plunger

plunger

1. Designed a set of electro-hydraulic proportional system of forming hydraulic press of heteropolarity multilevel magnetic ring, established the mathematical model of the top plunger cylinder.

3.设计了极异方型多级磁环成形液压机的电液比例控制系统,建立了上模缸上腔的数学模型。

2. The BZ 740 pump is a high pressure and large flow axial plunger pump.

740泵是铝型材挤压机普遍使用的一种高压、大流量的斜轴式轴向柱塞泵。

3. The BZ 740 pump is a high pressure and large flow axial plunger pump.The operation, breakdown and maintenance method were introduced.

740泵是铝型材挤压机普遍使用的一种高压、大流量的斜轴式轴向柱塞泵。介绍了该泵的使用要点，故障和维护方法。

4. BM Axial plunger pump of oblique axis

BM斜轴式轴向柱塞泵

5. R1 is influenced by several factors, including the material and condition of the target and plunger, the surface area and shape of the plunger tip, and the amount of force applied.

R1受几个因素的影响，包括目标和顶杆的材料和状况、顶尖的表面积和形状以及所施加的力的大小。

6. R2 is the point of signal transfer between plunger and barrel.

R2是顶针与套壳体之间的信号传输点。

7. The RZB series lubricant pump is more than one kind of spot independent plunger type electric pump. This product quality is reliable, durable, achieves the international advanced level.

RZB系列润滑脂泵是一种多点独立柱塞式电动泵。该产品质量可靠，经久耐用，达到国际先进水平。

8. WOMA designs, produces and sells high-pressure plunger pumps driven by electric motors or combustion engines.

WOMA公司设计、制造和销售电动机或内燃机驱动的高压柱塞泵。

9. plunger type die casting machine

[机] 柱塞式压铸机

10. fan-tail type plunger line switch

[电] 扇尾式插棒侍线键

11. A moveable plunger is rigidly attached to the nozzle, and supported in a guide in the lower secion of the injector body.

一个移动柱塞固定喷嘴上，支撑在喷油器下端的导杆上。

12. Nor, once the crisis struck, was he the only central banker to prove handy with monetary plunger and wrench.

一旦危机爆发，其实他并不是唯一唾手可得的中央银行家，能像使用塞子和扳手一样调整货币政策。

13. Design of Injection Mold for Syringe Plunger

一次性注射器推筒注射模设计

14. Third as a result of the plunger pump shell level sets of the vertical plane with one axis deviation is too large pressed the plunger after the deformation caused by stagnation seca column.

三是由于泵壳上柱塞套台阶平面与其中轴线垂直度偏差过大，压紧后柱塞变形造成柱塞卡滞。

15. This article innovatively proposed the relay-like plunger lifting installment and has designed the structural.

与常规柱塞举升相似，组合油管接力式柱塞举升包括井口部分和井下部分。

16. Both systems use the spring or plunger instability against its counterpart to create the bias effect.

两种系统都使用弹簧或顶针相对于其配对体的不稳定性来形成偏置效果。

17. China-LuTong Part Plant is the diesel fuel injection Manufacturer; specialist in producing Diesel, Repair kit, pump, Head rotor, Nozzle, plunger, D.Valve ect.

中路通配件厂是专业生产柴油燃油喷射注射系统,专门生产柱塞,油嘴,油泵,出油阀等等一系列产品。

18. China-LuTong Part Plant is the diesel fuel injection Manufacturer;specialist in producing Diesel,Repair kit,pump,Head rotor,Nozzle,plunger,D.Valve Diesel pump ZEXEL,BOSHC ect.

中路通配件厂是专业生产柴油燃油喷射注射系统，专门生产柱塞，油嘴，油泵，出油阀等等一系列产品。

19. In order to verify the performance of fracturing truck and plunger pump,bench test,final assembly test and field industrial test should be performed.

为了验证压裂车和柱塞泵的性能,进行了台架试验、出厂试验和现场工业试验。

20. Studied the relationship of elastic vib ration of rod and working conditions of pump, proposed a method to analyze indic ator diagram, calculate parameters such as swab rate, depth of plunger and depth of break by elastic vibration rule.

为此,研究了抽油杆弹性振动规律和泵工作状况的内在联系,提出了利用弹性振动规律来分析示功图及计算抽汲速度、泵挂深度和断脱深度等参数的方法。

21. The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of roller which are rolling in the ring, which are driven by dial through plunger.

主机电动机通过减速器带动主轴及各层转盘旋转，转盘通过柱销带动几十个环辊在磨环滚道内滚动并旋转。

22. The transformation on sealing components of glass pipeline in import sulphuric acid refine device from abroad and sealing structures of the imported high pressure plunger pump is introduced.

介绍了引进硫酸精制装置中玻璃管路密封件以及高压柱塞泵密封结构的改造。

23. He grinds the meat in an electric grinder, pushing it into the hopper with a wooden plunger .

他把肉放在电动肉磨上，用一个木头唧子推进了漏斗。

24. He worked the plunger on the end of the cord she had seen hanging out of his vest yesterday. The shutter fired. He cocked the shutter and fired again.

他摆弄一下她昨天看见的从背心挂出来绳子的活塞,快门闪了一下,他扳了一下快门,又闪了一下。

25. The retention and stability of bilateral distal-extension removable partial dentures with plunger attachments were better than clasp of RPD.

以插销式附着体为固位体的双侧远中游离端局部活动义齿的固位和稳定性高于普通三臂卡环为固位体的义齿。

26. This validation is made with the basic data of Wei37 well. By employing the calculation program of self-organized, a cycle of plunger lift is simulated.

以蜀南气矿威37井为例,利用自行编制的程序,对柱塞举升的单个周期进行了动态模拟,分析了柱塞举升单个周期内油压、套压、井底流压和产气量随时间的变化规律;

27. However, in the field of small flow of high pressure reciprocating pump still occupy a major position, especially the diaphragm, plunger pump with unique advantages, the application is increasing.

但是在高压小流量领域往复泵仍占有主要地位，尤其是隔膜泵、柱塞泵独具优点，应用日益增多。

28. Low epispastic stuff must use infuse of extruder of screw of force plunger type, because the burden before infuse needs low pressure.

低发泡材料必须用柱塞式螺杆挤出机注入，因为注入前的配料需要低压。

29. Did you try to use a plunger?

你试过用马桶拔吗？

30. There are two kinds of plunger pump available for model 2000 fracturing truck,i.

供2000型压裂车选择的柱塞泵有三缸泵和五缸泵2种。

31. The bias-ball system is the most aggressive, providing a highly consistent connection between the plunger and barrel by compressing a ball against an angled plunger.

偏置球系统最有积极性，通过将球压到一个倾斜的顶杆，在顶针和客体之间提供极其一致的连接。

32. Bias-plunger and bias-spring systems are less aggressive, and subsequently deliver a less consistent, yet still acceptable, connection between plunger and barrel.

偏置顶针和偏置弹簧系统的积极性较低，因而在顶杆和套筒之间提供一致性较低但仍可接受的连接。

33. The action principle is as follows : When the valve body at around 2 pm between iron block, the spring plunger 12 13 stretch under left movements, the plunger cavity volume have increased LV cavity.

其动作原理如下：当泵阀体处于前后两挡铁之间时，柱塞12在弹簧13的弹力作用下向左运动，使柱塞腔的容积增大产生低压腔。

34. The device integrated traditional combustion engine and plunger pump technique, made directly use of the rectilinear motion of plunger for outputting water power.

内燃式水动力装置将传统内燃机与柱塞式水泵技术集成为一体,直接利用活塞往复直线运动输出水压能。

35. slack adjuster worm plunger spring

减速调整器蜗杆柱塞弹簧

36. This paper analyzed the relations between vibration and plunger wear of reciprocating pump, and studied the characteristics for the diagnosis of plunger wear.

分析了往复泵柱塞-缸套磨损振动诊断机理,研究了振动时域、频域特征。

37. The paper mainly tells the failure result of packing in plunger pumps and briefly introduces the installing focus and applying efficiency of TFA packing in plunger pumps.

分析了柱塞泵中填料失效的原因，介绍了TFA填料在柱塞泵中的安装要点及应用效果。

38. distributor cap contact spring plunger

分电器盖接触弹簧柱塞

39. Odorization pumps are specially designed diaphragm plunger metering pump, plunger travel of the exercise machine lock, each time to maintain a constant output.

加臭泵是专门设计的隔膜式柱塞计量泵，柱塞的运动行程机械锁定，每次输出量保持恒定。

40. PACKING DESIGN MUST BE APPROVED BY OR PRODUCT ENGINEER IN ORDER TO VERIFY DRAINAGE OF OIL COMPLETELY FROM PLUNGER BORE AND PREVENYION OF CORROSION.

包装要通过产品工程部批准,并确认活塞孔排油畅通,且包装防腐蚀。

41. DW- series single hydraulic prop's plunger piece

单体支柱柱体

42. Single acting plunger oil cylinder

单作用柱塞油缸

43. single plunger plastic injection moulding machine

单柱塞塑料注射成型机

44. horizontal plunger die casting machine

卧式压铸机

45. New gas drainage recovery method was studied and developed.Study on plunger lift technique with gas produced from in-situ wells were carried out with field experiments conducted, which proved that...

即本井气柱塞气举并进行了现场试验,取得了良好的效果,为油田部分低含水高气油比油井的开发和气井的排水采气提供了有效的举升技术支持。

46. Pressure equaligation variable axial plunger pump

压力补偿变量轴向柱塞泵

47. Improvement of Plunger of the Die Casting Machine

压铸机压射冲头的改进

48. Another form of applicator is equipped with a plunger which can be operated to empty the internal cavity of the tube through the distal end opening.

另一种形式的给药器上装有活塞，可以通过活塞从给药器管末端的开口处清空内膛。

49. It can be used to energise the plunger cylinder if the control voltage of the servo circuit has failed.

可以在没有伺服回路的控制电压时激活活塞杆。

50. variable displacement plunger pump

可变容量排气泵

51. Local resistance coefficient of water cut oil in the plunger is an important parameter to design and calculate in actual production.

含水原油在柱塞凡尔中的局部阻力系数是实际生产中进行设计、计算时十分重要的参数。

52. Check whether or not the fuel injection pump plunger and fuel outlet valve is worn or clogged, plunger spring and fuel outlet valve spring is broke.

喷油泵柱塞及出油阀是否磨损或卡死、柱塞弹簧及出油阀弹簧是否折断；

53. FIGURE 3. The eccentric bias system, which uses a contact with a backdrilled plunger, exhibits this typical resistance stability over multiple mating cycles.

图3.偏心系统，使用后钻孔顶针，显示多次配接时的典型电阻稳定性。

54. FIGURE 6.Within a spring contact system, the points of transfer are where the tip meets the target, where the barrel and plunger meet, and where the barrel meets the printed circuit board.

图6.在一个弹簧触弹针系统中，传输点是顶针与目标相接触的地方、客体与顶针相接触的地方以及套客体与印刷电路板相接触的地方。

55. Of thetraditional time-domain parameters, the peak-to-peak value, variance, kurtosis value, clearance factor can be selected as the diagnostic parameters for their sensitivities to plunger wear.

在传统的时域指标中,峰峰值、方差、峭度指标、裕度指标对磨损故障比较敏感,可作为诊断特征参数;

56. For assuring the maximum flow area at outlet of plunger, the outlet runner of plunger is supposed to be streamline, which would lower the flow resistance at outlet plunger.

在保证柱塞出口有最大过流断面的同时，也应将柱塞出口流道设计成流线型，以此降低柱塞出口处的过流阻力。

57. Plunger lift was first applied in Tuha Oil Field to solve the problems of high water-cut and low-producing gas lift wells.And obvious effect of production increment was obtained in the field test.

在柱塞气举工艺及配套工具前期技术储备的基础之上,首次应用柱塞气举采油技术解决鄯善油田低产、高含水、低效气举井的问题,在现场试验中取得了明显的增产效果。

58. Stuffed behind. the packs was a tan vest with many pockets. Out of one pocket dangled a thin cord with a plunger on the end.

在这些包包后面塞着一件有许多口袋的背心,从一只口袋中挂下一条一端有活塞的绳子。

59. Based on the maximal speed of the working plunger,the structure of valve body and open schedule of distributor's spool were optimized.

基于有限元方法和阀体主要结构参数的灵敏度分析,以阀体最小体积为优化目标,对阀体进行了优化设计。

60. Collar threads, plunger threads and base mounting holes enable easy fixturing(on most models).

大多数千斤顶颈部、活塞杆有丝牙，底部有孔，便于安装。

61. She depressed the plunger fully and pulled out the shot.

她松开了活塞然后拔出了针头。

62. The most important technology is how to determine the thrust of every plunger.

如何确定各个柱塞的推力大小是技术关键。

63. Install a dial indicator so plunger contacts valve spring retainer as nearly perpendicular as possiblZero the indicator.

安装一个表盘式指示器，使柱塞与气门弹簧护圈尽可能垂直。将指示器调零。

64. This timing is affected by the relationship among poppet weight, spring rate, poppet travel distance, plunger speed, and plunger diameter.

定时受提升阀重量，弹簧振频，提升阀阀程，活塞速度以及活塞直径的影响。

65. Examine the plunger joint ring of electric hydraulic draw stem and pneumatic draw stem in order to ensure the normal operation of transmission device.

定期检查电液推杆、气动推杆的活塞密封圈，以保证传动装置正常运行。

66. They are indispensable material when used as high strength, high finishing and insulation material, such as ceramic plunger,sealing ring, surgical knife, IC area and so on.

对抗折抗强度绝缘性能高光洁度要求较高的产品是不可缺少的材料。如：陶瓷柱塞陶瓷轴套密封环陶瓷手术刀集成电路电动剃须刀片等。

67. The calculation and analysis of the damage failure of the plunger hole wall for the aeroplunger pump ZB-16D are presented.

对航空柱塞式液压泵ZB-16D的柱塞腔壁贯穿故障进行了结构和受力分析及计算。

68. Use of The Tube Type Heat-Exchanger with Plunger

带插入件金属管状换热器的使用

69. relief valve with dashpot plunger

带缓冲柱塞的安全阀

70. The suction of the plunger should be designed as type of streamline or bell mouth, which would decrease the suction resistance.

应考虑将柱塞的吸入口设计成流线型或喇叭口型，以降低其吸入阻力。

71. Ball Plunger, Soft-tip socket set screw, socket screw, disc spring, dowel pins, springs pins, washers.

弹性柱塞,不锈钢螺丝,公,英,美制紧固件

72. A game played on a device in which the player operates a plunger to shoot a ball down or along a slanted surface having obstacles and targets.

弹球戏在一种装置下进行的游戏，在该装置中玩球者操作一个活塞将球击倒至或沿着一个有障碍物或目标物的倾斜表面

73. When the hand wheel rotation through the stem hole lead plane in the middle of the plunger up and down reciprocating movement to complete the valve to open and close the function.

当手轮旋转，通过阀杆带动柱塞在孔架中间上下往复运动来完成阀门的开启与关闭功能。

74. With the car upside-down, the ball forces the plunger to seat against the guide plate.

当汽车倾倒时，滚珠迫使柱塞落在支承板上。

75. Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射器针尖插入汽化室后，在压下注射器柱塞杆之前，会引起高沸点组分的损失。

76. Some Problem in Usage of High Pressur Plunger Pump

往复式高压水泵使用中要注意的几个问题

77. Reciprocating pump, the packing box should be at the two ends and the middle of Central Add-oriented in order to maintain the concentric movement and gravity plunger.

往复泵中，填料箱内的两端和中间还应放入导向环，以保持其同心运动和受柱塞的重力。

78. Reciprocating plunger seals have been substitute by mechanically or hydraulically actuated diaphragms in diaphragm pumps.

往复活塞密封被机械密封和液力隔膜泵所替代。

79. Quickly she jabbed the shot into Michael's arm and, through his squirming, withdrew the plunger slightly to make sure there was no blood.

很快，她猛地把针头刺进了麦克的胳膊，麦克一直都在蠕动，她轻轻得拉出活塞以确定没有血渗出。

80. Hard chrome plated pistion and pump plunger ensuer durability and corrosion resistance. Super-High strong steel frame with slw lowering when load and quick lowering when unload.

手动液压搬运车液压缸体为优质钢焊接而成,柱塞杆、泵芯镀硬铬,耐磨、耐腐蚀。安全阀过载保护。超高强度货叉结构具有满载慢降、空载快降功能。