multiaxial
multiaxial
1. On Cyclic Deformation of 304 Stainless Steel under Strain-Controlled Nonproportionally Multiaxial Loading at High Temperatures
304不锈钢高温非比例多轴应变循环变形行为研究
2. Keywords GH4169 superalloy;multiaxial fatigue;fracture;crack initiation;crack propagation;
GH4169合金;多轴疲劳;断口;裂纹萌生;裂纹扩展;
3. Keywords GH4169 superalloy;high temperature;multiaxial low cyclic fatigue;non-proportional loading;life prediction;
GH4169合金;高温;多轴低周疲劳;相位差;寿命预测;
4. multiaxial joints
[医] 多轴关节, 杵臼关节
5. Study on a Robotic System for Multiaxial Bore Assembling
一种用于多轴孔装配的机器人系统研究
6. A NEW MULTIAXIAL FATIGUE MODEL TAKING INTO ACCOUNT THE INFLUENCE OF TENSILE DWELL TIME
一种考虑拉伸保持效应的多轴疲劳寿命模型
7. A multiaxial Low Cycle Fatigue Damage Parameter for Single Crystal Nickel-Based Superalloys
一种镍基单晶合金多轴低周疲劳损伤参量
8. Multiaxial fatigue life prediction methods are concentrated, in which critical-plane strain energy density criteria seem to be the most promising.
主要评述各种多轴疲劳寿命估算方法，其中临界面应变能密度法是较为有效的方法。
9. A method is outlined for making low cycle fatigue life prediction for engineering components subject to multiaxial loading.
介绍了一种预测受多轴交变载荷工程构件的低周疲劳寿命的方法。
10. The developments of multiaxial fabrics in the world are introduced.
介绍了多轴向技术在世界各国发展状况。
11. By means of selecting penny shaped crack model to simulate the defects in concrete,the damage model for concrete under multiaxial stress state was developed based on statistical fracture theory.
以圆盘裂纹模型模拟混凝土内部的缺陷,基于统计断裂理论推导出了多轴应力下混凝土的损伤统计模型,并根据应变等价假说,建立了包含损伤的混凝土的基本本构关系。
12. Elastoplastic Finite Element Analysis of Smoothing Specimen Under Multiaxial Cycle Loading
光滑薄壁管件的多轴循环弹塑性有限元分析
13. Experimental study on multiaxial characteristic of air-entraining concrete after freeze-thaw cycling is just in the initial stages.
冻融条件下引气混凝土的多轴力学性能研究,目前尚处于初步阶段。
14. Multiaxial fatigue behavior of superalloy GH4169 was investigated by using the thin tubular multiaxial fatigue specimens under proportional and non-proportional loadings at high temperature.
利用薄壁管拉扭疲劳试样,在高温控制应变循环加载下研究高温合金GH4169的多轴疲劳行为。
15. Keywords Single crystal material Orthotropy Multiaxial stress Asymmetrical cyclic load Low cycle fatigue;
单晶材料;正交各向异性;多轴应力;非对称循环载荷;低周疲劳;
16. Karl Mayer: optimization of the Malimo Multiaxial machine
卡尔·迈耶公司:马利莫多轴向编织机的优化
17. For the multiaxial proportional loading, the dispersion degree of fatigue cracks was low.
在多轴比例加载条件下，裂纹分布的分散性较小。
18. For multiaxial life prediction, the critical plane approach is better than that of others, however, the accuracy of life prediction is deeply influenced by the results of stress-strain analysis.
在多轴疲劳寿命预测的问题上临界平面法是一种比较好的方法，而影响临界平面法预测结果精确度的主要因素是所进行的应力应变分析。
19. The time-dependent ratcheting behavior of SS304 stainless steel was experimental studied at room temperature under non-proportionally multiaxial cyclic loading.
在室温下,对SS304不锈钢非比例多轴循环加载下的时相关棘轮行为进行了实验研究。
20. Based on experimental data and finite element analysis results, a low-cycle fatigue life model is proposed for the powder metallurgy superalloys under multiaxial stress states.
在详细分析试验和有限元计算结果的基础上，提出了复杂应力状态下的低周疲劳寿命模型。
21. Multiaxial Fatigue Damage Parameter for Fibre-Reinforced Composites Based on a Critical Plane Approach
基于临界平面法的复合材料多轴疲劳损伤参量研究
22. MULTIAXIAL FATIGUE LIFE PREDICTION FOR NOTCHED SPECIMENS BASED ON THE CRITICAL PLANE APPROACH
基于临界面法的缺口件多轴疲劳寿命预测
23. STRENGTH CRITERION FOR PLAIN CONCRETE UNDER MULTIAXIAL STRESS STATES BASED ON DAMAGE POISSON'S RATIO
基于损伤泊松比的混凝土多轴强度准则
24. Fracture Strength of Ceramics under Multiaxial Stress State
复杂应力作用下结构陶瓷材料的断裂强度
25. multiaxial stress
多向应力
26. Keywords Multiaxial;Fatigue;High temperature;Softening;Plasticity;Scanning electron microscopes;Creep;
多轴;疲劳;高温;软化;塑性;扫描电镜;蠕变;
27. Multiaxial spot film
多轴位点片
28. Study of Multiaxial Low - cyclic Fatigue Prediction Methods
多轴低周寿命预测方法研究
29. multiaxial low - cyclic fatigue
多轴低周疲劳
30. multiaxial joint
多轴关节, 杵臼关节
31. multiaxial electromechanical loading
多轴力电耦合
32. multiaxial compression strength
多轴压强度
33. multiaxial deformation
多轴变形
34. multiaxial tensile loads
多轴向拉伸载荷
35. multiaxial fabric
多轴向织物
36. STUDY OF COMPRESSION AFTER IMPACT ON MULTIAXIAL WRAP-KNIT/STITCHING COMPOSITES
多轴向经编/缝合织物增强复合材料冲击后压缩强度研究
37. multiaxial warp kntting machine
多轴向经编机
38. multiaxial warp-knitting reinforcement structure
多轴向经编针织增强结构
39. multiaxial stresses
多轴应力
40. multiaxial stress field
多轴应力场
41. multiaxial stress state
多轴应力状态
42. Approximate Calculation of Local Stress and Strain under Multiaxial Stress State
多轴应力状态下的局部应力应变近似计算方法及其应用
43. Estimation of Brittle Materials'Strength Under Multiaxial Stress State
多轴应力状态下脆性材料强度的估算
44. multiaxial intensity
多轴强度
45. multiaxial strength model
多轴强度模型
46. multiaxial strength
多轴强度预测
47. multiaxial nomenclature
多轴心命名法
48. multiaxial drawing
多轴拉伸
49. multiaxial jet-grouting impervious wall
多轴旋喷防渗墙
50. Multiaxial ratchetting
多轴棘轮
51. Keywords Multiaxial ratchetting;Ratchetting strain;Fatigue life prediction;
多轴棘轮;棘轮应变;疲劳寿命预测;
52. multiaxial proportional loading
多轴比例加载
53. eigenvalue equation of multiaxial strength parameter
多轴特征强度参数方程
54. multiaxial fatigue
多轴疲劳
55. Keywords multiaxial fatigue;cyclic hardening and softening;proportional loading;non-proportional loading;high temperature;
多轴疲劳;循环硬化与软化;比例加载;非比例加载;高温;
56. Keywords multiaxial fatigue;nonproportional loading;LY12CZ aluminum alloy;critical plane;fatigue damage criterion;damage accumulation;life prediction;
多轴疲劳;非比例加载;LY12CZ铝合金;临界面;破坏准则;损伤累积;寿命预测;
57. multiaxial fatigue criterion
多轴疲劳准则
58. multiaxial fatigue parameters
多轴疲劳参数
59. Multiaxial fatigue life prediction of fan disk using critical plane method
多轴疲劳理论在航空发动机零部件寿命预测中的应用
60. BEHAVIOR OF MULTIAXIAL FATIGUE CRACK PROPAGATION
多轴疲劳裂纹扩展行为研究
61. multiaxial assessment
多轴评估法
62. multiaxial system
多轴诊断系统
63. multiaxial loading
多轴载荷
64. Keywords Multiaxial random loading Fatigue fracture plane Critical plane approach Maximum shear strain plane Weight-averaged method Fatigue damage;
多轴随机载荷;疲劳断裂平面;临界平面法;最大切应变平面;权值平均法;疲劳损伤;
65. DETERMINATION OF THE FRACTURE PLANE UNDER MULTIAXIAL RANDOM LOADING
多轴随机载荷下断裂平面的确定方法
66. multiaxial non proportion simutaneity
多轴非比例加栽
67. A new proportional factor was introduce into the model in order to consider the effect of loading path shape on the multiaxial ratcheting.
定义了一个新的非比例因子,讨论了非比例加载路径对棘轮行为的影响。
68. Keywords Atlantoaxial fixation Multiaxial screw system Atlantoaxial instability;
寰枢椎固定;万向螺钉;寰枢椎不稳定;
69. Biaxial analysis was used to get the multiaxial information, and fatigue calculation of multiaxial crack initiation was conducted.
寿命预测采用多轴裂纹萌生疲劳分析，其中部件的多轴特性通过二轴分析获得。
70. Effects of Mean Strain on Multiaxial Cyclic Behaviour and Fatigue Life
平均应变对多轴循环特性及疲劳寿命的影响
71. Finally, the future directions in the research of multiaxial low cycle fatigue are suggested.
并建议今后多轴低周疲劳课题的研究方向。
72. Keywords stress field intensity approach;fatigue notch factor;fatigue loading type factor;fatigue size factor;multiaxial fatigue;fatigue limits;S-N curves;
应力场强法;疲劳缺口系数;疲劳尺寸系数;疲劳加载方式;多轴疲劳;疲劳极限;S-N曲线;
73. Keywords air-entraining concrete;freeze-thaw cycling;multiaxial strength;failure criterion;
引气混凝土;冻融循环;多轴强度;破坏准则;
74. The iterative formulas of elastoplastic stochastic finite element method (SFEM) under cyclic loading are deduced and the random responses of local multiaxial stress and strain are calculated.
推导了交变载荷下弹塑性随机有限元的迭代格式,计算了局部多轴应力应变的随机响应。
75. We provide multiaxial servo controlled system robot.
提供多轴伺服控制的机械手和机器人。
76. The advances in the research of fatigue-creep interaction were introduced, including the mechanisms of micro-crack initiation and growth and the development of multiaxial fatigue-creep test.
摘要介绍国内外疲劳-蠕变交互作用研究的一些进展，其中包括微观裂纹萌生及扩展机理的研究、高温多轴疲劳-蠕变实验的发展。
77. The test results of nonproportional low cycle fatigue under multiaxial loading of 316L stainless steel are used.The present multiaxial low cycle fatigue life prediction methods are discussed.
摘要利用对316L不锈钢多轴非比例加载低周疲劳的试验结果，对现有的多轴低周疲劳寿命估算方法进行讨论；
78. The fracture surfaces of multiaxial fatigue specimens under proportional and non-proportional multiaxial loadings were observed and analyzed by using a scan electron microscope.
摘要利用扫描电镜对多轴比例和非比例载下的疲劳试样的断口面和外表面进行扫描观测分析。
79. A multiaxial fatigue damage parameter for fibre-reinforced composite was presented based on critical plane approach and the multiaxial fatigue damage characteristics of composite were investigated.
摘要基于临界平面方法，提出一种用于纤维增强复合材料的多轴疲劳损伤参量，研究了复合材料多轴疲劳损伤特徵。
80. This paper introduced manufactures and applications of multiaxial fabric, FRP pipe and tank, FRTP (fiber reinforced thermoplastics) as well as composite Materials Institute of Universities in Germany and Spain.
摘要本文介绍了德国、西班牙多轴向织物、玻璃钢管道与贮罐，热塑性纤维增强塑料的制造和使用，以及大学复合材料研究所的情况。
