smtp
smtp
1. Valid input for the DomainName parameter is a Simple Mail Transfer Protocol (SMTP) domain.
DomainName参数的有效输入是一个简单邮件传输协议(SMTP)域。
2. FromAddress The Simple Mail Transfer Protocol (SMTP) address of the sender of a message.
FromAddress邮件发件人的简单邮件传输协议(SMTP)地址。
3. HELO is the older SMTP verb that is defined in RFC 821.
HELO是RFC 821中定义的旧版SMTP命令动词。
4. HTTP, FTP, and SMTP are types of transport tModels.
http、FTP 和 SMTP 是传输 tModel的几种类型。
5. IIS hosts the SMTP service, which implements the central transport engine of Exchange 2003.
IIS驻留SMTP服务,该服务实现Exchange 2003的中心传输引擎。
6. Log-Type: The value of this field is either SMTP Receive Protocol Log or SMTP Send Protocol Log.
Log-Type:此字段的值是SMTP接收协议日志或SMTP发送协议日志。
7. The Mailer sample allows you to fill in a form, attach some files, and send the resulting message through SMTP e-mail.
Mailer示例使您可以填充表单,附加一些文件,然后通过SMTP电子邮件发送得到的邮件。
8. The MIME protocol lets SMTP transmit multimedia files including voice, audio, and binary data across TCP/IP networks.
MIME协议让SMTP实现了声音、音频和贯穿于TCP/IP网络的二进制位的多媒体文件的传输。
9. SMTP (Simple Message Transfer Protocol) is the base of Email transfer.
Simple Message Transfer Protocol（简单邮件传输协议，以下简称SMTP）是网络邮件传输的基础。
10. The primary goal of avast! SMTP Server Edition is to effectively filter all SMTP traffic.
SMTP Server Edition的主要目的是有效过滤所有SMTP通讯。
11. SMTP StoreDriver This event occurs when a message must be saved to disk or to the Exchange store.
SMTP StoreDriver:邮件必须保存到磁盘或Exchange存储时,发生此事件。
12. SMTP Transport OnDnsResolveRecord This event occurs when a domain name must be resolved to an IP address.
SMTP Transport OnDnsResolveRecord:域名必须解析为IP地址时,发生此事件。
13. An SMTP session receives an initial set of permissions (anonymous).
SMTP会话接收初始权限集(匿名)。
14. The SMTP protocol does not offer much in the way of security and does not require any authentication.
SMTP协定没有提供太多的安全机制，也没有要求任何的认证。
15. The SMTP protocol is used for the transmission of e-mails.
SMTP协议是用于电子邮件的传输。
16. The SMTP protocol is used for the transmission of e-mails. SMTP takes care of sending your email to another computer.
SMTP协议是用于电子邮件的转换的。SMTP负责将你的电子邮件发送到其他的计算机上。
17. This is not the case with the SMTP protocol.
SMTP协议的情况就不是这样了。
18. SMTP can only transmit pure text. It cannot transmit binary data like pictures, sounds or movies.
SMTP只能传输纯文本。它不能传输像图片、声音或电影这样的二进制位数据。
19. SMTP can keep 1,000 messages in the queue open at any particular time, closing old messages as new ones arrive.
SMTP可在任何特定时刻使队列中的1,000封邮件处于打开状态,并在新邮件到达时关闭旧邮件。
20. When SMTP queries DNS, it always queries for MX records first.
SMTP在查询DNS时,总是先查询MX记录。
21. SMTP is a network protocol that is designed to move electronic mail messages across a network to a destination server.
SMTP是一个网络协议,旨在通过网络将电子邮件信息传递到目标服务器。
22. The server name of the SMTP server.
SMTP服务器名称。
23. The counts can be used by SMTP servers and mail user agents to detect and reject bulk mail.
SMTP服务器和邮件用户代理可以使用这个校验来检测和拒绝批量邮件。
24. The SMTP server delivers the message to one of the messaging servers.
SMTP服务器把消息传递到一个消息服务器。
25. The SMTP service defines port 25 as its standard port.
SMTP服务将25端口指定为其标准端口。
26. SMTP gateways are frequently used for distribution list expansion.
SMTP网关常被用于扩展通讯组列表。
27. Every message that is received by an SMTP gateway is saved to a disk.
SMTP网关收到的每封邮件都要保存到磁盘。
28. An SMTP gateway's write buffer is 32 KB.
SMTP网关的写入缓冲区为32 KB。
29. SMTP gateways require lots of disk resources; at least seven disk writes are required for each message queued.
SMTP网关要求大量的磁盘资源;每封排队的邮件都至少要求七次磁盘写入。
30. The property settings of the SMTP virtual server control inbound mail and, to a lesser degree, outbound mail settings.
SMTP虚拟服务器的属性设置控制着入站邮件以及出站邮件设置(程度较低)。
31. SMTP requires data for transport to be in 7-bit US-ASCII characters with lines no longer than 1000 characters.
SMTP要求传输的数据为7位US-ASCII字符,并且行长不超过1000个字符。
32. Your SMTP mail server could not start a secure connection.
SMTP邮件服务器无法启动安全连接。
33. System.Net.Mail - classes used to send electronic mail to a Simple Mail Transfer Protocol (SMTP) server for delivery.
System.Net.Mail--用于将电子邮件发送到简单邮件传输协议(SMTP)服务器进行传送的类。
34. VBScript code if JMail.Send(smtp) then response.
Write("邮件发送成功") else response.
35. X-Sender: This X-Header replaces the From: message header field requirement in a typical SMTP message.
X-Sender:此X-Header取代典型的SMTP邮件中的From:邮件头字段要求。
36. A simple mail server to achieve the SMTP, POP3, realized the mail!
一个简单的邮件服务器，实现了SMTP,POP3，实现了邮件收发！
37. No SMTP addresses contained within the specified subdomains are rewritten.
不会重写指定子域中包含的任何SMTP地址。
38. You do not need to define the built-in File and SMTP delivery protocols.
不需要定义内置文件传递协议和SMTP传递协议。
39. Option selected for character set in the SMTP Settings specified in the global settings of Central Administration.
中心管理的全局设置中SMTP设置的可选字符集选项。
40. To accomplish this functionality, the SMTP component includes several subcomponents.
为了完成此功能,SMTP组件包含几个子组件。
41. SMTP must already be configured on the server in order for this code example to work.
为使此代码示例正常工作,必须在服务器上配置SMTP。
42. Add a new address space for the SMTP domain named Contoso. Com that has an address space cost of 5.
为名为Contoso.com的SMTP域添加一个新地址空间,地址空间开销为5。
43. You can also use Network Load Balancing to balance SMTP traffic across multiple SMTP gateway servers.
也可使用网络负载平衡来对通过多个SMTP网关服务器的SMTP通信进行平衡。
44. Event handler does not catch or handle the SMTP error from the e-mail system.
事件处理程序不会捕获或处理源自电子邮件系统的SMTP错误。
45. Accept only e-mail messages from the Simple Mail Transfer Protocol (SMTP) address of the Microsoft Exchange contact.
仅接收来自Microsoft Exchange联系人的简单邮件传输协议(SMTP)地址的电子邮件。
46. Perform reverse PTR record lookup on inbound SMTP connections MDaemon.
会对所有进来的SMTP进程执行反标记记录查询。
47. However, the intended action of the transport agent usually dictates which SMTP events it will run on.
但是,传输代理的预定操作通常会指定要在哪些SMTP事件上运行。
48. However, some ISPs allow clients to send SMTP traffic from dial-up accounts.
但是,有些ISP允许客户从拨号帐户发送SMTP通信。
49. However, the certificate is not enabled for the Simple Mail Transfer Protocol (SMTP) service.
但是,没有针对简单邮件传输协议(SMTP)服务启用该证书。
50. You need to have IIS and the SMTP service installed and configured.
你必须确保 IIS 和 SMTP 服务正确的安装和配置好。
51. Experience with networking application protocols development including SMTP and HTTP.
使用SMTP和HTTP协议开发网络应用程序经历。
52. Use the drop-down box to select an SMTP e-mail address (default) or a custom e-mail address.
使用下拉框选择SMTP电子邮件地址(默认)或自定义电子邮件地址。
53. For example, it wouldn't do to run mission-critical applications over an SMTP message system.
例如，它不能运行基于smtp消息系统的关键任务的应用。
54. This article analyzes the communication model of SMTP and describes its commands and responses.
分析了SMTP协议的通信模型,详细说明了它的命令和应答。
55. Email reports using MAPI or SMTP interactively or programmatically with a single method call.
利用MAPI或SMTP交互地或通过简单的方法调用以发送报表邮件。
56. After this limit is reached, each SMTP connection made to the server returns with an out-of-memory error.
到达此限制后,与服务器建立的每个SMTP连接将返回内存不足的错误消息。
57. When the form loads, it checks to make sure the user has the SMTP Service installed and that it is running.
加载窗体时,它会检查以确保用户已安装了SMTP服务,而且该服务正在运行。
58. Contains classes used to send electronic mail to a Simple Mail Transfer Protocol (SMTP) server for delivery.
包含将电子邮件发往简单邮件传输协议(SMTP)服务器以便进行传递所用的类。
59. That contains the name or IP address of the host computer used for SMTP transactions.
包含用于SMTP事务的主机的名称或IP地址。
60. It includes WWW Server, FTP Server, DNS Server, Proxy Server, PPTP Server, SMTP Server and POP3 Server.
包括WWW、FTP、DNS、WINS、Proxy、PPTP、SMTP、POP3服务器。
61. The protocol log stores each SMTP protocol event on a single line in the protocol log.
协议日志将每个SMTP协议事件存储在协议日志中的一行上。
62. Even though mail clients use these special protocols to collect mail, they almost always use SMTP to send mail.
即使邮件客户端使用这些特别的协定去收取邮件，他们几乎总是使用SMTP去传送邮件。
63. Messages sent to external users in a.NET domain always travel over the SMTP connector with the.NET address space.
发送到.Net域中的外部用户的邮件始终通过地址空间为.Net的SMTP连接器传输。
64. The hop count for an SMTP Virtual Server in Exchange 2000 can be configured to be between 10 and 256.
可以将Exchange 2000中的SMTP虚拟服务器跃点数配置为从10到256范围内的某个数字。
65. Allow you to connect your SMTP server via a proxy server.
可通过代理服务器连接你的SMTP服务器；
66. Shows how to send email over SMTP using classes in the.
命名空间中的类通过SMTP发送电子邮件。
67. Therefore, the sending SMTP host is still responsible for the final delivery of the message.
因此,发送SMTP主机仍然需要负责邮件的最终传递。
68. No outgoing mail (SMTP) server has been specified in Mail and News Preferences.
在"邮件和新闻"首选项中未指定任何发送邮件(SMTP)服务器。
69. The default maximum hop count for SMTP virtual servers in Exchange Server 2003 is 30.
在Exchange Server 2003中,SMTP虚拟服务器的最大默认跃点计数是30。
70. In MRM, "journaling" commonly means simply saving a copy of an item to another location specified by an SMTP address.
在MRM中,“日志记录”通常仅表示将项目副本保存到由SMTP地址指定的其他位置。
71. The Enhanced SMTP response as defined in RFC 2034.
在RFC 2034中定义的增强的SMTP响应。
72. The 3-digit SMTP response codes that are defined in RFC 2821 are the same for all SMTP messaging servers.
在RFC 2821中定义的三位数SMTP响应代码对于所有SMTP邮件服务器都相同。
73. You can't use the backspace key after you have connected to the destination SMTP server within the Telnet session.
在Telnet会话中连接到目标SMTP服务器后,无法使用Backspace键。
74. In Sender Address, enter the name an account that has permission to send e-mail from the SMTP server.
在“发件人地址”中,输入有权从SMTP服务器发送电子邮件的帐户的名称。
75. In the Outgoing mail server (SMTP) box, type smtp.Gmail. Com.
在“发送邮件服务器(SMTP)”框中,键入smtp.Gmail.com。
76. In the Outgoing mail server (SMTP) box, type the name of your SMTP server.
在“发送邮件服务器(SMTP)”框中,键入您的SMTP服务器的名称。
77. In the dialog box that appears, enter the credentials for the user account on the external SMTP gateway server.
在出现的对话框中,输入外部SMTP网关服务器上用户帐户的凭据。
78. An error occurred while sending mail Netscape was unable to connect to the SMTP server.
在发送邮件时发生了一个错误，Netscape无法连接到SMTP服务器。
79. In this field, type the Simple Mail Transfer Protocol (SMTP) address of the sender that you want to block.
在此字段中,键入要阻止的发件人的简单邮件传输协议(SMTP)地址。
80. On this tab, you can change the various address generation rules (for example, generation rules for SMTP addresses).
在此选项卡上,可以更改各种地址生成规则(例如,SMTP地址的生成规则)。
