oxyacetylene
oxyacetylene
1. The enterprise of SIEG BLITZ EK offers you Cutting systems, Welding systems and Other as well as the further Oxyacetylene process and Dismantling machine tools.
SIEG BLITZ EK是一家现代化的、可靠的产品供应商，这家供应商从事切割系统,焊接系统,气焊,其它,拆除的机床的制造、销售。请您访问我们的主页，垂询当前的产品系列和服务。
2. Liu Xi.Analysis of Binding Strength of Spray Weld Coating Influenced by Technological Parameter of Oxyacetylene Spraying[J].China Mechanical Engineering,1996,7(3):96-98.
[9]刘曦.氧乙炔火焰喷焊工艺,参数对喷焊层结合强度影响的分析[J].中国机械工程,1996,7(3):96-98.
3. The remaining 20%of the acetylene production is principally used for oxyacetylene cutting, heat treating, and welding.
乙炔生产的剩余20%主要用于氧乙炔切割、热处理和焊接。
4. The method and technology of oxyacetylene flame braze welding for main cable wrapping at Shantou Bay Bridge were introduced,and the difficulties of the welding were analyzed.
介绍汕头海湾大桥主缆缠丝所采用的氧-乙炔火焰钎接焊方法及其工艺，并对主缆缠丝焊接的难点进行了分析。
5. he cheated and bought some commemorative coins, melting them with an oxyacetylene torch.
他以哄骗加购买的方式，得到了几枚纪念币，用一支氧乙炔焊炬把它们熔化。
6. By means of oxyacetylene flame spraying and selection of different coating , surface adhesion factor of automobile drum type machine are improved, thus resulting in the maximum efficiency of vehicle drive moment.
以氧乙炔火焰喷涂工艺与选择喷涂层为手段,着力于提高汽车试验台转鼓表面附着系数,以获取汽车驱动力矩最大效能。
7. single oxyacetylene welding goggles
单玻璃焊工护目镜
8. As indicated as the diagram, no combustion produces even using oxyacetylene flamethrower for the coating, while combustion produces in the case of emulsion-type paint.
又因它不含化学溶剂，所以是绝对安全的，如上图所示，用氧炔喷火器对准矿物涂料，也不会燃烧，而乳胶则不同。
9. double oxyacetylene welding goggles
双玻璃氧乙炔焊工护目镜
10. It has been shown that the fine and spheroidal graphite is favourable to the oxyacetylene cutting perfomance.
发现，愈是细小、圆整石墨形态愈有利于气割。
11. Keywords composite;thermal analysis;oxyacetylene ablation;correlation;linear regression;
复合材料;热分析;氧乙炔烧蚀;相关性;线性回归;
12. Perfect.You and sheldon go to the junkyard and pick up 6 square meters of scrap aluminum?Raj and i will get the oxyacetylene torch.
完美,你和谢尔顿去废物堆积场找个6平方的铝合板,我和拉杰搞定氧乙炔喷焊器.
13. The result of practice indicated that its servicelife after intensifying with oxyacetylene spray welding was more than double of the new one intensifying with plasma spraying.
实际使用结果表明：排粉风机叶轮经修复和氧乙炔喷焊强化后，其使用寿命比原等离子喷涂强化的新叶轮提高1倍以上。
14. 4.The multiwavelength pyrometer with prisms for beam split has been used to measure the true temperature of ablative materials burnt by oxyacetylene flame.
应用棱镜分光式多波长光电高温计对氧乙炔焰烧蚀材料的真实温度进行了测量。
15. This article expounds Al coatint technology and parameter chosce by analysing the oxyacetylene heat Al coating of iron frying Pan.
提出了氧乙炔焰铝丝喷涂普碳钢灼勺工艺及适宜喷涂参数。
16. Application of Small Sized Digital Controlled Oxyacetylene Rail Welding Machine in Engineering of Rail Welding
数控小型气压焊轨机在焊轨工程中的应用
17. Repair of the oxyacetylene welding of the crank anxle
曲轴的氧乙炔焰喷焊修复
18. The preferred method is by oxyacetylene flame.
最好采用氧炔焰加热方法。
19. oxyacetylene welding equipment
气焊设备
20. oxyacetylene scarfine machine
氧(乙)炔火焰清理机
21. oxyacetylene flame put in fluxing compound spray mehed
氧-乙炊焰加熔剂喷熔
22. oxyacetylene welding surfacing
氧-乙炔火焰堆焊
23. oxyacetylene flame put in fluxing compound spray melted
氧-乙炔焰加熔剂喷熔
24. Although the total calorific value of oxypropane flame is higher than oxyacetylene flame, its first calorific value is lower, so its burning temperature is lower and its heating time is longer.
氧丙烷焰比氧乙炔焰的总热值高,但一次热值低,因此燃烧温度低,预热时间较长。
25. Although the total calorific value of oxypropane flame is higher than that of oxyacetylene flame, its first calorific value is lower,so its burning temperature is lower and its heating time is longer.
氧丙烷焰比氧乙炔焰的总热值高，但一次热值低，因此燃烧温度低，预热时间较长。
26. oxyacetylene cutter
氧乙炔切割器
27. oxyacetylene cutting machine
氧乙炔切割机
28. oxyacetylene pipe cutter
氧乙炔割管机
29. oxyacetylene treatment
氧乙炔处理
30. oxyacetylene rod gun
氧乙炔棒枪
31. oxyacetylene welding outfit
氧乙炔气焊机
32. an oxyacetylene torch; oxyacetelyne welding.
氧乙炔火炬；氧乙炔焊接。
33. Keywords Oxyacetylene spray weld;Self-melt alloy;Coat design;
氧乙炔火焰喷焊;自熔性合金;涂层设计;
34. An oxyacetylene torch.
氧乙炔炬
35. oxyacetylene flame
氧乙炔焰
36. oxyacetylene cutting
氧乙炔焰切割
37. oxyacetylene powder gun
氧乙炔粉体枪
38. oxyacetylene cutting torch
氧快切割机
39. oxyacetylene cutting method
氧炔切割法
40. oxyacetylene scarfing
氧炔火焰清理
41. oxyacetylene scarfing machine
氧炔火焰清理机
42. oxyacetylene flame hardening
氧炔火焰硬化法
43. oxyacetylene weld
氧炔焊 气焊
44. oxyacetylene welding
氧炔焊 氧乙炔焊
45. oxyacetylene blowpipe
氧炔焊吹管
46. oxyacetylene welder
氧炔焊接机
47. oxyacetylene burner
氧炔焊炬
48. The flame use oxyacetylene or other burnt gases, for this method, the equipment is simple, the operation is easy, but the difficulty is large.
火焰采用氧?乙炔火焰或其它可燃气体火焰，这种方法设备简单，操作容易，但难度较大。
49. Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
热绝缘材料的氧乙炔烧蚀试验方法
50. Composite materials guide can be gotten by strengthening carbon steel guide with oxyacetylene hot spray welding. Replacing high carbon alloy guide with it has a good result.
用氧化乙炔焰热喷焊技术对普碳钢导卫装置进行表面强化，制成复合材导卫以替代高碳高合金导卫，取得较好效果。
51. Cutting: Oxyacetylene cut off the castings from gate stick.
用氧气-乙炔焰从浇棒上切下铸件。
52. Cut off metal products by oxyacetylene blowpipe
用氧炔吹管的火焰来切割金属
53. Keywords computer oxyacetylene ablation rate;
计算机;氧-乙炔;透烧率;
54. The influence of flake and spheroidal graphite on oxyacetylene cutting charicteristic of cast iron has been analysed.
讨论了石墨的物理性能，分析了片状和球状石墨聚集状态对铸铁气割性的影响。
55. Exploration for the Treatment Technology of Welding Rails Normalizing Thereafter by Oxyacetylene Pressure Welding
钢轨气压焊焊后正火处理工艺的探讨
56. Oxyacetylene pressure welding method of long rail
长轨气压焊方法
57. Keywords ceramics;coating;ceramic with heat resistance;gradient coating;oxyacetylene flame;
陶瓷;涂层;热障陶瓷;梯度涂层;热喷涂;
