resinic

resinic

1. ABS resin is a kind of thermoplastic resin with excellent allround properties.

ABS树脂是一种综合性能优异的热塑性树脂。

2. HIMER is the resin component of toner used in copiers and printers.

HIMER是用于影印机和打印机的调色剂树脂组分。

3. HR-189 is orthophalic, low viscosity unsaturated polyester resin.

HR-189船用不饱和聚酯树脂。

4. M. = Polyoxy Methylene Resin (We can dye any color for you!

M. = 聚甲醛树脂（我们可以为您染任何颜色！）

5. NBR or XNBR as raw rubber and phenolic resin was blended.

NBR和XNBR都可作为生胶与酚醛树脂共混。

6. RC 1451 is a acrylic resin polymer, polyurethane and auxiliaries compound.

RC 1451是一支聚氨酯的综合树脂。

7. The primary and secondary windings are insulated by epoxy resin.

一、二次绕组均浇注在环氧树脂内，绝缘性能优良，耐潮湿。

8. It's a modified alkyd resin paint. Resistant to sunlight, sea water and oil.

一种改性醇酸树脂漆。耐日晒,耐海水,耐油。

9. It's a rust-inhibiting coating with petroleum resin.

一种由石油树脂组成的防锈涂料。

10. A plastic made from such resin.

三聚氰氨树脂三聚氰胺树脂制得的塑料

11. SHANGHAI CHUANGFENG RESIN FOR SPECIAL PURPOSE CO., LTD.

上海创丰特殊树脂有限公司。

12. Shanghai Xinhua Resin Manufacturing Co.

上海新华树脂厂。

13. Opacity is due to crazes in the resin .

不透明是因树脂中产生裂纹。

14. A painting done in acrylic resin.

丙烯画用丙烯酸树脂完成的图画。

15. A paint containing acrylic resin.

丙烯酸树脂漆含丙烯酸树脂的涂料

16. Acrylic lacquers are a blend of resin from the acrylic family.

丙烯酸漆是来自丙烯酸家族中的树脂的混合物。

17. It is the largest manufacturer of CNSL friction resin in the world.

为环氧市场提供了一系列基于腰果壳提取物改性的酚醛胺环氧固化剂、反应型改性物和树脂。

18. Diethylenetriamine will swell the resin .

二乙烯三胺将使树脂膨胀。

19. Dibenzylidene sorbitol is known as a gelling agent for polyolefln resin.

二亚苄基山梨醇是一种聚烯烃树脂的成核剂。

20. From three o'clock onward they would be burning resin.

从3点钟以后，它们就燃烧着松香。

21. They began to use resin version or laser engraving to seihan.

他们开始使用树脂版或者用激光雕刻来制版。

22. It's based on hydrocarbon resin.

以烃类树脂为基料制成的耐热铝粉漆。

23. Users should be cleaning skin by soap if the resin was bonded on it.

使用后，如皮肤沾附本剂，应以肥皂清洗。

24. Resin acid was hydrogenated used nano-Ni as catalyst.

使用纳米镍催化剂进行树脂酸的氢化反应。

25. The resin properties are characterized by FTIR, DMA, DTA, TGA, SEM.

借助于FTIR、DMA、DTA、TGA、SEM等测试分析手段对树脂的性能进行了表征。

26. Gloss, Fullness, Adhesion, Hardness, Compatible with Alkyd resin Fast dry.

光泽,膜厚感,密著,硬度,与醇酸树脂相容性,速乾

27. Type:Whole synthetic resin(QS),Composite(HH),and Antiskid without pellet(WT).

全塑（QS）型、混合（HH）型、无颗粒防滑（WT）型等各种类型。

28. Study on resin exudation in Larix dahurica Turcz.

兴安落叶松脱脂研究的现状及发展趋势。

29. Thereinto, FEP resin which covers wire and cable will be colored.

其中，传统的白色FEP绝缘电线电缆已有被彩色线缆替代的趋势。

30. Besides, it can be lubricant and release as styrene resin, PF resin etc.

具有抑制初期着色、耐硫磺污染、润滑性好的优点。

31. Tough and chemical resistance of epoxy resin.

具有环氧树脂的坚硬性耐化学品性。

32. The series of STERNGTH diamond grinding whee for glass are made by high quality diamond, relevant metallic bond and resinic bond.

具有较高的磨削效率；

33. Reduction of resin content of RCS and gas defects.

减少树脂量，降低铸件发气导致的缺陷。

34. In General, when using several resin intersolubility.

凡是来说，搁置几栽树脂时互溶性不不不差。

35. More than 99% of vanadium was absorbed on resin from pulp.

利用该工艺,树脂对浆液中钒的吸附率大于99%。

36. The encasing resin was thicker.

包覆树脂较厚。

37. Standard Specification for Polycarbonate Resin for Medical Applications.

医疗设备用聚碳酸酯树脂

38. One-piece machined cage of fabric reinforced phenolic resin (g).

单片机削纤维增强酚醛树脂保持架(g)

39. We supply various of resinic crafts,plush toys,key chains,bags,non-woven bags,cell phone holders,bel...

发布者：萧善缘所在地：浙江金华市行业：礼品、工艺品、饰品职位：经理工作年限：

40. Expandable polystyrene resin and other products.

可发性聚苯乙烯树脂,苯酚及其它。

41. Test data for chemical resistance of the epoxy resin shall be submitted.

台面抗化学腐蚀的数据将提供给客户。

42. Table-board: using solid physiochemical board or epoxy resin table-board.

台面板：采用实芯理化板或环氧树脂板。

43. Specification for Fluoropolymer Resin Heat-Shrinkable Tubing (10.

含氟聚合物树脂热缩管件规范(10。

44. Monomer-free unsaturated polyester resin with high softening point.

固体不饱和聚酯树脂，具有较高的软化点。

45. The interface between the resin and the filler or reinforcement is of utmost importance.

在树脂与填料或增强材料之间的界面是极其重要的。

46. After the fiberglass resin set up, I assembled everything on the base.

在玻璃纤维树脂成立，我组装一切的基础上。

47. Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings (08.

增塑的环氧树脂气压管和配件规范(08。

48. The shell mould-shapedby glass fiber reinforced and unsaturated ployster resin.

外壳采用玻璃纤维增强不饱和聚酯树脂压制而成,具有。

49. How does the supplier control resin content?

如何控制树脂砂含量?

50. Actual figure dependent on base resin and filler.

实际的数值依赖于基础树脂和填充物。

51. The result showed that IPN method was effective in toughening epoxy resin.

实验结果表明，用IPN方法增韧环氧树脂效果良好。

52. WATER TAP: Taiwan SAN, made of copper, the surface coated with epoxy resin.

实验龙头：台湾SAN，铜制，表面环氧树脂喷涂。

53. For this procedure, you'll need a hot glue gun and/ or epoxy resin.

对于这一个方法，你需要粘合剂喷枪或者环氧基树脂树脂。

54. The modified resin was applied to brake block, and the frict.

将桐油改性酚醛树脂制成刹车片,测试其摩擦磨损性能。

55. Nano-Ni was first used as catalyst for disproportionation of resin acid.

将纳米镍催化剂首次应用于树脂酸的歧化反应中。

56. Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.

将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。

57. Urea and its monomeric species were as scavenger of formaldehyde in the resin.

尿素及其衍生物对 于该类树脂而言，仅仅起到的是甲醛捕捉剂的作用。

58. Epoxy Resin Division of Baling Petrochem.

巴陵石油化工有限责任公司环氧树脂事业部。

59. A resin derived from methacrylic acid.

异丁烯酸脂系树脂从异丁烯酸中提炼的一种树脂

60. Effect of Phenolic Resin on Laser Ignition of B/KNO3[J].

引用该论文 叶迎华,沈瑞琪,戴实之.

61. A brown-to-black, soft, elastic hydrocarbon resin.

弹性沥青一种深棕色，柔软可弯曲的烃树脂

62. Anchor resin cut-off wheels are reinforced with fiberglass for safe operation.

强化树脂黏结切割砂轮使用纤维补强网作业安全性高。

63. The resin had good heat storage stability and pigment had widely wettability.

得到的树脂具有良好的热储稳定性,颜料广泛润湿性。

64. A Mature Polyamide Resin Producer and Exporter.

成熟的聚酰胺树脂生产商和出口商。

65. This statues we need statues made of pewter/or poly resin,both on one socket.

我们需要蜡或者塑料做的雕像，这些雕像是插在一个孔上面的。

66. The acoustic emission (AE) of ABS, PS resin and PP/PE composition is reported.

报道了ABS、PS、PP/PE 共混物的声发射研究。

67. New process on phosphorus curing agents of epoxy resin are reviewed.

摘要综述了含磷环氧树脂固化剂研究的新进展。

68. Novolac modified solid epoxy resin for rebar coatings.

改性的酚醛树脂,用于螺纹钢涂料。

69. Xinxiang resin factory abundant snow now in where?

新乡树脂厂丰雪现在在哪里?

70. Methods Laborite testing and clinic observation on the fluoride-added resin.

方法对自制加氟自凝树脂进行横向弯曲、体外和体内释放试验。

71. GGG toys esp. resin casts have been diminished for several years.

日本大阪有什麽地方多勇者王的玩具卖呢?

72. It's a modified acrylic resin based coating.

是以改性丙烯酸树脂为基料制成。

73. To show through a layer of paint, as a stain or resin in wood.

显色通过一层涂料来显示，如显示树上的色斑或树脂

74. The organo functional groups will react with the resin .

有机官能团将与树脂反应。

75. Experience in IR equipment analysis in resin or paint is highly preferred.

有树脂或涂料红外分析经验者特别优先考虑。

76. The Resin Web Server can be installed as an Windows service.

服务器可以被安装成为。

77. The article describes the control of resin content and GRP product quality.

本文叙述了手糊玻璃钢制品的含胶量控制与质量的关系。

78. The properties of vinyl ester resin at low temperature is discussed.

本文就乙烯基酯树脂在低温下的性能作一探讨。

79. A study was made on the EAM resin gel property and cure property by DSC and IR.

本文研究了EAM树脂的凝胶特性 ,用DSC、IR研究了树脂的固化特性。

80. Resin cures with the help of a catalyst.

松脂可以在催化剂的帮助下凝固变硬。