nc

nc

1. Berkowitz, Marvin W. (2005) Parenting for Good, Chapel Hill, NC: Character Development Group Inc.

聯合國教科文組織（2007）。正面管教法接納、友善學習的教室。台北：人本教育基金會。

2. Ken Charles Barger, 47, accidentally shot himself to death in December, 2004 in Newton, NC.

2004年12月，在北卡罗来纳州纽顿市，47岁的肯·查尔斯·巴格意外地开枪自杀身亡。

3. Among 56 pulmonary metastases in 20 patients, 32 obtained CR, 19 PR, 5 NC.

20例56个病灶,完全缓解(CR)32个; 部分缓解(PR) 19个;

4. The overall response rate was 60.87% including CR 3 cases and PR 11 cases,NC 5 cases,PD 4 cases. MST is 5.5 months.

23例患者近期治疗总有效率为60.87%,其中完全缓解(CR)3例,部分缓解(PR)11例,稳定(NC)5例,无效(PD)4例,中位生存时间(MST)为5.5月。

5. Observation of NC in 49 workers occupationally exposed to AAM.

49例丙烯酰胺作业工人神经传导观察

6. BN group received BN52021(5 mg/kg),while NC group received only abdominal incision.

BN组以BN52021(5 mg/kg)代替生理盐水静注; NC组仅做剖腹术。

7. The incidence rate of LUF in group CC and group HMG were significantly higher than in NC.

CC ,HMG组LUF发生率显著高于NC组 ;

8. Application of CL Formula in CAM Software for NC Machining.

CL公式在数控线切割机床CAM系统中的应用

9. Development of Multi-Function DNC Interface for FANUC-7M NC System ...........

FANUC-7M数控系统多功能DNC接口的开发

10. The workers in the FMS are usually highly skilled and trained in NC and CNC.

FMS系统的工人通常都是经过数控和计算机数控培训的高技术人员。

11. The Vs and 6-site average Vs(AVs) in microalbuminuria group were lower than the NC(P<0.01).

MAU组左室六个室壁Vs、AVs较NC组降低(P<0.01)。

12. What is driving the NC is the attraction of a client-server architecture with thin clients.

NC的驱动力是采用瘦客户机的客户机/服务器体系结构。

13. NDC shop floor control, the main function is to achieve NC program transmission and lathe management.

NDC车间控制，主要功能是实现数控程序的传输和车床的管理。

14. SPST voltage free contacts programmable as NO or NC.

SPST自由接触可编程电压没有或数控。

15. VMR and pulsate index(PI) were significantly (P<0.001) different in VCI subjects as compared with NC subjects.

VCI组与NC组VMR和PI之间的比较有显著性差异(P<0.001)。

16. Shanghai Baichao NC Laser Equipment Co., Ltd.

上海百超数控激光设备有限公司。

17. Tree deletions starting at an object which has an NC head as a descendant are not allowed.

不允许在将 NC 头作为子体的对象开始删除目录树。

18. Do not use compressed air to clean (the) machines, (the) electrical cabinets and (the) NC units.

不允许采用压缩空气清洗机床、电气柜及NC单元。

19. Dongguan South NC Machine Tool Co., Ltd.

东莞市南方数控机床有限公司。

20. To design NC grinding machine,the sharpening key technology for new micro-drill point is researched.

为了设计新型微钻头数控刃磨机床,对新型微钻头刃磨的关键技术进行研究。

21. A modular and open control system was proposed for the modular and reconfigurable characterized NC workbench.

为使数控工作台具有模块化、可重组的特点，对其控制系统也提出了模块化、开放式的要求。

22. A system of automated NC camshaft grinding machine with moderate price and high capability was developed.

为此,开发了一套价格适中的高性能数控凸轮磨床控制系统。

23. In this paper, Siemens post processing program is developed in Post-builder so as to create NC program.

为生成NC程序,本文在Post-builder中开发了siemens后置处理程序。

24. Web site catalog with greenhouse sales both wholesale and retail in Pisgah Forest, NC.

产品目录: Phalaenopsis, Cattleya, Oncidium, Paphiopedilum, Phragmipedium, Miltoniopsis and others shipped to US address.

25. It introduces a new type of NC dresser with three NC axes (two moving axes and a circumrotating axis) ganged function.

介绍一种新型的数控磨床砂轮修整器,它具有2移动轴+1转动轴的三轴联动功能,因此能精确修整各种曲面的砂轮;

26. This article introduces the design and work principle of NC back spotfacer.

介绍了一种数控反锪刀具的设计及其工作原理。

27. This subject introduce a kind of auto-reversible tap holder which used in NC machines.

介绍了一种自动可逆式攻丝夹头在数控机床上的应用。

28. This paper introduces three methods of NC practice to training students in NC lathe operation.

介绍了三种数控实习方法,训练学生对数控车床的操作.

29. In this paper a new strategy and algorithm of non-circular surface NC grinding based on ACIS studied.

介绍了处理基于ACIS实体造型的任意非圆曲面内圆磨削的新策略和新算法。

30. The paper introduces the design of the software and hardware of the opening NC system for the parallel machine tool.

介绍了并联机床开放式数控系统的软件、硬件设计。

31. Application and development of NC machine tool fault diagnosis technique were introduced.

介绍了数控机床故障诊断技术的应用与发展。

32. It introduces the principle of graphite electrode abrading tool and develops the software and hardware of NC machine.

介绍了石墨电极研磨成形机的原理和数控软、硬件系统的研制开发；

33. This paper describes the development of VMT (Virtual NC Machine Tool) and its functions in the virtual manufacturing.

介绍了虚拟数控机床(VMT)的发展趋势以及在虚拟制造中的作用。

34. It is introduced about the realization of NC WEDM autoprogramming in plastic injection molding CAD/CAM system.

介绍注塑模CAD／CAM系统中实现数控线切割自动编程的方法。

35. The beauty of the NC, they say, is that it addresses the headaches associated with owning and managing a PC.

他们说，nc的长处是它解决了与拥有和管理PC机有关的令人头痛的问题。

36. Application of NC programming in injection mould manufacturing is explained by the example.

以实例说明了数控编程在注塑模具制造中的应用。

37. AME and AMEn of QPM were higher than those of NC (P>0.1).

优质蛋白玉米和普通玉米的真代谢能(TME)和氮校正真代谢能(TMEn)值接近(P>0.1),分别为16.29MJ·kg-1和16.30MJ·kg-1;

38. Handle NCR report to make sure the NC parts were disposed timely and correctly.

作为质量部门的代表参与项目管理团队并能及时地完成质量部门应承担的工作。

39. You may have to pay for the beer you drink, depending on the NC and your relationship with the taipan.

你或者会被要求比啤酒钱,当然视乎你同间夜总会同大班既关系喇.

40. BOg NC / E@H keps my CPU at 100%. Is there hany way to throttle it?

使我的CPU占用率达到100%。有什么方法阻止它吗？

41. MCS-51 is used as CPU of NC system, and LCD as display device.

使用 MCS- 5 1单片机作为数控系统的中央处理器 ,采用先进的 LCD液晶显示器作为数控系统的显示屏 .

42. Key works: mould design; 3D design; mould making; CNC Machine; NC code.

关键词：模具设计；3D实体设计；模具制造；数控机床；NC代码。

43. There was a very singificant difference in left atrium and ventricle size between PPCM and NC (P<0.001).

其中，右心房扩大6例，右心室扩大8例，全心脏扩大4例，占20%。

44. Hole-punching machines, spotwelding machines, and assembly machines also use point-to-point NC systems.

冲孔机、点焊机及装配机也采用点位数控系统。

45. Nanjing KMD NC Machine Tool Manufacture Co.

南京肯迈得机床制造有限公司是从事数控机床制造、数控系统研发和生产的机电一体化企业。

46. Cancel the ticket for flight NC 310 and book one seat on Flight NA 317 to Beijing.

取消NC310航班的机票，订一张NA317航班去北京的机票。

47. It can be widely applied to all computer, NC.

可普及搁置于一切微机，数控。

48. Hello. This is Zhongping Wu of NC Industries.

喂!我是nc 工业的吴中平。

49. With the help of the CADWIND software, we are programming NC winding for non-polar conical vessel.

在CADWIND软件的帮助下,进行不等开口锥形壳体的数控缠绕编程工作。

50. Today the government purchases big environment in, we saw dramatic change however, NC is in China renascence.

在今天政府采购大环境之中,我们却看到了戏剧性的变化,NC 在中国重生。

51. Traditionally, NC programming has been performed offline with the machine commands being contained on a punched tape.

在传统上,NC编写程序在一个穿孔纸带上所包含的机器命令已可脱机执行。

52. In the post processing part, the NC codes is generated through exchanging the variables in the code template.

在后置处理部分，本文采用替换代码模板中变量的方式实现代码生成。

53. Research on Communication System of NC Machine Tool Based on Ethernet.

基于以太网的数控机床通信系统研究。

54. NEA Couldpromote root growth of nc wheat, soybean and sugarbeet at seedling stage.

壮根素系列产品能明显促进水稻、小麦、大豆和甜菜苗期根系发育，促进作物产量提高。

55. Tianjing NC Machine Tool Complement Co., Ltd.

天津市数控机床配套有限公司。

56. TIANJIN ZEER NC MACHINE TOOL COMPONENT CO., LTD.

天津市泽尔数控机床成套有限公司。

57. An NC Gift Box is a free virtual item you can use to gift a Neocash item from your Inventory to another Neopets user.

如果你对此有建议，这里并不能帮你解决你所遇到的问题，又或是你想要汇报有关状况，请点击这里。

58. NINGBO DEWEI NC MACHINE TOOL CO., LTD.

宁波德威数控机床有限公司。

59. The positioning bidirectional pitch compensation method is applied in NC system.

定点式双向螺距补偿法应用在数控系统中。

60. The NC GaN has a uniform size distribution and spherical shape.

实验发现气凝法生成的氮化镓奈米微粒以均匀的圆球形分布。

61. The experiments show that this system meets the requirements of a uniaxial or biaxial modular NC workbench.

实验表明，该控制系统适合于单、双轴数控工作台的模块化控制要求。

62. Manage file of NC system and offer NC code file to download for NC.

对数控系统文件进行管理以及为数控系统提供NC代码文件下载服务。

63. The die of NC tube bending is composed of bending die,clamp die,wiper die,pressure die and mandril.

导管数控弯曲模具包括弯曲模、夹模、压模、防皱模和芯棒。

64. The infirm ability to develop domestic market for NC machine tool is the important reason of lower market occupancy.

市场营销能力不强是国产数控机床市场占有率偏低的一个重要原因。

65. Then, the function of resuming of NC program is amended and amplified,and it can be used well in the workshop.

并在此基础上,对“程序再开”功能做了修正和完善,使该技术能真正的应用于现场。

66. Then, the function of resuming of NC program is amended and amplified, and it can be used well in the workshop.

并在此基础上，对“程序再开”功能做了修正和完善，使该技术能真正的应用于现场。

67. Parallel machine tool is an important developing aspect of NC structure.

并联机床是数控机床机构进化的一个重要方面。

68. Based on the string attrib in ACIS, A module of regeneration the wire path and NC code is developed.

开发了工艺参数或几何模型变化后轨迹和数控代码文件自动更新模块,可提高自动编程的效率。

69. As computer technology improved, NC underwent one of the most rapid changes known in history.

当计算机技术较成熟后,数字计算机控制技术经历了历史上最快的一个发展时期。

70. Do you know about the NC (Non-Commercial) element in CC licenses?

您是否了解CC许可协议中的“非商业性使用”许可要素?

71. I'm sales manager of NC Industries.

我是nc 工业的业务经理。

72. Views of my yard near Greenville NC USA, or possibly me working in my shop.

我的院子的风景，在美国北卡罗来纳州格林维尔附近；也可能看到我工作在我的店里。

73. Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管小弯曲半径数控弯曲成形容易出现的成形缺陷之一。

74. Statistic Analysis (SAS,SAS institute, Cary, NC, USA) was used.

所用统计软件为statist1CAnalysissystem第6版(SASInsititute，Cary，NC，USA)。

75. From our perspective, the NC doesn't make the PC obsolete.

按我们的想法，NC不会使PC过时。

76. The controlling system is clustered opening NC system based on IPC.And it has good and secure layout.

控制系统选用基于IPC的模块式开放数控系统,系统界面友好,安全性强。

77. A design plan of Multichannel Infrared Signal's Sy nc hronous Detecting is presented.

提出一种对多路红外脉冲信号进行同步采集的设计方案并给予工程实现;

78. Introduced a new method of modular design about automatic program system of NC punching machine.

提出了一种新型的数控冲床自动编程系统的模块化设计方法。

79. NC mechanism of rocking rule is the core of a MJB3212 semiautomatic woodwork sawing machine.

摇尺数控是MJB3212型半自动跑车木工带锯机的核心装置。

80. The teaching and playback process of NC welding positioner was executed as foll.

摘要:叙述了数控焊接变位机示教再现控制系统的实现过程。