polymeric

polymeric

1. The size of the as prepared polymeric micelles is about 50nm, based on our DLS characterizations.

DLS结果证明形成的纳米胶束流体力学尺寸为50nm以下。

2. JS polymer cement-based waterproof Paint and Water leakage etc.

JS聚合物水泥基防水涂料及水不漏等。

3. The polymeric reaction of MC nylon is of anionoid recombination.

MC尼龙的聚合反应属于阴离子型催化反应;

4. Please call TOSCANA LASTS LTD, if you need further views for Polymer or Shoe.

TOSCANA LASTS LTD公司为您提供准确的、可靠的聚合物、聚合体,鞋、闸瓦承座。

5. A high polymer is a very large aggregation of units.

一个高聚物是许多单元的非常大的组合。

6. Once injected into an aqueous enironment, the polymeric mixture solidified into a solid implant due to the leaching of NMP.

一旦注入水相环境，此聚合混合物就会因NMP的浸出而固化成一种固体埋植体。

7. A working substance has been prepared by treating perfluorinated polymeric oils and greases.

一种工质已由全氟聚合物油和润滑脂制造出来。

8. BUNa-N is a general purpose oil resistant polymer known as nitrile rubber.

丁腈橡胶(BUNa-N)是一种多用途抗油品腐蚀聚合物,称为腈橡胶。

9. Ferric Chloride alone gives polymer with benzene.

三氧化铁可单独催化苯的聚合。

10. Shanghai Keter Polymer Material CO., Ltd.

上海科特高分子材料有限公司。

11. Both are polymer replicas of master gratings.

两个都是标准光栅的聚合物复制品。

12. For the flame retardant chemical to be effective, it must be available at the point at which the polymer decomposes.

为了使化学阻燃剂有效,务必在聚合物分解之时,阻燃剂能发挥作用。

13. Generally, they can be classified into two types: organic polymeric and silica-based monolithic columns.

主要包括有机聚合物型和硅基整体柱两种类型。

14. This then taints their view of all polymer sealants unfairly.

于是他们觉得聚脂密封剂不好。

15. A new method for synthesizing polymeric ferric sulfate (PFS) which main material are waste sulphuric acid and offscum.

介绍了一种以工业废渣-炼钢烟尘为主要原料,辅以化工厂废硫酸而制成高效无机絮凝剂-聚合硫酸铁(PFS)的新方法。

16. Ion beam induced surface modification of polymer was extensively discussed.

介绍了运用高能离子束对聚合物材料进行表面改性的新工艺。

17. A kind of polymeric fatliquor PCF was synthesized via free copolymerization from amided colza oil succinate, acrylic acid and vinyl acetate.

以酰胺化菜籽油马来酸单酯、丙烯酸和醋酸乙烯酯为原料,通过乳液共聚制得了菜籽油聚合物加脂剂PCF。

18. A colorless liquid polymer, C6H12O3, of acetaldehyde, used as a solvent and a sedative.

仲（乙）醛，三聚乙醛一种用作溶剂和镇定剂的无色液体聚合物，C6H12O3

19. A polymer that consists of two, three, or four monomers.

低聚体由二个、三个或四个单体构成的聚体

20. A short polymeric chain of two to ten nucleotides.

低（聚）核苷酸由两个到十个核苷酸构成的一条短聚体链

21. A polymer of two or more different monomers.

共聚物一种由两种或多种不同单体构成的聚合物

22. Chitin is a polymer of N-acetylglucosamine.

几丁质是N－乙酰葡糖胺。

23. The development of antistatic polymer composites was reviewed.

分析了防静电高分子材料的研究现状;

24. The polymer film's hydrophile was test with contact angle machine.

利用接触角测试仪分析该聚合膜的亲水性。

25. The insulated polymeric film was proved to be polymer arylether by time-resolved rapid scan infrared spectroscopy.

利用超微电极技术研究了丹皮酚电化学氧化的动力学过程，并用时间分辨快速扫描现场红外光谱电化学证明了电极表面的聚合物膜是芳醚类聚合物。

26. The addition of a cosurfactant can improve solubilization in polymeric rever sed micelles.

助表面活性剂的加入可以促进聚合物反胶团的增溶作用.

27. The complex 1 features a 2D tetrazole coordination polymer.

化合物1为二维四唑配位聚合物。

28. The microstructure and morphology of single polymer chain.

单个高分子链的结构和形态。

29. A molecule that can combine with others to form a polymer.

单体可以与其他分子结合形成聚合物的分子

30. Nanjing Ruiya Polymer Processing Equipment CO., LTD.

南京瑞亚高聚物装备有限公司。

31. Model atomic, polymeric, biological, metallic, or granular systems using a variety of force fields and boundary conditions.

可以建模原子、有机高分子、生物分子、金属或者粗粒子系统。可以在不同的力场和边界条件下进行系统建模。

32. On the rigid surfaces of non-ferrous metal as finish, concrete, asbestos-cement board, plank, polymeric ester etc.

可作为饰面涂料涂装在非铁金属、混凝土、水泥石棉板、木板、聚酯及其他刚性表面。

33. On the rigid surfaces of non-ferrous metal, concrete, asbestos-cement board, plank, polymeric ester.

可涂装在非铁金属,混凝土、水泥石棉板、木板、聚酯及其他钢性表面。

34. The product is a kind of amphiprotic polymer with multifunction.

同时考察了它在钻井液中的抗温、抗盐和配伍性。

35. CFCs are chlorine, fluorine and carbon polymer.

含氯氟烃是氯、氟及碳的聚合物。

36. We adopted Carreau model to describe the polymeric fluid, which is widely used on describing polymeric fluid with shear-thinning nature.

吾人以卡罗流体模型描述高分子流体行为，此模型特别适合描述具有剪力稀薄现象的流体。

37. Carreau P J,et al.Rheology of Polymeric Systems Principles and Applications.New York:Hanser Publishers,1997.

周持兴.聚合物流变实验与应用.上海:上海交通大学出版社,2003

38. In this reaserch work, we had basic reaserch on anticoagulant material which is one kind of polymeric biomaterials.

因此，提高抗凝血性一直是生物材料研究与发展的主要内容之一。

39. Solid polymer electrolyte capacitor humidity sensor.

固体聚合物电解质电容式湿度传感器。

40. Present status on the research and application of geo - polymer.

土聚水泥的应用及研究现状。

41. In chemical and pharmaceutical fields, polymeric materials containing cholic acid can be used widely.

在化学和药学领域，含胆酸高分子材料具有重要的应用价值。

42. In this thesis, the short chain MEH-PPV polymer is studied.

在本论文中所讨论的研究材料是短链的MEH-PPV分子。

43. Use the XCD polymer as the viscosifier and fluid loss additives in mud.

在泥浆中用XCD生物聚合物作为提粘剂和降失水剂。

44. There shall be no permanent deformation of the polymeric housing, and electrical spacings shall comply with Clause3.11.

塑胶外壳不能有永久性变形，电气部件的间隔也能符合第3.11条的标准。

45. Most polymer emulsion may coagulate when they enter waste streams.

多数聚合物乳浊液在进入废水流时可能凝聚。

46. A polymeric compound consisting of a number of nucleotides.

多（聚）核苷核由许多核苷酸构成的一种聚合化合物

47. The inhibition performance of the polymeric film by in situ has been studied by gravimetric method.

失重试验结果表明膜层的缓蚀性能取决于乳液体系的成份,浓度和温度等。

48. Stearalkonium hectorite, Fluoroaliphatic polymeric esters B.

安定剂:增加产品的安定性及稳定性。

49. A new method is developed for measurement of the thermal expansion coefficient (CTE) of polymeric foams at low ...

实验结果表明:低温位移传感器可准确、稳定地得出泡沫塑料材料的,是一种简单实用的测试方法。

50. High conductivity polymer ion conductor in R.T.

室温高导电率高分子离子导体。

51. The application performance of new polymeric oil-displacing agent is studied.

对新型聚合物驱油剂的应用性能进行了研究。

52. That means PMMA has changed from polar polymer to non-polar polymer.

对此现象的解释机理提出了“孔洞”与“极性基团断裂”两种假设。

53. The mechanism of drug release from swellable polymer was studied .

对药物从亲水聚合物凝胶系统中释放的机理进行了研究。

54. The funding programs on polymer science have been brie fly introduced.

对近期国家自然科学基金化学科学部高分子科学学科的基金资助情况进行简要介绍。

55. For water injection wells, some technologies such as CDG gel, polymeric compound driving, profile control and acid...

对这些措施的效果进行了分析和比较表明,CDG凝胶、聚合物驱及侧钻工艺应是今后主要采取的增产措施。

56. Any necessary adjustments can then be made with Drispac R/SL and XCD polymer.

对钻井液作任何必要的调整都可以用高粘或低粘锥斯派克和生物聚合物。

57. Nano titanium polymer paint was chosen as the anticor rosive paint.

对防腐涂料进行了筛选,确定采用钛钠米聚合物涂料作防腐涂层。

58. Shandong Weigao Group Medical Polymer Co., Ltd.

山东威高集团医用高分子制品股份有限公司。

59. Changzhou Dupeng Polymer Material Co., Ltd.

常州都朋高分子材料有限公司。

60. Application of photorefractive polymer in electrooptics[J].

引用该论文 刘建静,郝伟,刘锴,唐保军.

61. Thermosensitive Liquid Crystal Polymer Color Image Display[J].

引用该论文 史永基,史建军,史红军.

62. Persistent spectral hole-burning of tetramethoxyphenyl porphin in a polymeric host[J].

引用该论文 陈凌冰,赵有源,王国益,潘玉莲,李富铭,房建华,李军,潘道成.

63. Electrooptic effect in dyeooped polymer light waveguide film[J].

引用该论文 马于光,刘式墉,朱江,沈家骢.

64. C.K. Ober, M.L. Hair, J. Polym. Sci., Part A: Polym Chem. Ed. 25 (1987) 1395.

张洪涛、江兵兵、黄锦霞，高分子材料科学与工程18(2002)57.

65. Shape retention is a factor in almost all articles made from polymeric materials.

形状保持性是所有聚合物材料制品共有的因素。

66. Short for polymer, or polymeric, light-emitting diode, a backlighting, illumination and display technology. Polymers are substances for......

您还没有登陆，只能查看部分内容，欲知全文内容，请选择[注册]或者[登陆]。

67. Every polymeric housed MOA puts up the disconnector.The disconnector is equipped with the insulation bas.

所有复合外套MOA均可以配套脱离器，其一般安装于绝缘支架上。

68. The status of polymer solid alloy was analyzed.

报道了高分子固体合金的研究现状。

69. The development trend of the antistatic polymer materials...

指出抗静电高分子材料的发展趋势。

70. Formation of polymeric deposit was investigated in methane conversion by microwave plasma.

摘要考察了微波等离子体甲烷转化反应中积炭的形成条件。

71. Poly(ethylene glycol) (PEG) is a hydrophilic polymer which has flexible long chain.

摘要聚乙二醇是一类亲水性长链聚合物。

72. Abstract: Polyphosphazenes are inorganic polymeric functional materialsthat have unique characterization.

文摘:聚磷腈是一类具有特殊性能的无机高分子功能材料。

73. Polymer Coating Technologies of Singapore Pte Ltd.

新加坡涂装技术有限公司。

74. Method: Aqueous acrylic polymeric dispersion(Eudragit RS/RL)was used as a film material.

方法采用丙烯酸树脂水性包衣工艺,通过体外溶出试验对工艺参数进行筛选。

75. Wuxi Yutian High Polymer Material Co., Ltd.

无锡市裕田高分子材料有限公司。

76. There was a synergism among alkali,surfactant and polymer.

显微照片验证了含驱油剂的乳液存在多重乳状液。

77. Coverage of polymer particles is obviously influenced by emulsifier structure.

显然聚合物胶粒总数受乳化剂结构的影响。

78. Finally, inestigation continues in the use of nonmetallic, polymeric composite stems of significantly lower stiffness.

最后，能明显降低刚度的非金属、聚合物柄仍在研究之中。

79. University Qualification preferably in Polymer Material field.

有与高分子材料相关专业的本科以上学历。

80. This paper introduces the flocculation mechanism,sorts,characters and application of polymeric flocculant.

本文介绍了高分子絮凝剂的絮凝机理、种类、性质及其应用。