mtbf
mtbf
1. Job Description - Analyze customer RAMS requirements - Perform complete RAMS analysis, including MTBF calculation, LCC calculation, FMECA, fault tree analysis etc.
2. 执行整体的RAMS分析，包括MTBF计算、LCC计算、FMECA分析等；3. 制定行动方案以满足系统或元器件的RAMS要求；
2. The Six Sigma Black Belt will be able to compute basic reliability statistics (mtbf, availability, etc.).
6西格玛黑带应能计算基础的可靠性统计（平均无故障时间、可用性等）。
3. MTBF and Reliability of LED Outdoor Full-color Display
LED户外全彩屏的MTBF和可靠性
4. Mean Time Between Failure (MTBF)
MTBF
5. Analyses for risk and applying qualification of MTBF assurance test
MTBF保证试验应用条件及风险分析
6. MTBF -- it is an ensemble characteristic which applies to populations (i.e. "lots") of things; not a sample characteristic which applies to one specific thing.
MTBF是统计量，对大量产品、长时间工作而言是正确的。但对个别产品而言，就不好用了。
7. The results is that the MTBF is alout 500 to 900km, the MTTR is about 11 to 14 hours, and the economic life is about 10 to 12 years.
MTTR约11-14小时; 经济寿命约10-12年.
8. A New Method of Computing Software MTBF Based on Unascertained Mathematics
一种基于未确知数学计算软件MTBF的新方法
9. however, doing so would increase board area and cost, could negatively impact the mean time between failure (MTBF), and may cause performance degradations when the DSL modem operates normally, i.e.
不幸的是，缺少这些元件的校正会有效的限制SELT的工作范围。
10. Carry out continuous improvement projects to achieve higher MTBF and longer life-span of equipment.
不断进行设备升级以达到更高的MTBF以及更长的维护周期。
11. For the robot to achieve the required MTBF at the system level, each subassembly must achieve its target MTBF value shown in Table 4.
为实现机器人的MTBF需要在系统级，每个组件必须实现其目标的MTBF值列于表4 。
12. The Determination of MTBF Confidence Interval at Product Designing Finalization
产品设计定型时MTBF置信区间的确定
13. 2.reliability indicator includes Mean Time To First Failure (MTTFF) and Mean Time Between Failure (MTBF);
以“在规定的时间间隔内出现的”故障次数来表示的一种故障阀值。
14. CLASSICAL CONFIDENCE LIMITS ON THE MTBF IN THE DUANE MODEL
关于Duane模型MTBF的经典置信限
15. The Calculation of MTBF on RAID
关于RAID的MTBF的计算
16. Specifically, you should consider the mean time between failures (MTBF) of each device in the critical path.
具体地说,应考虑关键路径中每个设备的平均故障间隔时间(MTBF)。
17. The result of the analysis and computation shows that the MTBF of this system is 113 hours.
分析计算结果表明,该系统的MTBF为113h;
18. The individual parameter for evaluating overhauled motor vehicles are: mean time to first failure(MTTF),mean time between failures(MTBF),equivalent failure rate(D),ect.
可靠性单项指标的确定 :平均首次故障里程 (MTTF) ,平均故障间隔里程 (MTBF) ,当量故障率 (D) ;
19. An Approximate Algorithm of MTBF for a Maintainable System
周期性维修系统MTBF的算法分析
20. Achieve all tool related targets, includes MTTR, MTBF, Uptime, cost control, process target, scrape production ratio.
在各种大型太阳能光伏并网和独立发电系统的工程设计、建设安装、工程维护等方面，尚德电力积累了成熟的技术和丰富的经验。
21. 6.We often need evaluating the reliability of entire system in engineering,such as failure rate, MTBF, MTTR, and we must do some caculating and allocating works to satisfy the procedure target.
在工程设计中经常要评估产品可靠性方面的指标,如失效率、平均无故障时间、平均维修时间等数值的测算和分配。
22. The average time from start of use to first failure in a large population of identical systems, components, or devices. Abbreviated MTBF.
大多数相同的系统、组件或者设备的，从开始使用到第一次发生故障以来的平均时间。缩写为MTBF。
23. MTBF How to Estimate MTBF of Software
如何估计软件的
24. Regularly perform failure analysis and obtain MTBF data for all local components.
定期实施失效分析并为所有区域成分获取。
25. The result of life-test has shown that the MTBF of the device is longer than 19496 hours.
寿命试验结果表明内调制光敏管的平均寿命超过19496小时。
26. mean time between failure ( MTBF)
平均失效时间间隔MTBF
27. MTBF mean time between failures
平均失效间隔时间
28. mean time between failure ( MTBF )
平均故障时间间隔（MTBF）
29. Mean time between failure(MTBF)
平均故障间隔时间
30. As the production reliability criteria MTBF is used widely,which narrates problems directly and calculates simply by mathematics.
平均故障间隔时间(MTBF)作为产品的可靠性指标,因其表述问题直观、数学处理简单,而得到了广泛地应用。
31. Mean Time Between Failures MTBF;
平均故障间隔时间MTBF；
32. Study on MTBF Assurance Test Risks
平均故障间隔时间保证试验风险研究
33. MTBF Mean Time Between Failure
平均无故障操作次数
34. It is demonstrated, focusing on the features of ship products, in terms of theory and practice, that the MTBF assurance test is practical in technique and acceptable in risk to the consumer.
并针对舰船产品的特点,从理论和实践两个方面论证了MTBF保证试验在工程上是实用的,其风险可被使用方接受。
35. The reliable design grants the tremendous improvement in MTBF.
应用可靠性设计技术，保证了整机平均无故障时间（MTBF）大幅度提高；
36. Keywords Express Platform;reliability;MTBF;aging and filtering;
快速测井平台;可靠性;MTBF;老化筛选;
37. Provide reliability calculations;Mean Time Between Failure (MTBF) rates.
提供可靠性计算，平均间隔时间衰竭（ MTBF值）速率。
38. Abstract: We often need evaluating the reliability of entire system in engineering,such as failure rate，MTBF，MTTR，and we must do some caculating and allocating works to satisfy the procedure target.
摘要：在工程设计中经常要评估产品可靠性方面的指标，如失效率、平均无故障时间、平均维修时间等数值的测算和分配。
39. MTBF Mean Time Before Failure
故障前平均时间
40. Mean time between failures MTBF
故障平均修复时间
41. The most important quality standard of NC machine tools is the using reliability (weighed by MTBF).
数控机床最关键的质量指标是使用的可靠性（以故障间隔时间MTBF来衡量），在这个方面，国产数控机床与国外名牌产品还存在着相当的差距。
42. Keywords CNC system;Mean time between failure（MTBF）;Reliability;
数控系统;平均故障间隔时间;可靠性;
43. And its MTBF achieves 20000 hours.
整机的MTBF达到20000小时。
44. Abstract: Based on the mission requirement of balloon-borne electronic system, the traditional MTBF centered design ideology is changed in this paper.
文章摘要: 根据气球载电子系统的特点和任务需要，改变传统的以平均故障间隔时间为中心的设计思想，介绍了一种基于无维修使用期的可靠性设计思想。
45. MTBF Maximal Time Between Faults
最大无故障工作时间
46. In this paper the AMSAA model for multi-system simultaneous development is discussed. The maximum likelihood (ML) estimates of the parameters and the confidence intervals of the (MTBF) for Weibull process are presented.
本文将AMSAA模型推广到多台系统进行同步开发的情况,给出了Weibull过程参数的最大似然(ML)估计及平均无故障工作时间(MTBF)的区间估计。
47. S. Speaks, "Reliability and MTBF Overview", Vicor Reliability Engineering, pp. 2-10, 2002.
柯辉耀，“可靠度保证-工程与管理技术之应用”，中华民国品质学会，民国八十九年九月。
48. 8.However, due to being built with COTS, clusters always have short MTBF, node failure always happens during cluster running.
然而采用商品化市售部件构造的集群系统平均故障间隔时间短，在运行时容易发生节点失效。
49. Reckoning Extent of Electronic Product Reliability Test MTBF Value
电子产品可靠性试验MTBF真值的区间估计
50. Keywords electromagnet compatibility（ EMC） electromagnet interfere（ EMI） mean time between fails（ MTBF）;
电磁兼容性;电磁干扰;平均无故障时间;
51. At present, the company is pursuing "6SIGMA" quality management methods and concepts, in research and development, the implementation of MTBF reliability management approach.
目前，公司正在推行“6SIGMA”品质管理方法和理念，在研发方面，推行MTBF可靠性管理办法。
52. Dispense with the battery system and improve MTBF and battery secondary pollution.
省掉蓄电池并可提高系统的平均无故障时间和蓄电池的二次污染。
53. A Bayesian Approach to Determining MTBF Growth for Electronic Products
确定电子产品MTBF增长的Bayes方法
54. Given the failure rates for given subsystems, the Six Sigma Black Belt will be able to use reliability apportionment to set mtbf goals.
给出给定子系统的故障率，6西格玛黑带应能利用可靠性分配原则设定平均无故障时间目标。
55. Bayesian-point and-interval estimations of the scale and shape parameters and the achieved MTBF of the system are obtained.
获得了尺度参数、形状参数以及系统能达到的MTBF的Bayes点估计和区间估计。
56. The Six Sigma Black Belt will be able to compute basic reliability statistics (mtbf, availability, etc.
西格玛黑带应能计算基础的可靠性统计(平均无故障时间、可用性等)。
57. At last, reliability and availability of the system is analyzed and the system MTBF is discussed.
论文最后还对兼容以后系统的可靠性和可用性进行了分析，讨论了设备的平均无故障时间。
58. The objective of reliable management is using minimum costs and achieving maximum MTBF and minimum MTTR and then improving the reliability of production equipments to the maximum extent.
设备维护的目的在于用最小的投入，获得最大化的设备故障间隔时间（MTBF）和最小化的故障维修时间（MTTR）。
59. 94. The Six Sigma Black Belt will be able to compute basic reliability statistics (mtbf, availability, etc.
译文：六西格玛黑带应该能够计算基础的可靠性统计（平均无故障时间、有效性等）。
60. 95. Given the failure rates for given subsystems the Six Sigma Black Belt will be able to use reliability apportionment to set mtbf goals.
译文：给出给定子系统的故障率，六西格玛黑带能利用可靠性分配原则设定平均无故障时间目标。
61. Using the methods presented, the reliability improvement goal can be obtained, and the automobile's MTBF value during the warranty period can be estimated.
该方法可以有效地明确汽车可靠性改进工作的方向，并通过定期对整车的平均故障间隔时间(MTBF)进行评估，来评价企业各项可靠性工作的综合效果。
62. In order to improve the production quality and increase mean-time-between-failure (MTBF) of equipment, the remote diagnosis system has got wide attention in recent years.
近年来为了要增加产品的良率以及提高平均故障时间间隔，远距诊断系统逐渐受到广泛的重视。
63. This very high MTBF is achieved by an appropriate cooling of each component with an efficient cooling plate.
这个很高的MTBF是通过用一个高效的冷板对每个元件适当地冷却而获得的。
64. Generally there are four main difficalties in evaluating complex large-scale system reliability, availability and MTBF the system structure may be very complex;
通常在评估复杂大型系统的可靠性、可用性和MTBF方面有4个主要困难：系统结构可以很复杂；
65. Theoretic calculations show that with redundancy control the mean-time-between-failures(MTBF) of the vacuum system is doubled at least.
通过计算，冗余控制可使整个负压系统的平均无故障工作时间至少增加一倍。
66. Parameter estimation and hypothesis testing methods were used to analyse MTBF model of a certain serial CNC lathes.The result shows that MTBF model submits to Weibull Distribution.
针对某系列数控车床的故障间隔时间分布模型进行了参数估计和假设检验,得出了服从威布尔分布的结论。
67. Keywords dumpling machine;extruting machine of dough;reliability design;MTBF（Mean Time Between Failure）;MTTF（Mean Time to Failure）;Failure mode;
饺子机;输面团螺杆挤出机;可靠性设计;平均无故障工作时间;平均寿命;故障模式;
68. The Method of Calculating for Reliability Parameter MTBF of High-frequency Switch Power Supply System
高频开关电源系统可靠性指标MTBF的计算方法
