swage

swage

1. swage block

(延伸锻造用的)花(板)砧, 型砧, 型模块

2. 3. the embodiment of the method is low in input cost, does not add excessive burden to companies and can save part of swage treatment cost;

3.本方法实施的投入成本低，不为企业增加过多负担，且能节约部分污水处理费用。

3. swage treatment

[化] 污水处理

4. horse form swage

[机] 马型砧

5. top swage

上型模 上模

6. bottom swage

下凹锻模

7. anvil swage

下型模

8. In order to optimize the technology of press and lower the production cost,a two-stage floating elastic pressing structure at the anvil swage of the second punching die was adopted.

为优化冲压工艺,降低生产成本,第2副冲模采用了下模部分二级浮动弹压的结构,成功实现局部胀拉和翻边工艺以及压凸、弯曲、整形多道工序一次成形。

9. According to practice condition,we put forward a new swage model for searching high-performance drawability.We got some conclusions after analyzing and studying it.

为探索高效能的拉伸,本文结合实际生产问题,提出了一种全新的压边模式,对其作出了详细的分析与研究,并得出了相关结论。

10. These supply the theoretical basis for further study and application of swage heat exchangers.

为进一步的研究与应用提供了理论基础。

11. Automation control of foundry swage mixture process is presented in this paper by means of the network control using PC and PLC.

介绍了利用微机与PLC联网控制以实现铸造型砂混制过程的自动化控制.

12. The retrofitting of control system for gypsum centrifuge in swage treatment system of a copper smelter acid plant is described.

介绍铜冶炼烟气制酸装置废水处理系统石膏离心机控制系统的改造。

13. Keywords high pour point reservoir;swage recycling;high effective development;geothermal gradient;sustained development;

关键词高凝油藏;污水回注;高效开发;地热梯度;可持续发展;

14. The Analysis of Cracks in the Cold Swage Tube

冷缩口管产生裂纹原因分析

15. The rigidity and strengh of hollow swage is discussed by the varition principle of elasticity. The thickness compute formulas of hollow swage are presented in different boundary conditions.

利用弹性力学的变分原理，对圆形孔凹模的刚度和强度计算进行了研究，并导出了在不同边界条件下凹模厚度的计算公式。

16. Adjustable for swage's position &hardness, enhance retention force.

刻沟位置及强度可任意调整,增强拉力.

17. Hospital swage mainly comes from septic tanks of sickroom,clinic . emergency, ward faundry etc.

医院污水主要来源于病区化粪池、门诊、急诊、病房、洗衣房等部门。

18. eccentric swage

压料器

19. pressure swage

压模

20. Keywords pressure swage;space maintainer;clinical application;

压模;缺隙保持器;临床应用;

21. Keywords varition principle;hollow;swage;strengh;

变分原理;圆形孔;凹模;刚度;强度;

22. Keywords fixed bridge;crown and swage bridge;safety;

固定修复体;冠桥修复体;安全性;

23. Especially in wetland animal and plants products, ecotourism and swage treatment, these markets are showing great potential.

在湿地动植物产品，生态旅游和污水处理等方面，湿地生态系统服务市场具有很大发展潜力。

24. Keywords MSW fly ash;swage sludge;sintering;lightweight aggregate heavy metal;

垃圾焚烧飞灰;污泥;烧结;轻骨料;重金属;

25. swage engine

型锻机

26. swage die

型锻模 型砧

27. The job loss is largein swage bread , it's widespread, and effecting in it's affecting every industry sector and every demographic group.

失业人数众多且影响广泛，包括了每个工业部门与每一群体。

28. And what would she have to swage her grief,

她该如何才能控制自己的悲伤，

29. double swage hammer

对击式镦锻机 无砧座锤

30. Control Circuit Design for Auto-control System in Small Swage Treating Plant

小型污水处理厂自动控制系统的控制电路设计

31. flatter:a flat-faced swage or hammer used by blacksmiths.

平整工具:铁匠用的一种平面铁模或铁锤.

32. Flatter: a flat-faced swage or hammer used by blacksmiths.

平整工具:铁匠用的一种平面铁模或铁锤。

33. A flat-faced swage or hammer used by blacksmiths.

平整工具铁匠用的一种平面铁模或铁锤

34. plain eccentric swage

平面压料器

35. Keywords plain eccentric swage;drawing coefficient;taper eccentric swage;

平面压料器;拉延系数;锥形压料器;

36. According to the city swage treatment process, we put forward the integrated plan and execution particular for the swage treatment automatic control system.

并且依据城市污水处理工艺实例给出了污水处理过程自动控制系统的总体设计方案和具体实施细节。

37. The Drawable Exploratory Research on Using Taper Eccentric Swage

应用锥形压边圈进行拉伸的探索研究

38. spring swage

弹簧陷型模

39. assembly and the swage is complete when the indicator light is illuminated.

按下绿色按钮，启动扣压机头。模具将紧密地卡住胶管进行扣压，完成后指示灯亮。

40. Swage Treatment: Rainwater and sewage are strictly branched off.

排水：园区内严格执行雨、污分流。

41. swage sharper

整齿器

42. swage machining

旋转模锻

43. In this paper, according to the factual case of city sewage treatment plant, we analyzed and designed an automatic control system for swage treatment what is based on field bus technology.

本文根据城市污水处理厂的实际案例,分析并设计了基于现场总线技术的城市污水处理自动控制系统。

44. swage bolt

棘螺栓

45. swage hammer

模锻锤

46. Swage disposal

污水处理

47. Keywords PLC+IPC;PROFIBUS;swage treatment;intelligence control;fuzzy control;

污水处理;智能控制;模糊控制;

48. swage heat exchangers

污水换热器

49. Keywords oil field;swage;processing;evaluation;application;

油田;污水;处理;评价;应用;

50. During theimpact remedial operation,the lifting height of the casing swage is the main factor influencing the length of cement sheath damaged.

研究表明,冲击整形方法中,整形器的提升高度是影响水泥环损伤长度的主要因素,当冲击次数达到一定值后,冲击次数对水泥环的损伤影响较小。

51. Keywords sulphuric acid production;swage treatment;centrifuge;control system;retrofit;

硫酸生产;污水处理;离心机;控制系统;改造;

52. block swage

粗型锻模

53. casing swage

胀管器 套管修整器

54. swage forging

胎模锻

55. Keywords membrane bioreactor;MLSS;swage;membrane filterable resistance;biological degradation;

膜生物反应器;污泥浓度;生活污水;膜过滤阻力;生物降解;

56. This system identifies the composition such as the system automatically by system of hair anxious data and date of car of HTK-196 swage road.

该系统由发焦数据系统和 HTK-196型铁路车号自动识别系统等组成。

57. Chemical Forms of Heavy Metals in Swage - Irrigated Paddy Soil in Guixi City

贵溪市污灌水田重金属元素的化学形态分布

58. Casing failure problem is getting increasingly serious as cyclic steam stimulation of super heavy oil comes to latter cycles.Some casings cannot be repaired by swage and patch.

超稠油油井随着吞吐周期的增加,套管损坏现象日益严重,有些井虽然采用套管整形及套管补贴技术,但依然无法修复,目前这种情况已成为制约油田进一步发展的主要问题。

59. Press the Foot Switch to close the head and perform the swage.

踩脚踏板合拢扣压机头，完成扣压。

60. swage pliers

轧印钳

61. Keywords Process neural network;Swage disposal;Soft measurement;Algorithm research;

过程神经网络;污水处理;软测量;算法研究;

62. The once prosperous area is filled with trash and swage sewage and lacks electricity.

这个曾经繁荣的地方充斥着垃圾和污水，而且供电不足。

63. This among them, transportation of road of urban light swage carries a system (LRT) is most conspicuous.

这其中,城市轻型铁路交通运输系统(LRT)最为引人注目。

64. Keywords ANSYS;casting swage;limited load;FEA;

连铸型材;极限载荷;有限元分析;

65. With this tool it is a simple matter either to flare or to swage soft copper, brass or aluminum tubing.

适用于:切割软铜,黄铜,和铝材质的管状物体。

66. ball swage

钢球模具 钢球冲模

67. Keywords tungsten alloy;swage;deformation strengthening;

钨合金;锻造;变形强化;

68. Microstructure, mechanical property and recrystallization behavior of swage strengthened tungsten alloy

钨合金材料锻造变形强化的组织与性能及其再结晶行为

69. Keywords locksmith;measure;mandril;V swage;

钳工;测量;芯棒、V型铁;

70. swage head

铆钉头

71. tooth swage set

锯齿侧向错齿量

72. swage anvil

锻接砧 冲压砧 型锻砧

73. Non-overlap swage forging technology on pick cutter body

镐形刀体无飞边胎模锻工艺

74. A tool used for upsetting;a swage.

镦粗用的工具;铁模

75. A tool used for upsetting; a swage.

镦粗用的工具；铁模

76. hollow swage

陷型模 甩子

77. swage process

陷型模锻

78. The rainwater id drained into upper water through storm sewer, and the capacity of swage treatment reaches 3,2000 tons.

雨水经过雨水管（渠）排入地面水体。园区内的日污水处理量可达3.20万吨。

79. it is hard for him to maintain his life with such small swage.

靠那样微薄的一份工资他那以维持生活.

80. Comprehensive adjustment of development mode of common swage recycling in Weigang high pour point oil field

魏岗高凝油田常规污水回注开发模式探讨