剂、发剂和分子量调节剂用量对台板胶性能的影响。

15. Affection and friendship it is a relationship between groups, but also can be a relationship between monomer.

亲情与友情它是一个群体关系，也可以是一种单体关系。

16. The Determination and Analysis of Monomer Ginsenoside from Some Germplasm Resources of Panax ginseng and Panax quinque folius L.

人参、西洋参部分种质资源的单体人参皂苷测定分析。

17. The 14 chlorophylls (Chl) in each monomer can be unambiguously distinguished as eight Chla and six Chlb molecules.

人类基因组是非常稳定的。

18. This thesis introduces the development history of polylaurylamide, and the features of different monomer processes are compared.

介绍了聚十二内酰胺的发展历史,比较了不同聚十二内酰胺单体的生产方法特点。

19. The graft copolymer CR-g-BMA was prepared on CR initiated by BPO,with BMA as graft monomer,toluene and ethyl acetate as solvents.

以甲基丙烯酸丁酯(BMA)为接枝单体,甲苯、乙酸乙酯为溶剂,过氧化苯甲酰(BPO)为引发剂,在氯丁橡胶(CR)上进行接枝共聚。

20. Down-powder was grafted with MAH as monomer and CAN as initiator.

以硝酸铈铵(CAN)为引发剂,在羽绒粉体上接枝马来酸酐(MAH)。

21. The addition of proper amount of inhibitor does not affect the rate of graft copolymerization and the unreacted monomer can be recoverd.

但是接枝共聚的化学方法中存在最大的问题是伴随产生大量均聚物,这是反应中所不希望的。

22. But, when it down, the monomer liquid is released and flows into the crack.

但是，当它产生裂缝时，单体形式液体会释放出来并填充到裂缝中去。

23. The tacticity of polymers is mainly influenced by the polarity of substituent group of vinyl monomer.

作者认为影响聚合物等规度的因素主要是取代基的极性效应。

24. Catechu element kind basically comprise by a few kinds of monomer such as EGC, DLC, EC, EGCG, GCG, ECG.

儿茶素类主要由EGC.DLC.EC.EGCG.GCG.ECG等几 种单体组成。

25. In addition,photopolymerization kinetics of HCA was compared with aliphatic hydroxyl-containing monomer,hydroxyethyl acrylate(HEA).

光引发剂浓度对最终双键转化率和反应速率的影响随引发剂不同呈现不同规律;

26. The results are as follow: 1. The content of hexafluoropropene in the terpolymer increases with the mole ratios HFP/CTFE and HFP/E in the monomer feed.

其主要结果是:(1)在上述三元共聚合体系中,HFP在共聚物中含量与单体克分子比(HFP/CTFE和HFP/E)成正比关系。

27. Then,catechin monomer was isolated and purified by HSCCC with the purity above 98%.

再以该茶多酚为原料,应用HSCCC分离纯化儿茶素单体,所得EGCG产品的纯度达到98%以上。

28. Monomer A chemical combination of molecules corresponding to the individual units of a polymer. It is capable of being formed into a polymer.

分子的化学结合,相等于聚合体内的个别单元。它有构成聚合体的能力。

29. The recovery process of monomer smoke at strand spinneret from nylon6 production was analyzed.

分析比较了尼龙6生产中注带处单体烟的几种回收方法。

30. The graft copolymerization of acrylamide monomer onto polyamide polyamine epichlorohydrin(PAE) was performed in solution polymerization process.

利用溶液聚合的方法,使丙烯酰胺单体与不饱和聚酰胺多胺环氧氯丙烷树脂接枝共聚。

31. The particle size and distribution of latex was influenced by functional monomer.

功能单体对胶乳粒子大小及分布有较大影响；

32. Add the crosslinking monomer to improve core-shell interpenetrating network.

加入了交联单体,提高核壳的交联度;

33. Added monomer diffuses into the micelle for polymerization.

加入的单体扩散进入胶团做聚合反应。

34. Monomer: A chemical combination of molecules corresponding to the individual units of a polymer. It is capable of being formed into a polymer.

单体:分子的化学结合，相等于聚合体内的个别单元。它有构成聚合体的能力。

35. The monomer and copolymer were characterized by IR.

单体及共聚物用IR等进行了表征。

36. The monomer, or base epoxy, is a light amber fluid which is usually quite viscous.

单体或碱性环氧树脂，是一种淡琥珀色的液体，通常都是很粘的。

37. Monomer welding is overseeing the important part.

单体焊接是单体大修的重要环节。

38. The monomer ratio, CPE content, swelling time, conversion and the amount of mercapt...

单体配比、CPE用量、溶胀时间、转化率及硫醇用量等均有影响。

39. Sell condom alone or sell newspaper alone, namely monomer machine alone.

单独售套或单独售报，即单体机。

40. Removing Phenylacetylene(PA) from crude styrene is an important step in producing high quality styrene (ST) monomer.

去除苯乙烯(ST)中的苯乙炔(PA)是生产高品质苯乙烯单体产品的重要环节。

41. Overcame real wood floor to become warped because of rising monomer systole, easily again interstitial inadequacy.

又克服了实木地板因单体收缩、轻易起翘裂缝的不足。

42. The overall activation energy grows with the proportion of TMI increases in the monomer.

反应总体活化能随TMI含量增大而升高,温度升高TMI含量对反应速率影响增大。

43. It is found that the rate of graft poly-merization increased with the increase of radiation dose, dose rate and monomer concen-tration.

发现接枝率随着剂量、剂量率及单体浓度的增加而增加。

44. Besides, the silicone monomer and the acrylate monomer were also introduced.

同时,对有机硅单体和丙烯酸酯单体也作了介绍。

45. The photopolymerization characteristics of this monomer was investigated by Fourier Transform Real Time Infrared spectroscopy(FT-RTIR).

同时使用傅立叶实时红外(FT-RTIR)对该杂化单体的光聚合性能进行了研究。

46. At the same time, the Fe3+ ion shell was the oxidant to polymerize pyrrole monomer.

同时，Fe3O4粒子表面的Fe3+可以氧化吡咯单体聚合而得到Fe3O4/聚吡咯复合材料。

47. A hardening agent mixed with the monomer will induce polymerization.

固化剂与这种单体混合将引起聚合反应。

48. Incorporation of silicone monomer for copolymerization will improve the water, alkali and acid resistance of the copoly mer.

在体系中加入硅单体参与共聚,可以明显提高共聚物的耐水、耐酸、耐碱性能。

49. The production of polymer in each case involves the rapid addition of monomer to a few active centres.

在各种情况下聚合物的生成都是单体对少数几个活性中心的快速加成。

50. It was found, when the quenchingair speed is 0.4m/s in producing LEY, the speed of monomer suctionis-1.2m/s, and the quality of LEY is the best.

在纺制LEY中,当侧吹风风速在0.4m/s、单体抽吸风速在1.2m/s时最为理想。

51. In condensation polymerization, each monomer unit must have at least two functional groups.

在缩聚反应中,每个单体至少要有两个官能团；

52. It is not surprising to find that the observed order in monomer for the polymerization exceeds unity.

在聚合中发现单体的反应极数大于1是不足为奇的。

53. A polyfunctional monomer is one with three or more functional groups per molecule.

多官能度单体是指每个分子含有三个或三个以上官能团的单体。

54. Solar cell components, the use of single crystal silicon and polysilicon and amorphous silicon solar cells monomer.

太阳能电池组件，采用单晶硅和多晶硅及非晶硅太阳能电池单体。

55. If all the glycosyl units are of the same sugar type, they are homogeneous as to monomer units and are called homoglycans.

如果所有糖单元都是相同类型的糖,对于单体糖元他们是均匀的,称同聚糖。

56. In practice, such little information rarely suffices but, even so, a large number of monomer reactivity ratios have been determined.

实际工作中，这样少的情报难以满足需要，但是既使如此，已经测得了大量单体竞聚率。

57. Some processing condition such as consumption of monomer, initiator, meutralization degree and polymerizing temperature were explored.

对单体用量、发剂用量、和度、应温度等工艺条件进行了优化研究。

58. The process of polymerization temperature and monomer conversion in later period of polymerization in PVC production was discovered.

对聚氯乙烯生产中聚合后期提高聚合温度和单体转化率的方法进行了探索。

59. The ozone activation time, the content of hydrophilic monomer and the concentration of antistatic agent were optimized.

对臭氧活化时间、接枝单体用量、水性抗静电剂的浓度等条件进行了优化。

60. The suitable add amount of inhibitor was 400ppm when rectifying raw monomer and the feasible lye was 6%oNa2CO3 when using alkali to wash.

对裂解粗单体精馏时，阻聚剂的适宜加入量为400PPM，碱洗时适宜的碱液为6‰Na_2CO_3。

61. To two Large expanse of protectorate, 6 style locality protection path, 24 monomer protection construction will carry on the restoration improvement.

将对两块成片保护区、6条风貌区域保护道路、24处单体保护建筑进行修缮整治。

62. And the monomer and hyperbranched polyesters were characterized by FIIR, DSC and DTG techniques.

并用傅利叶红外、DSC、热重分析等手段对单体和聚合物进行了表征。

63. The contents of residual monomer in the polymers produced are determined by high-pressure liquid chromatography.

并用高压液体色谱法测定了聚合物中残余单体含量。

64. Guangzhou Weixiang Monomer Fragrances Co., Ltd.

广州伟香单体香料有限公司。

65. By the high-energy radial, acrylic monomer is grafted on the surface of polypropylene filler.

应用高能射线辐照技术,在聚丙烯填料表面接枝丙烯酸单体进行改性。

66. When the amount of PHMS, AA and emulgent are respectively 16%, 3% and 0.5% based on monomer mass, latex has the best stability.

当PHMS为单体品质的16%、AA用量为单体品质的3%、乳化剂用量为单体品质的5%时，乳液的稳定性最好。

67. Whenever two monomer molecules react, the product must contain a functional group capable of reacting with another molecule of monomer.

当两个单体分子发生反应时,其产物中必须具有可与另一单体反应的官能团。

68. Huizhou MMA Co.Ltd. (HMC) will be an important MMA monomer manufacturer in China invested by the Mistuibishi Rayon Group.

惠州惠菱化成有限公司是日本三菱丽阳集团在中国的全资子公司。

69. We are confident that the low levels of residual acrylamide monomer detected in some of the products are completely safe.

我们深信在某些产品中检测到微量丙烯酰胺单体残留物是完全安全的。

70. By definition an exclusively difunctional monomer can only give rise to a linear polymer.

按照定义，一个特定的双官能单体，仅仅能得到线型聚合物。

71. The mold is then set down atop a layer of a liquid monomer on the surface of a chip.

接下来用紫外光射透石英板，使液体硬化成聚合物，再将晶片做进一步的完成步骤。

72. The catalyst in the solid plastic then reacts with the liquid monomer.

接着，在固体塑料中的催化剂会随着液体单体一起反应，

73. Abstract: 5-hydroxymethylfurfural(HMF) is a kind of important monomer of biomaterials and possesses very wide application value.

摘要: 5-羟甲基糠醛(HMF)是一种重要的生物基材料单体，具有非常广泛的应用价值。

74. Copolycondensation by adding third or fourth monomer into the polymerization system is an efficient way to improve the properties of PPTA.

改善对位芳纶（PPTA）性能的有效方法是在聚合体系中加入第三第四单体进行共缩聚改性。

75. Methods Liquid chromatography and recrystallization were used to obtain the monomer of rubescensin A.

方法利用液相色谱分离技术和重结晶方法获得冬凌草中的有效成分。

76. Unreacted monomer is stripped and recycled.

未反应单体经汽提后回收。

77. This paper introduces a research on the diffusion of Vinyl Chloride Monomer (VCM) from PVC pipe into water phase.

本文首先从硬聚氯乙烯(upvc)管扩散入水中的氯乙烯单体(VCM)的机理和动力学入手。

78. The main reason of shrinkage stress during curing period is the change from distance between monomer moleculers to covalent distance .

树脂固化时收缩应力的主要原因是单体之间的分子间距离缩短变为共价距离。

79. The crystal structure of the nucleoprotein is a trimer, with each monomer molecule shaped like a crescent.

核蛋白晶体构造是一种由三条大型分子链组成的三聚体，每一条支链形状就象鸡冠一样。

80. According to this view, the most reactive monomer will yield the least reactive radical, and so on, because of their structural relationship.

根据这一观点，最活泼的单体应产生最不活泼的自由基，诸如此类，由于它们结构上的关系。