prepreg

prepreg

1. FR-4 prepreg

FR-4半固化片

2. Laser Drillable Prepreg Alternative to Resin Coated Copper Foil for HDI Applications

HDI工艺中取代涂树脂铜箔适合激光钻孔的半固化片

3. No-flow Prepreg (Low Flow Prepreg) and It's Application in Rigid-flex and Heat Sink

不流动(低流动度)半固化片及其在刚挠性板和冷板中的应用

4. no-flow prepreg

不流动性半固化片

5. no flow prepreg

不流动的半固化片

6. moderate-temperature hot-meh prepreg

中温热熔预浸料

7. Keywords moderate-temperature hot-melt prepreg;epoxy resin matrix;curing system;uron derivative;imidazole;

中温热熔预浸料;环氧树脂基体;固化体系;脲类衍生物;咪唑;

8. The property of glass-cloth composite based on a new bismaleimide resin modified by al-lylphenol epoxy was introduced ,and the properties of prepreg and composite have been discussed.

介绍以烯丙基酚环氧树脂改性双马来酰亚胺为树脂基体制得的玻璃布复合材料的性能,并对预浸料及复合材料的性能进行了讨论。

9. ACG Group is one of the most famous companies producing prepreg and composite materials in the world.

先进复合材料集团公司是世界上生产预浸料和复合材料最有名的公司之一。

10. Keywords large tow;carbon fiber;prepreg;hot-melt;

关键词大丝束;炭纤维;预浸料;热熔法;

11. Keywords large tow;carbon fiber;fishing rods;prepreg;hot-melt;

关键词大丝束;碳纤维;预浸料;热熔法;

12. Keywords near-infrared reflectance spectroscopy;principal component analysis;prepreg;resin content;volatile content;

关键词近红外光谱;主成分分析;预浸料;

13. Keywords prepreg;epoxy matrix;implosion;gel time;

关键词预浸料;环氧树脂基体;爆聚;凝胶时间;

14. The properties of plain carbon fabric prepreg were researched using a picture frame shear rig which is(installed) on a mechanical test machine.

利用安装在拉伸试验机上的像框剪切装置,研究了平纹预浸碳纤维机织织物的剪切行为。

15. An optical fiber sensor system, established by our laboratory, was used to measure the pressure change in the normal direction of prepreg layers to monitor the cure process.

利用自行研制的光纤微弯压力测试系统,对树脂基复合材料热压成型过程进行实时监测。

16. Prepreg andlysis after meridianal and zonal shrinkage, cutting and psedo it is necessary to distinguish between meridianal and zonal.

半固化片层不抬后不不不不纬向和不不不纬向关上率不不同，下料和迭层时务必分清不不不不纬向和不不不纬向。

17. Carbon Fiber Cloth or Fabric and Tape,carbon fabric,carbon fiber sheet,prepreg...

又称碳素纤维布,碳纤布,碳布,碳纤维织物,碳纤维带,碳纤维片材(预浸布)等

18. Other prepreg size and style could be available upon request.

可根據客戶要求提供其他尺寸和厚度。

19. But for the tolerance of the prepreg resin content, the prepreg made by the hot-melt method was...

在复合材料常规力学性能方面,一般前者高于后者。

20. A number of MLB, many of the reasons is pressure prepreg, to not distinguish between warp and weft burnedi stacked.

多层不活翘曲的来因，好多不离是层不抬时半固化片的不不不不纬不不不纬向不有分清，安迭不收而变不败的。

21. How to distinguish between warp and weft? spools of prepreg rolled uphis direction is meridianal, and the width is zonal;

如何辨别不不不不纬不不不纬向？不败卷的半固化片不收拢的标的目的是不不不不纬向，而宽量标的目的是不不不纬向；

22. Its subject coverage includes: prepreg molding and lay-up processes;

它的主题涉及的范围包括 ：防护服装和装甲镀层；

23. The optical fiber sensor is embedded in the prepreg and the change of output voltage can reflect the change of compacting pressure between fibers and the compacting degree of composite laminates.

实验结果表明,该系统除了能较好地反映垂直层板方向压力变化外,还能提供加压过程树脂流动状态及层板密实达到稳态均匀时间的相关信息。

24. Based on above, studies on the storage life of P SMC prepreg were carried too, and in the end , a suitable thickening system fitted with industrial produce was achieved.

并在此基础上，对P-SMC的贮存期进行了研究，确定了与工业生产相适应的复合增稠系统。

25. JiaTong carbon fiber prepreg co,ltd.located in Dezhou ,china which is one of the best producers of high quality and advanced composite prepreg materials.

德州佳同碳纤维布有限公司位于山东省德州.是国内优质复合材料的生产厂家.

26. The analytical expression of thermal stress of the laminated glass containing soft prepreg layer in middle was derived.

推导了含软胶夹层梁的热应力表达式。

27. The testing method and standardization of carbon fiber and its fabric, prepreg, CFRP are illustrated both at home and abroad, for some testing units reference.

摘要论述了国内外碳纤维及其织物、预浸料、复合材料的测试方法及标凖化，供国内有关测试单位及专业技术人员参考。

28. Lighter and thinner prepreg readies pc board for future demands

更轻更薄的聚脂胶片为满足未来印制线路板的要求做好了准备

29. Two testing panels above were made in hard molding prepreg tape winding technique and its manufacturing process were described.

本文根据具体情况用硬模纤维预浸带缠绕的方法制造出上述设计的两块试验板，并给出工艺流程。

30. In this paper the survey of ACG Group is briefly introduced.The low temperature moulding prepreg technology and it's application are emphasized.

本文简介炭集团公司概况,重点介绍低温成型预浸料技术及其应用。

31. The article describes prepreg technology of fiber reinforced thermoplastics(FRTP) systematically.

本文系统地介绍了纤维增强热塑性复合材料的预浸渍技术。

32. The study progress in epoxy resin and curing system for moderate-temperature hot-melt prepreg is reviewed.

本文综述了中温热熔预浸料用环氧树脂体系,包括国内外基体树脂及固化体系的发展现状;

33. Tensile stress was applied to the fiber prepreg to modify the residual stresses in ARALL during curing.

本文采用预应力法调整了纤维-铝合金胶接层板的残余应力;

34. This paper introduced the requirements of resin in automated tape laying technology, compared the performances of prepreg tape based on epoxy resin with bismaleimide resin.

本论文介绍了自动铺带技术对预浸带树脂要求，分析比较了以环氧树脂和双马来酰胺树脂为基体的预浸带性能。

35. Manufacture of Thermoplastic Matrix Composite Stiffened Panel Using Flexible Co-woven Prepreg

柔性混编预浸料制造热塑性复合材料加筋结构

36. flexible prepreg

柔性预浸料

37. The epoxy index and insoluble matter content of prepreg were analyzed in order to study the reladonship between physicochemi-cal changes and storage period.

测定了环氧树脂/芳纶纤维预浸料的固化度(红外法)、不可溶分含量及其复合材料的力学性能与储存时间的关系。

38. The electromagnetic interference shielding effectiveness of CF/ varnish and CF/epoxy prepreg are determinated.

测定了碳纤维/清漆混合涂料及碳纤维预浸带对电磁辐射干扰的屏蔽效率。

39. A distinction can be made between wet and dry prepregs, where the wet prepregs are often known as “indoor prepreg”, since they are produced at the workshop of the component manufacturer.

湿预浸料和干预浸料有一区别，湿预浸料还经常被称为室内预浸料，因为都是部件制造商在车间生产的。

40. STUDY ON INFLUENCING ASPECTS OF SURFACE STATE AND IMPROVEMENT MECHANISM OF CARBON FIBER PREPREG TAPE

炭纤维预浸带表面状态的影响因素及改进机理研究

41. ablative prepreg

烧蚀性预浸料

42. Keywords thermoplastic matrix composite;flexible prepreg;curved surface forming;co-consolidation;

热塑性复合材料;柔性预浸料;曲面成型;共固结;

43. hot-melt prepreg machine

热熔预浸机

44. Keywords epoxy resin;aramid fiber;Prepreg;quality control;curing degree;insoluble matter content;

环氧树脂;芳纶纤维;预混料;质量控制;固化度;不可溶分含量;

45. epoxy prepreg

环氧树脂预浸料

46. glass cloth prepreg

玻璃布预浸料

47. Polyester Textilglass Roving Prepreg UR

玻璃束聚酯预浸渍物

48. Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction

用索氏提取法测定复合材料预浸料成份含量的标准试验方法

49. Test Method for Measurement of Resin Content and Other Related Properties of Polymer Matrix Thermoset Prepreg by Combined Mechanical and Ultrasonic Methods

用联合机械和超声波法测量聚合物点阵热固性预浸渍树脂含量及其他有关性能的试验方法

50. Keywords vacuum-bag cure;prepreg;epoxy;carbon fiber composite;non-autoclave;

真空压力成型;预浸料;环氧;碳纤维复合材料;非热压罐;

51. A novel moulding process for the production of CFRP tube was presented, which combined prepreg technology and autoclave moulding technology.

研究了一种新型的CFRP(碳纤维复合材料管)成型工艺方法。

52. The result shows that the shear properties of the fabric prepreg were similar to those of the pure fabric,which has different properties during different shear stages.

研究发现,预浸碳纤维织物的剪切行为与织物的分阶段剪切行为类似。根据实验结果,分两个不同剪切阶段建立了预浸碳纤维织物的二维剪切性能模型。

53. Keywords carbon fiber;fabric;prepreg;CFRP;testing method;standardizati

碳纤维;织物;预浸料;碳纤维增强塑料;复合材料;

54. Engineering design study of carbon fiber and prepreg plant

碳纤维及预浸料工程设计探讨

55. Keywords carbon fiber reinforced thermoplastics;prepreg;processing conditions;

碳纤维增强热塑性塑料;预浸料;成型工艺;

56. Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg

碳纤维环氧树脂半固化片凝固时间的试验方法

57. Keywords IR;epoxy resin;prepreg;quality control;

红外光谱;环氧树脂;预浸料;质量控制;

58. A fiber placed composite, especially with fiber steering, has more complex internal structure than a laminate laid up from unidirectional prepreg tapes.

纤维键接复合材料,特别是带有转向纤维的复合材料比普通层压板具有更加复杂的内部结构。

59. A suspension-melting method was chosen to produce prepreg of carbon fiber reinforced polyphenylene sulfide.

经过筛选，研制出了生产碳纤 维增强聚苯硫醚予浸带的悬浮-熔融法。

60. As raw material, the prepreg is important for the application and development of the automated fiber placement technology.

自动铺丝预浸纱作为自动铺丝工艺用原材料,对于自动铺丝技术的应用和发展具有重要的意义。

61. Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification

航空和航天。单向碳纤维环氧树脂制半固化片。交货技术条件

62. Aerospace; textile glass, preimpregnated filament glass cloth from E-glass (Prepreg), technical specifications

航空航天.E型玻璃丝制成的纺织玻璃纤维增强预浸渍长丝织物(预浸渍体)。技术规范条件

63. The review shows the technical points of(epoxy) hot-melt prepreg on the(reasonable) combination of resin matrix,matching of curing agents and(accel...

表明环氧树脂热熔预浸料研制的技术关键是选择合理的树脂体系组合,有较长潜伏期的固化剂和促进剂的匹配及合适的催化剂。

64. Improving the Wetting Property of Epoxy Resin Glass Fabrics Used in CCL--The Method of Producing Non-bubble 7628 Prepreg

覆铜板用环氧玻璃纤维布含浸性改善--无气泡7628半固化片生产方法

65. Experiments showed that it is feasible to fabricate PPS/CF composite prepreg with a suspension melting method.

试验证明，用悬浮-熔融法 生产聚苯硫醚碳纤维予浸带是可行的。

66. The book also considers forming technologies for various composite material forms including thermoset and thermoplastic prepreg, molding compounds, and composite/metal laminates.

该书还认为成形技术，为各种复合材料的形式，包括热固性和热塑性预浸料，成型化合物，并复合/金属层板。

67. It can not only measure the prepreg's resin content accurately and sensitively,but alsoautomatically adjust the process parmeters,assuring uniform resin distribion.

该系统能够跟踪预浸过程，准确、灵敏地反映树脂含量的变化，并能根据要求及时调整工艺参数，保证预浸料树脂均匀分布，有利于工艺过程的连续化、自动化。

68. The prepreg had been used in helicopter secondary structure.

该预浸料已用于直升机次承力结构。

69. Application of near infrared diffuse reflection spectrum in on-line determination of prepreg cloth quality index

近红外漫反射光谱技术在预浸布质量指标在线测定中的应用

70. Research of large tow carbon fiber prepreg to prepare fishing rods

钓鱼竿用大丝束碳纤维预浸料的研制

71. prepreg tape laying

顸浸带铺放

72. Keywords impregnating technology;glass cloth prepreg;mechanical properties;the climbing drum roll peel properties;

预浸工艺;玻璃布预浸料;力学性能;滚筒剥离性能;

73. Prepreg tape

预浸带

74. Keywords Prepreg tape;Resin content;Uncontinuous examination;On-line monitoring;

预浸带;树脂含量;间断检测;在线监测;

75. Keywords prepreg;hot melt impregnation;process parameter;

预浸带;热熔预浸;工艺参数;

76. Composite Repair Method on Commercial Aircraft: A Study on the Usage of Prepreg and Wet Lay Methods

预浸带法及湿层法在复合材料维修上的对比研究

77. The steadiness of resin content in prepreg is the key factor to ensare the quality of the finished compos-ite.

预浸带的树脂含量稳定性是保证复合材料制品质量的重要因素。

78. prepreg moulding

预浸成形法

79. Keywords prepreg;near-infrared reflectance spectroscopy;resin content;pre-curing deg ree;volatile content;

预浸料;近红外光谱;树脂含量;挥发份含量;预固化度;

80. Prepreg is a reinforcing material pre-impregnated with reaction resin compound, and can be worked without having any more resin compound added.

预浸料是增强材料提前浸渍在反应树脂混合物中，不必再增加反应树脂混合物就可反应。