pid

pid

1. PId and PI ITAE tunning complete source code can be used directly.

(译)：PID控制和PI ITAE整完整的源代码可以直接使用。

2. The technologic PID control is more general, it is applied in many fields now.

PID控制是一种应用很普遍的控制技术，目前在很多方面都有广泛的应用。

3. That PID is adjusted is that general closed cycle navar is so useful as to adjust method comparatively muchly.

PID调节是一般闭环控制系统中用得较多的调节方法。

4. She was featured in Aof Pongsak's latest Music Video called Pid Tung Song Kon and Tur Mai.

Ploy 通常出演配角, 但现在她也出演主角. 她有一个妹妹Sinitha Boonyasak.

5. Be sure to write down the exact account name and PID, including whether letters are uppercase or lowercase, and keep them in a secure place.

一定要记下正确的帐户名和 pid，包括字母的大小写，并将其放到安全的地方。

6. Research and Application on a Coalesce Intelligent PID Controller.

一种融合型智能PID控制器的研究与应用。

7. The above snippet of Java code sets up a query to retrieve the PID of an item.

上面的Java代码片段建立了一个查询来检索条目的PID。

8. Comparing with the conventional PID control, the NMPC strategy can improve greatly the control performance and save energy to reduce its consumption.

与常规PID控制结果比较表明，非线性模型预测控制在控制性能上有了较大改善并起到了节能降耗的作用。

9. Based on the traditional PID controller,the self-adjusting of PID parameter of the new type of controller was realized through fuzzy reasoning,acc...

与现有控制算法相比,该算法简单、实时性强、调节效果好,从而具有较好的工程应用前景。

10. The (disturbance) PID controller has perfect performances in the homopolar magnetic suspension system.

为了设计磁悬浮系统的单磁体控制器,必须建立系统的状态空间模型。

11. An improved PSO algorithm was presented and applied to optimal the PID parameters of electromotor.

为此,提出一种改进的PSO优化算法,并将该算法应用于电机控制系统的PID参数优化设计。

12. PID controller is designed by using Taguchi techniques to reduce the noises which influence the output of the piezoresistive sensor.

于本研究中我们使用田口方法来设计一PID控制器以降低杂讯对压阻感测器的影响。

13. Development of a RF ablation therapeutic instrument based on improved PID algorithm is introduced.

介绍了一种基于改进PID算法的射频消融治疗仪的研制。

14. The development of usual selective GC detectors is discussed,including FID,ECD,PID,FPD,etc.

介绍了几种常用的选择性气相色谱检测器的进展 ,包括FID、ECD、PID、FPD、NPD等等

15. A power system model with SMES unit and the design of nonlinear PID controller are introduced.

介绍了含SMES的电力系统模型及非线性PID控制器的设计。

16. The application of thermostatic control module based on PID in opacimeter was introduced.

介绍了基于PID算法的恒温控制模块在不透光烟度计中的应用。

17. Use the FPGA technique to abstract and filter PID is TS stream.

介绍了对TS流的PID进行提取和过滤的方法，并用FPGA予以实现。

18. A digital low-puss filter and a digital PID close-looped controller for load/pressure control is designed.

介绍了测控软件中的滤波算法和控制算法,设计了数字低通滤波器和负载闭环控制的PID控制器。

19. A digital magnetic levitating bearing control system based on TMS320LF2407A is designed, and multiple-parameter PID algorithm is applied.

以TMS320LF2407A为核心设计了磁悬浮轴承数字控制系统，并应用了变参数PID控制算法。

20. Control theory application, such as PID control, digital control redesign, neural and fuzzy control, optimal and robust control.

以上之基础皆运用在控制系统的应用以及设计上。

21. A new designing method for the optimal PID controller with incomplete derivation is proposed based on ant system and ant algorithm.

以蚁群系统和蚁群算法为基础,提出了一种新的具有不完全微分的最优PID控制器的设计方法。

22. The optimized PID controller has rapid response and low overshoot, and can effectively improve the dynamic performance for the servo system.

优化得到的PID控制器速度响应快、超调量小，有效地提高了伺服系统的动态性能。

23. It depended on accurate mathematical model of controlled object to fix on traditional PID adjustor.

传统的PID调节器整定要依赖于被控对象的精确的数学模型。

24. In the early of 1980s, automation instruments controlled the web-strip hot furnace popularly, whose controller is analogy PID adjuster.

八十年代前期，网带式加热炉大多采用自动化仪表控制，控制器采用模拟的PID调节器，产品的质量很难达到工艺要求，合格率不高；

25. It is better than PID controller and general fuzzy controller,so it can satisfy the request of very high contour tracking precision,position prec...

其性能优于PID控制器和常规的模糊控制器,能更好地满足超精密机床数控系统极高的轮廓跟踪精度、定位精度和抗干扰性能的要求。

26. The features of PID algorithm are analyzed and FPGA is chosen to implement a digital PID controller.

分析了PID控制算法的特点,引入FPGA来实现数字PID控制器。

27. The strategy of parameter fuzzy automatic adjustive PID is analysed.

分析了参数模糊自整定PID的原理。

28. The dynamic and static performance are both better than traditional PID control and fuzzy control.

动静态性能均优于传统的PID控制和模糊控制。

29. It is proved that the disturbance velocity, acceleration of position is eliminated through internal feedback of PID form.

原理分析证明，采用类似于PID形式的内部反馈，可消除舵机运动的速度和加速度干扰。

30. Also appearing on the product label is a product number (PN) and product ID (PID).

另外,产品标签上还显示产品ID(PID)。

31. The PID can be found in the About dialog box, accessed on the Help menu.

可以访问“帮助”菜单上的“关于”对话框找到PID。

32. Thermal meter adopt PID control and SCR output.

可连接多种功能之附属设备.

33. Any other features in Delta PLC which is suitable for process control which requires extensive calculations, PID, logging in data values, alarms etc.

台达plc特色中，其他适合作程序控制需求额外演算、ID、料值记录、常等?

34. Adopted MCU and PID control achieve precise and steady temperature.

同时采用MCU及PID控制,温度更精确,更稳定。

35. The experimental Research was done about the predictive PID control of high pressure reduction with expander pneumatic system.

因此高压气动动力系统需要采用减压节能效果更好的容积膨胀减压控制方式[1,2]。

36. A new parameters adaptive PID control algorithm is put forward on the basis of Cohen Coon assignment formula.

在Cohe Coon整定公式的基础上 ,提出了一种参数自适应PID控制算法 .

37. At the PID level, streams can be reordered and combined back into another MPTS.This process is referred to as remultiplexing.

在PID级上，数据流可以重新定次序，再合并到另一个MPTS中，这个过程被看作重新多路复用。

38. Based on the position PID algorithm and numeric compensation, the non linearity and synchronization have been solved.

在位置PID算法的基础中加入数字补偿的控制方案。

39. PID control based on iterative control compensation is used in position control part.

在位置控制部分,采用了基于重复控制补偿的PID控制方法。

40. DOC-2 has a phosphotyrosine interactingdomain (PID) on in its N-terminus and multiple proline-rich SH3 binding motifs in its C- terminus.

在其氨基端含有磷酸酪氨酸作用结构域(phosphotyrosine interactingdomain，PID/PTB domain)，羧基端含有多个富含脯氨酸的SH3结合区。

41. In the case, the traditional PID control, which is based on linear, is often hard to obtain the optimal control effect.

在这种情况下，传统的基于线性化的PID控制往往难以获得最佳的控制效果。

42. Based on ITAE guideline,three parameters of PID controller are optimized by using simplex method.

基于ITAE准则,采用单纯形法对液粘传动PID调节器三个参数进行寻优设计,通过优化使系统性能达到最优。

43. The complete set of robust PID controller parameters is determined by the edge theorem extended to time-delay systems.

基于推广到时滞系统的棱边定理,确定所有鲁棒PID控制器参数集.

44. Self-tuning of PID Parameters Based on An Improved Ge.

基于改进遗传算法的PID参数整定。

45. Fuzzy predictive PID controller based on output-error.

基于输出误差预测的模糊预测PID控制及应用。

46. It effectively completes the control and Constance of temperature through the improved PID algorithm, and the instrument miniaturization.

处理等,保持温度的恒定. 并实现仪器的小型化 和嵌入式系统的核心控制作用。

47. The outer-loop was controlled by the best ITAE setting formulae PID.

外环采用基于ITAE最佳设定公式PID来控制。

48. How to write the PID applications?

如何写PID的应用?

49. If you ever have to re-create the account, you must supply the same name and PID entries.

如果不得不重新创建帐户，必须提供这个帐户名和 pid 项。

50. If a proper RC feedback network is added to a schmitt trigger, we can get a two position (on-off) automatic controller with PID action.

如果在斯密脱触发器上加上一个适当的RC反馈电路,就能得到一个两位式(开关动作)PID调节器。

51. Compared with conventional PID controller, it has obvious andvantages.

它与一般常规的pid控制器相比有着明显的优越性。

52. The results of experiments show that AC servo system based on fuzzy PID control has quick response speed, high steady accuracy and good robustness.

实验结果表明,基于模糊PID控制的交流伺服系统具有响应速度快、稳态精度高和鲁棒性强等特点。

53. Then its weight is used to adjust PID controller parameter con...

实验结果表明了该方法的有效性。

54. The experimental results demonstrate that the proposed FLC presents a better performance than the conventional PID controller.

实验结果表明本文提出的模糊控制器相比与PI控制器具有更好的特性表现。

55. The experimental results verified that PID controller is feasible to the system.

实验结果表明，其控制效果达到了预定的指标。

56. The actual result indicates that the method has higher precision ,smaller overshoot and stronger robustness,compared with common PID controller.

实验表明,这种方法比普通的PID控制方法精度高、超调量减少,具有较强的鲁棒性。

57. Such as,the cold/heat wind control logic is corrected,the scale factor is increased,the parameters of the two-stage PID are adjusted,and so on.

对两级比例积分微分(PID)参数作了调整等。

58. Moreover, for PID Controller, it designs five fine turning methods in terms of IAE, ISE and ITAE.

对于PID控制器，以IAE、ISE、ITAE为系统的性能指标，并设计了五种微调方法。

59. For rows with Tag column value 3, columns OrderDetail!3! Id! Id and OrderDetail!3! Pid! Idref form a group.

对于Tag列值为3的行,列OrderDetail!3!id!id和OrderDetail!3!pid!idref形成一组。

60. Controlling of each tache adopted PID control,forming PID cascade control. The merit of PID cascade control was got.

对每个环节的控制算法都采用PID控制,形成了PID串级控制,得出了PID串级控制的优点。

61. The number of surviving mice after 4 PID in C group was evidently smaller than that in A and M groups (P<0.05).

对照组小鼠伤后4 d存活数明显少于抗菌肽组、磺胺米隆组(P<0.05)。

62. Vacuum, gravity flow, and other solids discharge, according pipeline flow chart meters (PID) equipment layout of the elevation requirements.

对真空、重力流、固体卸料等情况，一律按管道仪表流程图（PID）的标高要求布置设备。

63. It obtains good effect that the fuzzy PID control applied in the process of auto-discharging.

将模糊PID控制算法应用于系统的自动排料过程,取得了明显效果。

64. The algorithm is applied to the optimization of PID parameter，compared to SGA.

将该算法应用于PID控制器参数的优化，并与具有精英保留的SGA进行比较。

65. Because routine PID control algorithm depends on exact model, it is difficult to get anticipative effect.

常规的PID控制算法因过于依赖于模型的精确性，对飞机防滑刹车系统的控制难以达到预期效果。

66. Tune the three parameters of PID controller to ameliorate the performance of control system.

并且研究了PID控制器的三个参数对控制效果的影响,改善了系统控制性能。

67. The conventional PID controller and the fuzzy-PID controller are realized by the configuration software MCGS.

并用组态软件MCGS实现了普通PID和模糊PID控制算法。

68. I want to rule out PID (pelvic inflammatory disease).

我要排除盆腔炎症疾患。

69. PID can lead to internal abscesses (pus-filled "pockets" that are hard to cure) and long-lasting, chronic pelvic pain.

控制,可导致内部脓肿(脓填充"口袋",是难以治愈)和长期的,慢性骨盆腔疼痛。

70. PID can damage the fallopian tubes enough to cause infertility or increase the risk of ectopic pregnancy.

控制可损害输卵管足以引起不孕或不增加患宫外孕。

71. What does the PID controller do, and how does it do it?

控制器作些什么?如何去做?

72. Such as: Input Control order configuration, the choice of PID function, store motor's temperature and so on.RCE-L is a numeric management system.

控制的中心是微处理器，实现电机控制及外部通讯的管理，使执行机构从简单的模拟控制上升到复杂的控制，包括内部的控制器和现场总线的界面等功能。

73. A design method of speed controller of AC servo system is proposed in this paper.The parameters of PID controller is optimized by genetical gorithms.

提出一种交流伺服系统速度控制器的设计方法，即将控制器设计问题作为一参数优化问中题，采用遗传算法对PID控制器参数进行优化。

74. The strategy of parameter fuzzy automatic adjustive PID control is put forward and is used in aircraft electric braking system.

提出了一种参数模糊自整定PID的控制策略在飞机全电刹车系统中的应用。

75. It presents robust PID tuning for the Smith predictor in the presence of model uncertainty.

提出了模型不确定时史密斯预估器的鲁棒PID调整。

76. Abstract： Digitizes every segment of automatic control system and attained PID control.

摘 要： 自控系统的每个环节数字化，用计算机实现PID控制。

77. The application of temperature and humidity PID control technology in the refrigerator-testing laboratory is described.

摘要介绍了PID控制技术在冰箱试验室的温湿度控制中的应用。

78. The strategy of parameter automatic adjustive PID control is put forward to realizing the high-quality BLDCM servo-system based on TMS320F2812 DSP.

摘要介绍了基于TMS320F2812数字信号处理器、采用新型PID参数自整定分段控制的方法实现高精度无刷直流电机伺服控制系统。

79. The control system of multi-variable PID neural network is introduced.

摘要介绍了多变量PID型神经元网络控制系统。

80. Based on convex combination, a design method for nonlinear PID controller is proposed and its parameters are analyzed.

摘要利用凸组合方法构造非线性PID控制器，并对有关参数进行了分析。