valve
valve
1. The discharge valve of NO.2 liner is washed out.
2号缸的排水凡尔剌了。
2. The suction valve of NO.3 liner is seized.
3号缸的上水凡尔卡死了。
3. Which is a thickening in the valve of the...kidney?
|那会使...肾脏的瓣膜变厚?
4. There are two ports in the valve of an engine.
一台发动机的阀门上有两个通气孔。
5. Of or relating to the tricuspid valve.
三尖瓣的属于或关于心脏三尖瓣的
6. Three-way valve into two hands and streaming.
三通阀分为合流和分流两种。
7. The three-way valve was invented in the 1950s.
三通阀诞生于50年代。
8. Three-way valve : born in the 1950s.
三通阀：诞生于50年代。
9. Shanghai Aoli Pump Valve MFG.Co., Ltd.
上海奥力泵阀制造有限公司。
10. Shanghai Flow Valve Fitting Co., Ltd.
上海富乐阀门管件有限公司。
11. SHANGHAI JIANGNAN SHIPYARD VALVE CO., LTD.
上海江南造船阀门有限公司。
12. SHANGHAI NAI BO PUMP VALVE MANUFACTURING CO., LTD.
上海耐博泵阀制造有限公司。
13. Shanghai ；Sarco ；Valve ；Co.， ；Ltd.
上海莎克阀门制造有限公司；
14. Toyota recommends making a quick check of the PCV valve.
丰田汽车公司建议进行PCV阀的快速检查。
15. Mikrotherm tandem valve the first great success.
串联阀Mikrotherm第一个卓越的成就。
16. An aortic valve need not be bicuspid to calcify.
主动脉瓣并非是两个瓣叶的才钙化。
17. What is heart mitral valve velar prolapse?
什么是心脏二尖瓣膜脱垂？
18. Remove check valve and valve seal from booster.
从倍力器上卸去逆止阀和阀门密封。
19. Remove the elbows from the relief valve base.
从安全阀底座拆卸弯头。
20. Drain system and remove valve from piping.
从管道上排放系统和拆卸阀门。
21. Lift out disc holder assembly from body of valve.
从阀体上取出阀瓣固定器总成。
22. Remove the body bolts from the valve body.
从阀体上拆卸阀体螺栓。
23. Lift retainer and check assembly from valve body.
从阀体内取出护圈和止回阀总成。
24. Ball Port Options viewed from top of valve.
从阀门顶部观察球阀端口选项。
25. Sloan Valve Water Technologies (Suzhou) Co., Ltd.
仕龙阀门水应用技术(苏州)有限公司
26. He soon detected the faulty valve.
他很快查到了出毛病的阀门。
27. The safety valve of his anger opened.
他控制怒火的安全阀打开了。
28. Detail of transfer line valve configuration.
传输管系统阀门配置详图。
29. Low Pressure Valve Options and Accessories Misc.
低压阀门备选件和附件。
30. Have you turned off the water valve?
你关掉水阀了吗？
31. You put air into a bicycle tyre through the valve.
你通过汽嘴把空气打入自行车轮胎。
32. Use patented valve for high paste.Never pasted.
使用高黏度专利之阀门，永不黏死。
33. Fork Lift, Valve,Body Coupling, Bracket.
供应阀门,叉车起重机,耦合器,插座等.
34. Brass foot valve with stainless s.
供应黄铜底阀。
35. Stop: Shut off the valve for the suction pipe.
停机：1、关闭吸入管阀门。
36. All that is required is a valve.
全部所需的就只是一个活门。
37. Close shutoff valve No. 2 then shutoff valve No. 1.
关闭2号关闭阀，然后关闭1号关闭阀。
38. Shut off supply pressure and drain valve.
关闭供应压力和排泄阀门。
39. Close shutoff valve No. 2 then No. 1.
关闭关闭阀2号，然后关闭关闭阀1号。
40. Close the drain valve and refill the tank, and restore power.
关闭排污阀，重新向内胆注水，重新恢复电源。
41. Close the shutoff valve upstream of the regulator.
关闭调节阀上游的关断阀。
42. Shut off the supply pressure and drain the valve.
切断供应管线的压力,将阀门内残余流体排放出来。
43. BRAKE METERING VALVE CONTROL LINKAGE.
刹车计量活门操纵连杆。
44. NOSE GEAR SHOCK STRUT REBOUND VALVE.
前起落架减震支柱防反跳活门。
45. The aux. Air bottle safety valve to be submitted.
副空气瓶安全阀提交。
46. Would you mind open that valve for us?
劳驾为我们打开那个闸门好吗?
47. BEIJING HAOLI VALVE MANUFACTURING CO., LTD.
北京好利阀业有限公司。
48. Composed of a single valve or piece. Used of a shell.
单瓣的由单个瓣膜或部分组成的。用于壳
49. Sanitary water pressure tank safety valve.
卫生水压力柜安全阀。
50. China.Hundred Sichuan valve group limi.
发布者:中国.百川阀门集团有限公司。
51. Is the valve of receiving tank open?
受油舱阀门是否已打开?
52. Export the valve,flange and fittings.
另常年出口阀门及配件。
53. Replaceable Stainless Steel Seat and Valve Disc.
可更换不锈钢阀座和阀瓣。
54. Taizhou East Solenoid Valve Technology Co., Ltd.
台州亿思特电磁阀科技有限公司。
55. On that line is the lay length of that valve.
在这一行上是那个阀门的铺设长度。
56. Prior to reassembly flush valve to remove sediment.
在重新组装冲洗阀之前，先清除沉淀物。
57. NINGBO YINZHOU HAIXIN TIRE VALVE CO., LTD.
宁波市鄞州海鑫气门嘴有限公司。
58. NINGBO ZHENGYI PUMP VALVE CO., LTD.
宁波正一泵阀有限公司。
59. Safety valve to be pressure tested.
安全阀应做压力试验。
60. Relief valve must be piped to a suitable drain.
安全阀必须配置通向适当排泄口的排泄管道。
61. Damaged or fouled relief valve seat.
安全阀阀座受到损坏或污染。
62. Damage or fouled relief valve seat.
安全阀阀座损坏或受到污染。
63. Close valve completely before installation.
安装前要完全关闭阀门。
64. Cast steel valve installation at an oil refinery.
安装在炼油厂的铸钢阀门。
65. Install relief valve cover nut and tighten.
安装安全阀阀盖螺母,并加以紧固。
66. Install the hydraulic valve tappets.
安装液压气门挺杆。
67. Install the valve bonnet. Torque to 70 ft./lbs.
安装阀盖。扭矩为70英尺/磅。
68. Complete valve data: figure number and valve size.
完整的阀门参数:型号和阀门通径。
69. Turn handle to be perfectly perpendicular to valve body.
将手柄旋转到与阀体完全垂直的位置。
70. Attach threaded end of stem to the brass valve arm.
将杆螺纹端附加到黄铜臂上。
71. Fit each valve to its respective valve guide.
将每个阀安装到各自的阀导管。
72. Connect vacuum line to EGR valve.
将真空管路连接到EGR阀。
73. Add these weights to valve and handwheel weights.
将这些重量加在阀门和手轮重量上。
74. Screw the cover onto the valve body.
将阀盖旋在阀体上。
75. Open valve to balance set point as recorded.
将阀门开启到所记录的设置点上。
76. Open valve to balance set point as recorded in 8.2.
将阀门开启到步骤8.2所记录的平衡设置点。
77. Restore valve to original working condition.
将阀门恢复到原先的工作状态。
78. Open the valve one complete turn.
将阀门打开一个整圈。
79. A triangular fold or flap of a heart valve.
尖瓣心脏瓣膜的褶皱或瓣片之一
80. Dimension A, center of valve port to floor level.
尺寸A,阀门端口中心至地面的距离。
