polymerization
polymerization
1. I directed students to do polymerization in 2001.
2001年,我指导学生做聚合。
2. JS polymer cement-based waterproof Paint and Water leakage etc.
JS聚合物水泥基防水涂料及水不漏等。
3. The number of monosaccharide units in a polysaccharide, termed its degree of polymerization (DP), varies.
一个多糖中的单糖单元数目,即聚合度(dp)是多种多样的。
4. A high polymer is a very large aggregation of units.
一个高聚物是许多单元的非常大的组合。
5. In general ionic polymerization can be initiated through acidic or basic compounds.
一般来讲，离子型聚合可以被酸类或碱类化合物所引发。
6. BUNa-N is a general purpose oil resistant polymer known as nitrile rubber.
丁腈橡胶(BUNa-N)是一种多用途抗油品腐蚀聚合物,称为腈橡胶。
7. Ferric Chloride alone gives polymer with benzene.
三氧化铁可单独催化苯的聚合。
8. Shanghai Keter Polymer Material CO., Ltd.
上海科特高分子材料有限公司。
9. Both are polymer replicas of master gratings.
两个都是标准光栅的聚合物复制品。
10. For the flame retardant chemical to be effective, it must be available at the point at which the polymer decomposes.
为了使化学阻燃剂有效,务必在聚合物分解之时,阻燃剂能发挥作用。
11. This then taints their view of all polymer sealants unfairly.
于是他们觉得聚脂密封剂不好。
12. Two types of polymerization are recognized: (1)condensation polymerization and (2) addition polymerization.
人们已知有两种聚合方式：(1)缩聚,(2)加聚。
13. Porous polymer beads as the supporter for enzyme immobilization were synthesized by means of suspension polymerization with mixed solvent as the diluent.
以不同孔径的聚苯乙烯小球作载体研究固定化酶,使酶的分子尺寸与载体孔径尺寸匹配。
14. The sizes and their distributions as well as morphologies of polymer microspheres at various emulsion polymerization steps were characterized by means of DLS, TEM and FESEM.
以动态光散射(DLS)、透射电子显微镜(TEM)和场发式扫描电子显微镜(FESEM)等对各阶段乳液聚合的胶粒大小和分布以及形态结构进行了表征。
15. White powdered homopolymer resin produced through suspension polymerization (medium degree of polymerization).
以悬浮聚合方式制造的单聚合物树脂，是白色粉状的中聚合度产品，消光效果优良。
16. A colorless liquid polymer, C6H12O3, of acetaldehyde, used as a solvent and a sedative.
仲（乙）醛，三聚乙醛一种用作溶剂和镇定剂的无色液体聚合物，C6H12O3
17. A polymer that consists of two, three, or four monomers.
低聚体由二个、三个或四个单体构成的聚体
18. A polymer of two or more different monomers.
共聚物一种由两种或多种不同单体构成的聚合物
19. Chitin is a polymer of N-acetylglucosamine.
几丁质是N－乙酰葡糖胺。
20. Effect of dispersion agent on the properties of water-absorption Resin in inverse suspension polymerization.
分散剂对反相悬浮聚合吸水树脂性状的影响。
21. The development of antistatic polymer composites was reviewed.
分析了防静电高分子材料的研究现状;
22. The polymerization could be controlled with the use of DPE.
利用DPE作为活性游离基控制剂。
23. The polymer film's hydrophile was test with contact angle machine.
利用接触角测试仪分析该聚合膜的亲水性。
24. Added monomer diffuses into the micelle for polymerization.
加入的单体扩散进入胶团做聚合反应。
25. The complex 1 features a 2D tetrazole coordination polymer.
化合物1为二维四唑配位聚合物。
26. The microstructure and morphology of single polymer chain.
单个高分子链的结构和形态。
27. A molecule that can combine with others to form a polymer.
单体可以与其他分子结合形成聚合物的分子
28. The key factors affecting the polymer intrinsic viscosity were found to be monomer recrystallization times,stannous octoate concentration and polymerization time.
单体重结晶次数、辛酸亚锡浓度、聚合时间等条件均是影响聚合物特性粘数的重要因素。
29. Nanjing Ruiya Polymer Processing Equipment CO., LTD.
南京瑞亚高聚物装备有限公司。
30. The polymerization initiated by KPS was also discussed.
同时对KPS引发聚合体系亦进行了比较考察。
31. The product is a kind of amphiprotic polymer with multifunction.
同时考察了它在钻井液中的抗温、抗盐和配伍性。
32. CFCs are chlorine, fluorine and carbon polymer.
含氯氟烃是氯、氟及碳的聚合物。
33. Solid polymer electrolyte capacitor humidity sensor.
固体聚合物电解质电容式湿度传感器。
34. A hardening agent mixed with the monomer will induce polymerization.
固化剂与这种单体混合将引起聚合反应。
35. Present status on the research and application of geo - polymer.
土聚水泥的应用及研究现状。
36. In addition polymerization, unsaturated or cyclic molecules add to each other without elimination of any portion of the monomer molecule. The empirical formula of the polymer is then, of course, the same as that of the monomer.
在加聚反应中,不饱和的或环状的分子之间彼此加成,没有消除任何分子,这样,聚合物的实验式就当然与单体的实验式相同。
37. Under the same conditions, propylene oxide polymerization proceeded fasfer than ECH polymerization.
在同样的聚合反应条件下,环氧氯丙烷聚合反应速度大于环氧丙烷聚合反应速度。
38. In the polymerization systems studied, segmental rearrangement is the important rate-determining phenomenon.
在已研究过的聚合体系中链段重排是重要的速度决定步骤。
39. In this thesis, the short chain MEH-PPV polymer is studied.
在本论文中所讨论的研究材料是短链的MEH-PPV分子。
40. Use the XCD polymer as the viscosifier and fluid loss additives in mud.
在泥浆中用XCD生物聚合物作为提粘剂和降失水剂。
41. In condensation polymerization, each monomer unit must have at least two functional groups.
在缩聚反应中,每个单体至少要有两个官能团；
42. It is not surprising to find that the observed order in monomer for the polymerization exceeds unity.
在聚合中发现单体的反应极数大于1是不足为奇的。
43. In a tower reactor polymerization may be carried out in two zones.
塔式反应器中聚合可分为两段进行。
44. Most polymer emulsion may coagulate when they enter waste streams.
多数聚合物乳浊液在进入废水流时可能凝聚。
45. Miscellaneous UV-dosage applications including UV-induced polymerization or drying.
多种紫外剂量应用包括紫外诱导聚合反应或干燥。
46. Produced by emulsion polymerization using, for example, persulphate initiation.
它由乳液聚合制得，例如用过硫酸盐引发。
47. It is concluded that PAM and EC could be used as protective colloid in the emulsion polymerization of vinyl acetate.
实验结果显示,聚丙烯酰胺、乙基纤维素可以作为醋酸乙烯乳液聚合的保护胶体。
48. High conductivity polymer ion conductor in R.T.
室温高导电率高分子离子导体。
49. That means PMMA has changed from polar polymer to non-polar polymer.
对此现象的解释机理提出了“孔洞”与“极性基团断裂”两种假设。
50. The mechanism of drug release from swellable polymer was studied .
对药物从亲水聚合物凝胶系统中释放的机理进行了研究。
51. Nano titanium polymer paint was chosen as the anticor rosive paint.
对防腐涂料进行了筛选,确定采用钛钠米聚合物涂料作防腐涂层。
52. Shandong Weigao Group Medical Polymer Co., Ltd.
山东威高集团医用高分子制品股份有限公司。
53. Changzhou Dupeng Polymer Material Co., Ltd.
常州都朋高分子材料有限公司。
54. Application of photorefractive polymer in electrooptics[J].
引用该论文 刘建静,郝伟,刘锴,唐保军.
55. Thermosensitive Liquid Crystal Polymer Color Image Display[J].
引用该论文 史永基,史建军,史红军.
56. UV-laser induced cross-linking polymerization of PVK-CHI3system[J].
引用该论文 杨君慧,梁伟华,黄南堂,徐积仁,邱家白.
57. Electrooptic effect in dyeooped polymer light waveguide film[J].
引用该论文 马于光,刘式墉,朱江,沈家骢.
58. C.K. Ober, M.L. Hair, J. Polym. Sci., Part A: Polym Chem. Ed. 25 (1987) 1395.
张洪涛、江兵兵、黄锦霞，高分子材料科学与工程18(2002)57.
59. The status of polymer solid alloy was analyzed.
报道了高分子固体合金的研究现状。
60. The development trend of the antistatic polymer materials...
指出抗静电高分子材料的发展趋势。
61. The effect of vinyl acetate(VAc) polymerization of acrylamide(Am) was studied.
探讨了醋酸乙烯酯在丙烯酰胺聚合反应中的影响。
62. The influence of polymer monomer, emulsifier, crosslinking agent, amount of initiator, polymerization craft on the adhesive properties and stability of manufacture are discussed.
摘要研究了聚合单体、乳化剂、交联剂、引发剂、聚合工艺对产品性能及生产稳定性的影响。
63. Poly(ethylene glycol) (PEG) is a hydrophilic polymer which has flexible long chain.
摘要聚乙二醇是一类亲水性长链聚合物。
64. Abstract:Insoluble sulfur is the allotropism body of high polymerization shape of ordinary sulfur and also a high polymer modified variety.
摘要：不溶性硫磺是普通硫磺的高聚合态同素异形体和高分子改性品种，作为一种重要的橡胶硫化交联剂，在轮胎工业中应用潜力巨大。
65. During the course of polymerization process, different amounts of polymer controlled medium and different types of dispersant were carried out.
改变聚合过程中系统调节剂的用量或分散剂的种类,将制得的分散染料微胶囊进行多次转移印花;
66. The polymerization with the improved DQ catalyst is easy to be controlled.
改进后的DQ催化剂用于丙烯聚合时，无明显的反应放热高峰，聚合操作平稳，容易控制。
67. Polymer Coating Technologies of Singapore Pte Ltd.
新加坡涂装技术有限公司。
68. Wuxi Yutian High Polymer Material Co., Ltd.
无锡市裕田高分子材料有限公司。
69. There was a synergism among alkali,surfactant and polymer.
显微照片验证了含驱油剂的乳液存在多重乳状液。
70. Coverage of polymer particles is obviously influenced by emulsifier structure.
显然聚合物胶粒总数受乳化剂结构的影响。
71. Lu Y Y,El-Aasser M S, Vanderhoff J W.Dispersion polymerization of styrene in ethanol[J ].J Polym Sci Polym Phys, 1988,26:1187.
曹同玉,戴兵,戴俊燕,等.分散聚合机理及动力学研究[J].高分子材料科学与工程,1998,14(1):31.
72. University Qualification preferably in Polymer Material field.
有与高分子材料相关专业的本科以上学历。
73. The emulsion polymerization of vinyl acetate with PAM, CMC and EC in place of PVA as protective colloid were studied.
本文尝试用聚丙烯酰胺、羧甲基纤维素及乙基纤维素代替聚乙烯醇作醋酸乙烯乳液聚合的保护胶体。
74. Discher D.E., Eisenberg A., Polymer vesicles, Science, 297: 967.
朱玥珺,谭业邦,张翼,侯昭升.聚合物构筑的囊泡及应用.日用化学工业,35(2):94.
75. Material: Is made by the medical noon-toxic high polymer material.
材料:由医用无毒高分子材料制成.
76. Cleavage of secondary bonds can also be responsible for polymer deterioration.
次价键的分裂往往也能引起聚合体劣化。
77. Polyvinyl fluoridecoatings are based on resin made by the polymerization of a vinylidene fluoride monomer.
氟乙烯树脂涂料是在亚乙烯基氟化物为单体聚合物而成的树脂为基础上制成涂料。
78. JIANGSU JIANGNAN HIGH POLYMER FIBER CO., LTD.
江苏江南高纤股份有限公司。
79. Polymer Insulation Chests: Your Efficiency and Profits!
波利马保温箱：您效率和利润的保证！
80. Frontal polymerization (FP) is a polymer synthesis technique that uses the exothermic reactions to form a self2sustaining wave.
波聚合是指靠自身反应放热产生的热波维持反应进行而将单体转化为聚合物的聚合方法。
