thermomechanical
thermomechanical
1. Keywords 7A04 aluminum alloy;thermomechanical treatment;properties;
7A04铝合金;形变热处理;性能;
2. Keywords C194RE copper alloy;thermomechanical treatment;on-line quenching;
C194RE铜合金;热机械处理;在线淬火;
3. Study of the Thermomechanical Coupling Effect in COB Packaging Structures
COB封装中热-机械耦合效应的研究
4. Thermomechanical Properties of Helical Spring of Cu-based Shape Memory Alloys
Cu基形状记忆合金螺旋弹簧热机性能研究
5. THERMOMECHANICAL SPHEROIDIZXING ANNEALING TECHNOLOGY OF GCr15 BEARING RACE
GCr15轴承套圈形变球化退火工艺的研究
6. Thermomechanical analysis of the DFLL test blanket module for ITER
ITER中国液态锂铅实验包层模块结构热应力数值模拟
7. On-line Thermomechanical Treatment Process for N-80 Grade Oil Casing
N80级石油套管在线形变热处理工艺
8. Keywords TA15 titanium alloy;multiple thermomechanical heat-treatment;microstructure;mechanical property;
TA15钛合金;复合形变热处理;显微组织;力学性能;
9. Cui Zhenshan, Liu Cai.A thermomechanical coupled 3-dimensional elastoplastic FEM for finite deformation by using a LCR strain concept [J].Chinese Journal of Computational Mechanics. 1998, 15: 174-179.
[4]崔振山,刘才. 采用共旋应变的三维热弹塑性有限变形有限元法[J]. 计算力学学报, 1998, 15: 174-179.
10. double thermomechanical treatment
二级形变热处理
11. second-order thermomechanical disturbance
二阶热-力学扰动
12. Based on thermomechanics and thermoelasticity theory, the thermomechanical coupling effects and their effects on thermal parameters and mechanical parameters are analyzed briefly.
以热力学和热弹性理论为基础,分析热-力相互耦合作用及其对热特性参数和力特性参数的影响。
13. Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
使用热机分析测定玻璃转变温度的标准试验方法
14. Digital speckle correlation method(DSCM) is used to measure the thermomechanical coupling effect in COB packaging structures.
利用数字散斑相关方法(DSCM),对COB封装结构在热循环状态下的表面热机械耦合效应进行了测量。
15. Keywords dynamic thermomechanical analysis;curing degree;glass transition temperature;
动态热机械分析;固化程度;玻璃化转变温度;
16. THERMOMECHANICAL RESPONSE OF Al PLATES UNDER TENSION TO CW CO_2 LASER RADIATION
受拉铝板对连续波CO_2激光的热机械响应
17. We find that thermomechanical processing method, including deformation and heat treatment, is an effective way to eliminate the anisotropy of Al-Li alloy 1420 sheet.
变形和热处理相结合的热机 械处理工艺是一条行之有效的改善各向异性的途径。
18. In addition, polyamide exhibits excellent thermomechanical and electrical properties that enable the electrical and electronic industry to increase the equipment performance.
另一方面,聚酰胺材料出色的热性能和电性能可确保电子电器工业不断提高产品性能。
19. It is shown that the damage and fracture process of polymeric materials are thermomechanical coupling and, in experiments, the heat generated in the rupture process of ABS ...
同时，结合形变的微观和细观物理机制，对实验中观测到的变温规律作了初步的定性解释。
20. THE STUDY OF THERMOMECHANICAL CONTROL PROCESS FOR Nb-Ti MICROALLYED AUTOMOTIVE STEEL MECHANICAL PROPERTY
含铌钛微合金汽车用钢力学性能与控轧控冷工艺关系的研究
21. Therefore, studying the various microalloy additions and thermomechanical process parameters is the main objective of present study, which can generate large amounts of precipitates in the steel.
因此本研究之最主要目的即是利用控制合金设计及热机制程参数两项观点来产生大量奈米级碳化物在高强度低合金钢基地中产生析出。
22. Keywords solid alloy;model alloy;activity;thermomechanical analysis;
固态合金;金属合金;活度;热力学分析;
23. Figure 2b shows results for a thermomechanical FE simulation.
图2b显示B柱温度-机械有限元模拟的结果。
24. Under temperature cycling (thermomechanical fatigue) conditions, this Pb-rich phase tends to coarsen and eventually leads to solder joint cracking.
在温度循环条件（即热机械疲劳条件）下，富铅相会变粗并最终导致焊点破裂。
25. In thermomechanical treatment,building models by using artificial neural networks to predict mechanical properties for autocontrol and technological design is a new way of technological research.
在钢丝形变热处理中，用人工神经网络建模预报性能，为自动控制性能和工艺设计奠定基础，并为该工艺探索提供了一种新的途径。
26. Properties and processing of thermomechanical treatment Cu-Cr-Zr alloy by artificial neural network
基于人工神经网络的铜合金形变热处理工艺和性能
27. Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
塑料线膨胀系数试验方法
28. Factors Influencing Flocculation of Dissolved and Colloidal Substances in a Thermomechanical
处理对浆的作用不明显。影响热磨机械浆中溶解和胶体物质絮聚的因素
29. Microstructure and Properties in Heavy Die Standard Piece After Thermomechanical Heat Treatment
大型模具标准件形变热处理后的组织和性能
30. One of the key problems for thermomechanical treatment of aluminum alloy is how to determine the process parameters.
如何正确地选择和控制工艺方案及其参数,是影响铝合金形变热处理效果的一个关键因素。
31. Thermomechanical fatigue(TMF) life of three temperature-strain phase angles and two specimen dimensions was studied in directional solidification(DS) superalloy DZ125.
对DZ125定向凝固铸造镍基高温合金进行了三种相位和两种试样尺寸的热机械疲劳实验研究。
32. High temperature isothermal mechanical fatigue and in phase thermomechanical fatigue (TMF) tests in stress control were carried out on a molybdenum alloy.
对钼合金进行了应力控制高温低周等温疲劳和同相位热机械疲劳试验。
33. Combining ANN with Dissipative Structure Theory to Determinate the Thermomechanical Parameters for Wrought Superalloys
将人工神经网络和耗散结构理论相结合以确定变形高温合金的锻造热力参数
34. NUMERICAL SIMULATION OF THERMOMECHANICAL FATIGUE BEHAVIOR UNDER STRAIN CONTROLLED CONDITION
应变控制的热机械疲劳行为的数值模拟
35. By Thermomechanical Coupled Finite Element Method, the hot rolling processes of H beam were simulated, and the rolling pressures and their distributions were obtained.
应用热力耦合大变形有限元方法,模拟了H型钢的热轧变形过程,给出了轧制力的大小及其分布方式。
36. Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
张力受控的热机械疲劳测试惯例
37. Study on Coupled Thermomechanical Problems with Strong Heat Deposition
强热沉积下热力耦合问题研究
38. thermomechanical aging
形变热处理
39. Keywords thermomechanical treatment;austenite grain;strain-stress curve;recrystallization dynamics;
形变热处理;奥氏体晶粒;应力-应变曲线;再结晶动力学;
40. Effect of Thermomechanical Treatment on Properties of 2519 Aluminum Alloy
形变热处理对2519铝合金性能的影响
41. thermomechanical treatment processing
形变热处理工艺
42. thermomechanical process
形变热处理法
43. thermomechanical rolling
形变轧制
44. FINITE ELEMENT APPROXIMATIONS OF THE THERMOMECHANICAL PHASE TRANSITIONS IN SHAPE MEMORY ALLOYS
形状记忆合金问题的有限元逼近
45. Z.Q.Gong, K.Komvopoulos, “Mechanical and Thermomechanical Elastic-Plastic Contact Analysis of Layered Media With Patterned Surfaces.” J.Tribol, Vol.126, PP.9-17, 2004.
徐泽志、曹智强“人工关节垫片表面特徵的磨耗分析”元智大学机械工程研究所硕士论文，2005。
46. Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
拉力下热机械分析的玻璃转变温度分配的标准试验方法
47. thermomechanical vibration treatment
振动形变热处理
48. Morris, J. G., and Howard, K. K., “Thermomechanical Treatments of Alloys,” Journal of Applied Physics,
接引用之文献请勿列入，期刊、书籍（英文请以斜体字表示）需列全名。各类参考文献之写法须依下列格式例：
49. thermomechanical control process
控轧控冷
50. Effect of Thermomechanical Control Process on Structure of Nb-Ti Microalloy Steel for Automobile
控轧控冷对含Nb-Ti微合金汽车用钢组织的影响
51. The thermohardening temperature, chemical heat-resistance and thermomechanical property of the curing material of different types of bisphenol benzoxazine were presented.
摘要对不同结构双酚型苯并恶嗪树脂的热固化温度，固化物化学耐热性和热机械性能进行了综述。
52. Based on the element-free Galerkin method, a topology optimization method for designing thermomechanical actuated compliant mechanisms with geometric nonlinearities is studied.
摘要将无网格伽辽金法引入到拓扑优化中，利用其进行了几何非线性热固耦合柔性机构的优化设计研究。
53. Thermomechanical stress is one of the main causes that results in destruction of the refractory lining in many situations.
摘要热应力是耐火材料破坏的主要原因之一。
54. The effects of thermomechanical treatment on the structures and properties of 7A04 aluminum alloy were studied by mechanical tensile test, metallographic and TEM analysis.
摘要采用力学性能测试、金相显微分析和TEM等方法，研究了形变热处理工艺对7A04铝合金的组织和性能的影响。
55. Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
旋转电机。第18-34部分:绝缘系统的功能评价。成型绕组试验过程。绝缘系统的热机耐力评价
56. Keywords grain boundary design;coincidence site lattice;thermomechanical processing;
晶界设计;重合位置点阵;形变热处理工艺;
57. Keywords grain ultrafining thermomechanical stainless steel;
晶粒超细化;形变热处理;不锈钢;
58. final thermomechanical treatment
最终形变热处理
59. THERMOMECHANICAL ANALYSIS OF LIGNIN DERIVED FROM HIGH PRESSURE EXTRACTION OF WOOD
木材高压萃取木质素的热机械分析
60. Keywords lignin;thermomechanical analysis（TMA）;high pressure extraction;Larix gmelinii Rupr.;
木质素;热机械分析（TMA）;高压萃取;落叶松;
61. In this paper,deinked pulp(DIP)and bleached chemi thermomechanical pulp(BCTMP) with kraft pulp(KP) used to make newsprint at different beating degrees are researched.
本文研究了脱墨浆(DIP)、漂白化学预热机械浆(BCTMP)与硫酸盐浆(KP)在不同打浆度下配抄新闻纸的状况。
62. Thermomechanical stress of its lining is a major impact that affects its life period.
本文运用有限单元法,对钢包底的温度场和应力场进行了数值模拟。
63. Keywords constitutive equation;thermomechanical simulation;AZ61 magnesium alloy;flow stress;
本构方程;热模拟;AZ61镁合金;流变应力;
64. thermomechanical condensation method
机械热压充填法
65. Majta J.Kuziak R.Pietrzyk M Use of the Computer Simulation to Predict Mechanical Properties of C-Mn Steel,After Thermomechanical Processing 1996(1-4
杨平.高鹏.崔凤娥.孙祖庆低碳钢压缩变形时的形变不均匀性及其对铁素体转变的影响[期刊论文]-钢铁2004(3
66. THERMOMECHANICAL COUPLED FINITE-ELEMENT MODELLING OF SLAB HOT ROLLING
板材热轧热力耦合有限元模拟
67. Structure Evolution of a Nb-Microalloyed Extra-Low Carbon Steel during Simulated Thermomechanical Control Process
模拟控轧控冷过程含Nb超低碳钢的组织演变
68. Keywords fuzzy mathematics wrought superalloy grain size forging thermomechanical parameters;
模糊数学;变形高温合金;晶粒度;锻造热力参数;
69. Thermomechanical Treatment for the Automobile Steering Knuckle
汽车转向节形变热处理
70. Keywords fluidized bed coating;xylanase;stabilized enzyme;thermomechanical stability;
流化床涂布法;木聚糖酶;稳定化酶;耐热性;
71. Factors Influencing Flocculation of Dissolved and Colloidal Substances in a Thermomechanical Pulp Water
滤液中溶解和胶体物絮聚的影响因素
72. Modeling Method of Some Kinds of Special Construction in Thermomechanical Analysis of Lining System
炉衬热应力分析中几类特殊结构的建模方法
73. thermomechanical coupling behaviour
热-力学偶合特性
74. thermomechanical effect
热-力学效应 热变形效应
75. thermomechanical curve
热-力学曲线 热变形曲线
76. thermomechanical stability
热-力学稳定性
77. thermomechanical coupling
热-力耦合
78. thermomechanical measurement
热-机械测量
79. thermomechanical processes
热/力压缩
80. LIFE PREDICTION OF HOT WORK DIE STEEL UNDER THERMOMECHANICAL FATIGUE
热作模具钢的高温热机械疲劳寿命预测
