parametrical
parametrical
1. Parametrical variational principle and its application to a class of ferro-electric models
一类铁电模型的参变量变分原理及其应用
2. optical parametrical oscillator (OPO)
光参变振荡
3. Approximated Solution of the Coupling Equations of Optical Parametrical Amplification
光参量放大耦合方程的近似解
4. parametrical variational principle
参变量变分原理
5. parametrical optimization
参数优化
6. parametrical analysis
参数分析
7. Parametrical design
参数化设计
8. The Parametrical Equalizer gives you the possibility with highest precision adjust the soundcharacter.
参数均衡器使您能够最精确地调整音响属性。
9. Parametrical excitation
参数激励
10. parametrical nonlinearity
参数非线性
11. parametrical face
参数面
12. Complete Synchronization and Phase Synchronization of Two Uncoupled Neurons Through Parametrical Drive
参数驱动实现两个非耦合神经元完全同步与相位同步
13. PARAMETRICAL STUDY ON FIRE-RESISTANT CAPACITY OF HYPERBOLIC PARABOLOID CABLE STRUCTURES
双曲索网结构抗火极限承载力影响因素分析
14. In addition, an integrated parametrical program is developed for establishing the seat model, analyzing the motion trajectory, and finding the service loads under any motion position.
另外，本文发展一套整合型参数化程式，可以建立座椅模型、进行运动轨迹分析，并根据运动轨迹分析之结果进行运动过程之静态力分析，掌握运动过程各零件负荷情形。
15. This finding was consistent with practical observations, which confirmed that the grey system analysis provides a better method for parametrical analysis of yarn uneven in weight.
同时证明了灰关联分析是棉纤维原料品质与成纱重量不匀率因素分析的较佳方法。
16. The paramet rization of the archetypal drawing and the DCL interface are depicted with AutoL ISP.
在DCL界面利用标准结构的三维实体模型实现图形库的可视化，原型图的参数化引入了特征参数。
17. In the following chapters, we studied the method of building the parametrical model and the FEM analyzing.Then we complete the size optimization job in order to lighten the bogie.
在此基础上完成了以轻量化为目标的转向架结构尺寸优化,对优化的结果进行了静力学分析,并与理论分析的结果相互验证,得到了有实际应用价值的结论。
18. Parametrical Design of Modular Fixture Components Based on ACIS
基于ACIS平台的组合夹具元件库的参数化设计
19. Also a wide-band and gain-stable PMT Preamplifier has been designed and fabricated according to the paramet...
实验结果表明该电路在提供信号增益的同时能有效的削弱高频噪声,提高激光雷达的信噪比。
20. The influence of age,sex,race,refractive error and optic disc paramet ers on the sensitivity and specificity of scanning laser polarimetry
年龄、性别、种族、屈光不正和视盘参数对激光扫描偏振检查敏感性和特异性的影响
21. existence conditions of solutions to output asymptotic tracking in descriptor second-order dynamical systems;completely parametrical forms of all the controller gains.
广义二阶动力学系统基于输出及其微分反馈的输出渐近跟踪控制律存在的充分条件以及该控制律增益阵的完全参数化表达式。
22. Keywords bottom-hole assembly;tumbler deviation-controlled drilling tool;parametrical design;
底部钻具组合;不倒翁式偏心防斜钻具;参数设计;
23. Research on parametrical design technology for architecture mental structure products and software designed
建筑金属结构产品参数化设计技术研究及其应用
24. Numerical analyses of the allowed parametrical errors in tunable OPO[J].
引用该论文 彭玲,任钢,黄伟,熊胜明,蔡邦维.
25. The Characteristics of Optical Parametrical Oscillator in Periodically Poled KTiOPO4 Crystal[J].
引用该论文 桑梅,薛挺,于建,倪文俊,于云翔,李世忱.
26. Low-threshold and Wide Tunable PPLN Optical Parametrical Oscillator[J].
引用该论文 梁晓燕,侯玮,吕军华,许祖彦.
27. Recent Progress of Fiber Optical Parametrical Amplifier[J].
引用该论文 陈婉,董淑福,赵宇波,刘红军,周俊.
28. arc-length parametrical curves
弧长参数曲线
29. Keywords arc teeth wimble gear;mapping;confirming of main paramet;
弧齿锥齿轮;测绘;主要参数确定;
30. strong parametrical excitation
强参数激励
31. Extended A/D translation circuit and sample circuit of welding paramet er are employed to realize the date acquisition of arc voltage and welding curre nt in the welding process.
控制器外扩A/D转换电路、焊接参数采样电路,在焊接过程中对电弧电压及焊接电流进行数据采集处理。
32. Abstract： The parametrical resonance and stability in a rotating shaft with an asymmetrical stiffness is analyzed.
摘 要： 研究非对称刚度转轴的参激共振和分叉。
33. Based on Taguchi method and uniform design method, the three-dimensional numerical parametrical study of offset strip fins was conducted at low Reynolds number.
摘要基于田口方法，结合均匀设计法对低雷诺数工况下错列锯齿型翅片进行三维参数化数值研究。
34. This paper proposed a new type of feature extraction arithmetic for texture image, based on parametrical log polar translation.This arithmetic is robust to geometric distortions.
摘要提出一种细化参数的对数极坐标变换图像纹理特征提取算法，可以有效地消除旋转、缩放和平移等几何形变的影响。
35. This paper is mainly discussing the basic principle and implementation method of the 2D layout part of a STEP based parametrical feature modeling system.
本课题主要研究基于STEP标准的参数化特征造型系统中工程图纸的布 局及图形处理的基本原理及实现方法。
36. Keywords ACIS;ODBC;modular fixture;parametrical design;
组合夹具;参数化设计;
37. The results show that the coating film with flat,smooth and excellent performance can be obtained under the condition of appropriate electrophoretic paramet...
结果表明,在适宜的电泳工艺参数下,可以得到外观光滑平整,综合性能优良的漆膜。
38. spin phonon parametrical
自旋-声子参量
39. Keywords virtual NC system;virtual machine tools;3D modeling;parametrical;cutter database;
虚拟数控系统;虚拟机床;三维造型;参数化;刀具库;
40. This finding is consistent with practical observations and shows that the grey system analysis provides a better method for parametrical analysis of ramie yarn quality.
证明灰关联分析是苎麻纤维原料品质与成纱品质指标因素分析的较佳方法。
41. The findings are consistent with practical observations, indicating that the gray system analysis is an effective method for parametrical analysis of yarn strength.
这一规律与传统生产实践中人们的认知感相同，证明灰关联分析是棉纤维原料品质与成纱单纱强力因素分析的较佳方法。
42. parametrical 3D model
金属橡胶（Metal
43. non parametrical
非参数的
44. Determination of Hydrographical and Geological Paramet ers for Car-dumper Shed of Phase One Project of Huanghua Port
黄骅港一期工程翻车机房水文地质参数的确定
