sawblade
sawblade
1. Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.
介绍一种用动态性能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。
2. low temperature electroplated synthetic diamond sawblade
低温电镀人造金刚石锯片
3. You can use your sawblade as close range melee attacks.
你可以用你的锯片进行近战攻击。
4. The significance of using thin type circular diamond sawblade is to reduce cutting width,thus lessening stone resources waste.
使用薄型金刚石圆锯片的意义在于减小切缝宽度,从而降低石材资源浪费。
5. For 18 years, the sawblade of production is sold toward American, German a lot of countries such as Russia, Japan and France, have gotten foreign traders approve.
十八年来，生产的锯条销往了美国、德国、俄罗斯、日本、法国等好多国家，得到了外商们的认可。
6. circular sawblade
圆锯片
7. The multi-formation of chips often collects into groups and felts on the surface of concrete sawing area or segment, which will make the sawblade easy to be loaded under the extrusion of cement chips and diamond grits.
在粘性水泥粉屑以及金刚石磨粒的挤压作用下，多种形态的切屑易粘结成团，并粘附到混凝土锯切表面和锯片节块上而导致锯片堵塞。
8. Saw-guide is a device used to guide sawblade in bandsaws.
导锯器是带锯机切削机构中的锯条导向装置。
9. Saw-guide is a device used to guide sawblade in bandsaws.Working principle,advantages and calculating method for pressing-out type,air-static saw-guide are presented.
导锯器是带锯机切削机构中的锯条导向装置。介绍压出式空气静力导锯器的原理、优点及其压出值的计算方法。
10. Keywords bandsaw;sawblade of bandsaw;saw-guide;
带锯机;带锯条;导锯器;
11. Study on torsional vibration frequency of board spring sawblade strain system of band - saw mill
带锯机板式弹簧张紧系统锯条扭转振动频率的研究
12. sawblade of bandsaw
带锯条
13. Thermal Deformation of a Circular Sawblade with Slots
开槽圆锯片热变形的试验研究
14. Development of a New Kind of Diamond Circular Sawblade withComposite Matrix
新型复合基金刚石锯片的开发
15. Keywords Woodworking circular sawblade;CAD system;Program;
木工圆锯片;CAD系统;程序;
16. carbide-tipped circular sawblade for wood working
木工硬质合金圆锯片
17. The effects of the number, length and width of the slots on the thermal deformation of a circular sawblade were investigated in this paper.
本文研究了圆锯片径向槽的数量、长度、宽度对圆锯片热变形的影响。
18. THE MACHINE TOOL IS SUITABLE FOR THE INDUSTRY OF SAWBLADE, TRACTOR, AUTOMOBILE, BEARING, ETC.GRINDING THE PLANE OF LOT-SIZE SPARE PARTS.
本机床特别适用于锯片、汽车、拖拉机、轴承和机床行业使用。
19. Machines: Horizontal panel sizing machines that allow the vertical adjustment of the scorer in relation to the panel sizing sawblade kerf.
机器：可以调节锯轴的卧式裁板锯。齿型：左右斜齿，锥型齿，正前脚设计。
20. The well-sealed safeguard of sawblade prevents the cutting bits from flowing everywhere.
机头自动回转，双向定位、夹紧，准确且稳定。锯切时密封好，有效防止锯屑四逸。
21. International market competition becomes so heat nowadays, and produces high quality and benefit sawblade is our eternal pursuance.
生产出“高质量，高效益”的锯片是现代企业界共同追求的目标。
22. Sawblade for ripping and cross cutting of softwoods and hardwoods up to 50mm and single or multiple chipboard panels up to 60mm with good finish.Use on table saws.
用于切割各种塑料双贴面刨花板的预划槽，以消除贴面崩裂现象。锯片宽度从2.8毫米可调到3.6毫米。
23. It was also found that increasing the length of the slots tended to make the sawblade more stable, whereas increasing the width of slots resulted in increased thermal deformation.
相同条件下,径向槽相对较长的锯片不易发生热变形;径向槽宽度的增加可引起锯片热变形的加剧。
24. Keywords stone sawblade;diamond segment;wear;
石材切割锯片;金刚石刀头;磨损;
25. Manufacturing Technology of SHODA Carbide Circular and Ultra-thin Sawblade
硬质合金圆锯片和超薄锯片的设计制造
26. Sawblade for cutting exotic and abrasive woods, chipboard, MDF panels up to 50 mm with a good finish. Use on table saws.
硬质合金圆锯片，切割中密度板和刨花板。锯片适用于切割50毫米以下热带木、刨花板、中密度板，切割质量精佳。
27. Sawblade for cutting in combination with scorer with excellent finish, on coated chipboard, with max. kerf 40mm.
硬质合金圆锯片，切割各种贴面板。
28. Sawblade for ripping dry softwoods and hardwoods up to 60 mm thick with loose konts. Long life sawblade with excellent results. Use on multirip machnes or table saws.
硬质合金多片圆锯片，锯片带交叉斜齿，含防反弹设计，适用于切割60毫米以下各种干、软、硬及有松节的木材，多片锯床合用。
29. Sawblade for cross vutting of softwoods, hardwoods, and exotic woods up to 60 mm with excellent finish. Also use for single or multiple chipboard panels. Use on table saw.
硬质合金通用圆锯片（横截），锯片带交叉斜齿，适用于横截60毫米以下各种软、硬木和热带木，也可切割单张或成叠的刨花板。
30. Sawblade for ripping and cross cutting with medium finish of softwoods and hardwoods up to 50 mm and sinigle or multiple chipboard panels up to 60 mm with good finish.Use on table saws.
硬质合金通用圆锯片（纵切横截），锯片带交叉斜齿，适用于开条和横锯50毫米以下各种干燥软、硬木和厚度不超过60毫米的刨花板。
31. Sawblade for ripping with medium finish of softwoods and hardwoods with maximum thickness of 50 mm and single or multiple chipboard panels up to 60-100mm.Use on table saws or miter saws.
硬质合金通用圆锯片（纵向切割），锯片带交叉斜齿，适用于纵向切割干燥软、硬木，厚度不超过50毫米，单张或层叠的刨花板切割，厚度不超过60-100毫米。
32. Keywords Narrow slot;Carbide tipped circular sawblade;Noise;Finite element;Natural frequency;Mode vibration shape;
细缝;硬质合金圆锯片;噪声;有限元;固有频率;模态振型;
33. It is shown that the diamonds with coatings can enhance the service life of the sawblade and obtain a maximum cutting speed at lower concentration of diamonds.
结果表明:金刚石镀膜不仅能够提高锯片的切割寿命,而且可以在降低金刚石浓度的情况下达到最大切割速度。
34. Automatic oil lubrication ensures burr-free cutting quality and longer sawblade life.
自动喷油，切面无毛边，锯片更耐用；
35. Keywords thin type circular diamond sawblade;sawblade core;diamond segment;structural design;performance comparison;
薄型金刚石圆锯片;结构设计;综述;性能对比;锯片基体;金刚石刀头;
36. The structural design of thin type circular diamond sawblade mainly included designing of sawblade core and diamond segment,both of them were discussed in this paper.
薄型金刚石圆锯片的结构设计主要包括锯片基体与金刚石刀头的设计,在文章中对两者均作了论述。
37. Discussion on structural design of the thin type circular diamond sawblade
薄型金刚石圆锯片结构设计探讨
38. thin circular diamond sawblade
薄锯片
39. Keywords thin circular diamond sawblade;high-speed sawing;sawing forces;
薄锯片;高速锯切;锯切力;
40. Results found that under the same condition, a circular sawblade with 5 slots showed the best thermal stability.
试验结果发现,三者对圆锯片的热变形均有较大的影响:当开5个径向槽时圆锯片的热变形最小;
41. Application of the Thin-kerf Sawblade in Cutting of Thin Solid Wood Board
超薄圆锯片在锯切实木薄板中的应用
42. The performance comparison between thin type circular diamond sawblade and conventional one demonstrated that the former is superior to the latter.
通过薄型金刚石圆锯片与普通金刚石圆锯片的性能对比,证实了前者的性能优于后者。
43. diamond sawblade
金刚石圆锯片
44. Keywords diamond sawblade laser welding system;
金刚石圆锯片;激光焊接系统;
45. Keywords diamond circular sawblade matrix granite wear cutting efficiency;
金刚石圆锯片;胎体;花岗石;磨损;切削效率;
46. Set-up and solution for calculating stress model of diamond circular sawblade
金刚石圆锯片应力计算模型建立及求解
47. Keywords diamond sawblade;stone materials;mechanism of wear;matrix composition;segment design;
金刚石锯片;石材;磨损机理;胎体成分;刀头设计;
48. Keywords diamond sawblade braise bubble disfigurement diamond graphitelization;
金刚石锯片;钎焊;焊缝缺陷;冒泡;金刚石石墨化;
49. Diamond sawblade behaviour is determined by the wear of diamond segments in the process of cutting stone materials.
金刚石锯片在锯切石材的过程中,刀头的磨损状况决定锯片的工作状况。
50. Analysis of the wear progression in cutting stone materials with diamond sawblade
金刚石锯片锯切石材过程中的磨损分析
51. Keywords diamond sawblade wearing form sawing force;
金刚石锯轮;磨损形式;锯削力;
52. Keywords diamond sawblade;granites;the sawing rate;todlife equation;production cost;R-C characteristic curve;
金刚石锯轮;花岗岩;锯切率;锯轮寿命公式;生产成本;R-C特性曲线;
53. EFFECTS OF Ti - COATED DIAMOND ON PROPERTY OF DIAMOND SAWBLADE
金刚石镀Ti对金刚石锯片性能的影响研究
54. teeth forming machine for band sawblade
锯条开齿机
55. sawblade for cross cutting of sofrwoods,hardwoods,snd exotic woods up to 60 mm with excellent finish.also,use for single or multiple chipboard panels.use on table saw.
锯片带交叉斜齿，适用于切割30毫米以下各种塑料单、双贴面刨花板、胶合板、层压板。切割质量精佳，配置于推台锯。
56. Sawblade for ripping and cross cutting of softwoods and hardwoods up to50 mm and singlo or multiple chipboard panels up to60 mm with good finish. Use on table saw .
锯片带交叉斜齿，适用于开条和横锯50毫米以下各种干燥软、木和厚度不超过60毫米的刨花板，切割质量精佳，配置于推台锯。
57. Sawblade for ripping and cross cutting of softwoods and hardwoods up to 50 mm and singlo or multiple chipboard panels up to 60 mm with good finish.Use on table saw.
锯片带交叉斜齿，适用于开条和横锯50毫米以下各种干燥软、硬木和厚度不超过60毫米的刨花板，切割质量精佳，配置于推台锯。
58. Fully guarded sawblade allows safe loading and unloading of workpieces.
隐藏式锯片可以很安全地上下工作；
59. HSS sawblade
高速钢锯片
