weldable

weldable

1. Only two common structural alloys in the 2XXX series are weldable: 2219 and 2519.

2XXX系列中仅有两种常用结构合金可焊：2219和2519。

2. Type ZH|360 longitudinal seam welder is exclusively used for longitudinal seam welding on flat plates, cylinders, opened boxes of weldable metals.

360纵缝焊接机专用于可焊接金属的平板、圆筒、开口箱体等工件的纵缝焊接。

3. Characteristics of the High Strength Weldable HQ80 Steel Plates of 785MPa Tensile Strength Class

785MPa级焊接用HQ80高强度钢板的特性

4. non weldable

adj. 不可焊接的

5. Prestressed Concrete Bars is Medium Carbon (0.3%) Steel Bar (Known as PC BARS) of hightensile strength, low relaxation properties, and easy weldable.

PC棒属于中碳钢棒（0.3%）高抗拉强度，低松弛率且易焊接，水泥基椿用。

6. Keywords PVC foam;weldable;continuous process;physical foaming;

PVC泡沫;可熔接;连续法;物理发泡型;

7. weldable structural steel

[化] 可焊接的结构钢

8. Not all aluminum alloys are weldable. In general, the least weldable alloys are also the strongest alloys.

不是所有合金都是可焊的。通常，最难焊接的合金，其强度也最大。

9. For exploiting international rolled steel market farther, the weldable high strength reinforced bar were developed according to Canada standard.

为进一步开发国际钢材市场,研制开发了符合加拿大可焊性高强度钢筋标准要求的高强度钢筋。

10. Type of welding-repairing, position of weldable low alloy cast iron cylinder block,welding-repairing and sequent heat treatment process in Italian TEKSID Company have been introduced.

介绍了焊补缺陷的类型、可焊补的汽缸体部位、焊补工艺及焊后热处理工艺。

11. The Aeronautical Weldable Titanium Alloy of Russia

俄罗斯的航空可焊钛合金

12. A closely related alloy, which is also very weldable, is 2519.

其相近合金也是可焊的，如2519。

13. Chemical compositions and mechanical properties of weldable cast steels made in different countries have been analyzed and contrasted.

分析对比了国外焊接结构铸钢的化学成分和力学性能,以碳、锰元素为主配制了适宜碳当量的焊接铸钢。

14. Flat products made of steels for pressure purposes - Part 3: weldable fine grain steels, normalized.

压力容器用扁平钢轧材。第3部分:经过正火处理的可焊细晶粒钢。

15. Specification for flat products made of steels for pressure purposes - Weldable fine grain steels, thermomechanically rolled

压力容器用的扁平钢轧材规范。热机轧制可焊细粒钢

16. Specification for flat products made of steels for pressure purposes - Weldable fine grain steels, quenched and tempered

压力用的扁平钢轧材规范。淬火和回火可焊细粒钢

17. "Where steel is clean, flat, weldable grades of low carbon steel, a resultant joint strength of 100% of the annealed strip can be guaranteed providing proper operation, set-up and maintenance practices as followed. "

只要是干净、平整、可焊接的低碳钢,操作正确,根据要求安装、维修,可保证退火的钢板接头有100%的强度。

18. weldable copper

可焊复合铜板

19. weldable analysis

可焊性分析

20. Keywords weldable high strength reinforced bar;development;mechanical properties;ratio of finished product;histogram;

可焊性高强度钢筋;研制开发;力学性能;成材率;直方图;

21. Development and Production of Weldable High Strength Reinforced Bar

可焊性高强度钢筋的开发与生产

22. weldable primer

可焊接底漆

23. Weldable grade. Good resistance to corrosion by all common organic acids and salt water. Also highly resistant to most alkaline solutions.

可焊等级。对于所有普通的有机酸和盐水,具有很好的耐腐蚀性能。对于大多数碱性溶液。也具有很高的耐腐蚀性能。

24. Development of Weldable Heat-Resistant Nodular Cast Iron Engine Components

可焊耐高温球墨铸铁发动机零件的开发

25. WELDING RESEARCH AND DEVELOPMENT OF WELDABLE ALUMINUM-LITHIUM ALLOYS

可焊铝锂合金焊接研究现状

26. Development of weldable PVC foam made by a continuous physical foaming method

可连续生产的物理发泡法可熔接PVC泡沫的研制

27. Alloy 2219 is very easily weldable and has been extensively welded in fabricating the external tanks for the U.S. space shuttle.

合金2219很容易焊接，已广泛应用于美国航空飞机的外挂油箱的焊接。

28. All plates should be of weldable quality. Edges of the plates should be clean and clear.

同时还必须具有可焊接品质。钢板的边缘应该光洁。

29. Titanium-bearing Weldable Steels for Offshore Structures

含钛可焊接海洋结构用钢

30. Fasteners should be no corrosive and may consist of self-taping screws, weldable studs, cleats, and clips.

固定的装置不能有腐蚀性的物质，一般自带螺钉，可焊接的螺钉，防滑拴和夹子。

31. Weldable alloys have a composition that falls either well above or well below the maximum cracking sensitivity.

在所有可焊合金中，有某些合金的裂纹灵敏度远远低于极限裂纹灵敏度。

32. Of all engineering materials, only metals are truly weldable and repairable.

在所有的工程材料中,只有金属真正能焊接和修补.

33. They are readily weldable, in most cases, with or without filler metal.

多数此种合金可焊（不论加或不加焊料金属）。

34. Development of fire-resistant and weathering construction steel weldable with high heat input and its typical use

大线能量焊接耐火耐候建筑用钢的研制及应用

35. They are of moderate strength, have good corrosion resistance, and are readily weldable.

它们有中等强度，良好的耐腐蚀性，可焊。

36. Benefits of Sandvik Steel Belts include: hard and smooth surface, temperature resistant, easy to clean, endless weldable, wear resistant, high tensile stress resistance, and easy to repair.

山特维克高品质钢带的特性：表面坚硬光滑；耐高、低温；耐腐蚀及磨损；易清洁；环形焊接；高热传导性；耐高张应力；

37. "It is understood that all steels are weldable, flat and free from unweldable coatings. "

当然,所有的钢应是可焊的、平的、没有不能焊的涂层。

38. A fast drying, two component, weldable modified zinc ethyl silicate pre-fabrication primer for application by manual or automatic spray.

快干型双组分可焊改性硅酸锌车间底漆，可用人工喷涂或自动喷涂。

39. All of these alloys are readily weldable.

所有以上合金均可焊。

40. Theapplications of the VN microalloyed technique in high strength, weldable reinforcingbars, microalloyed forging steels, and the third generation TMCP craft are presented.

指出VN微合金化技术在高强度焊接钢筋、非调质钢、薄板坯连铸连轧高强度板带和第三代TMCP艺中的应用。

41. A. noticeable success of modern processing techniques in steelmaking and hot rolling in order to acquire weldable HSLA steel with high toughness is described from the strategic viewpoint.

本文从战略角度分析了现代炼钢、轧钢中的显著成就，其目标是获取易焊的高韧性、高强度低合金钢。

42. Non weldable ribbed bars and wire rods.

标准/规范英文名： Concrete reinforcing steels.

43. Keywords heat treatment, weldable, pre-precipitation, solution, ageing, strength, stress corrosion;

热处理;可焊;预析出;固溶;时效;强度;应力腐蚀;

44. INFLUENCE OF HEAT TREATMENT ON MECHANICAL PROPERTIES OF HIGH ELASTIC MODULUS, HIGH STRENGTH, HIGH TOUGHNESS AND WELDABLE TITANIUM ALLOYS

热处理对高弹高强高韧钛合金性能的影响

45. Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.

焊接.电子和激光束焊接接头.缺陷的质量级别导则.第1部分:铝及其可焊合金

46. weldable strain gauge

焊接式应变计

47. weldable steel

焊接钢 焊钢 可焊钢

48. Study on Lead-free Weldable Coating of Chip Electronic Components

片式电子元器件中无铅可焊镀层的研究

49. Because petroleum pipe has an awful work environment, it has more and more demands on its wall deep, intensity, toughness, weldable and so on.

由于石油钢管的工况恶劣，石油钢管对壁厚、强度、韧性以及可焊性等各个方面具有越来越高的要求。

50. Second, and most importantly, many of the strongest aluminum alloys are not weldable using conventional techniques.

第二，也是最重要的一点，很多高强度铝合金不可使用惯用的技术焊接。

51. 25 kinds of the weldable Tin and Tin-base alloys electroplating processes in the nearest 10 years in China were rewiewed systematically and completely.

系统而又比较全面地总结了我国近10年来电镀可焊性锡及锡基合金工艺25种,并指出了每种工艺的镀液性能和镀层质量的优劣,最后提出了可焊性电镀的发展趋势。

52. Hot-rolled products of structural steels - Technical delivery conditons for the thermomechanical rolled weldable fine grain steels

结构钢热轧制品。热机轧制的可焊接细粒钢的交货技术条件

53. Realize that some alloys, often the stronger ones, are non-weldable. Make sure the selected alloy is readily weldable.

认识到有些合金，尤其是那些高强度的，通常是不可焊的。确保选定的合金可焊。

54. The results showed that the plate had high strength and low temperature impact toughness and good lamellar tearing resistant property and was weldable.

试验表明抗层状撕裂钢板具有高强度、高低温韧性、易焊接以及良好的抗层状撕裂性能,产品实物质量优于国家标准要求,满足了用户的特殊需求。

55. BS 4449:2005 Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification

这个是螺纹钢的标准吧，我也正需要，顶起来，希望有的人支持一下！

56. Choice of material for electric locomotive air pipeline on the basis of weldable characteristic

金属材料可焊性与机车空气管道材质选择

57. This paper analyses the weldable characteristics between congeneric metals and heterogeneous matals in details,aiming at the choice for electric locomotive air pipeline material.

针对电力机车空气管道材质的选择问题,详细分析了一些常用同种金属材料和异种金属材料的可焊性,并根据应用经验提出选材参考对象。

58. When we speak about aluminum alloys being "weldable" or "non-weldable," we are usually referring to the alloy's ability to be welded without hot cracking.

铝合金“可焊”或“不可焊”，是指合金焊接时是否热裂。

59. Aluminium lithium alloy is lower in density and higher in strength.It is a new kind of weldable structural material for space navigation.

铝锂合金是密度较小、强度较高,且具有可焊接特性的新型先进铝合金宇航结构材料。

60. Flow stress of high-strength weldable 2195 aluminium-lithium alloy during hot compression deformation

高强可焊2195铝-锂合金热压缩变形的流变应力

61. high-strength weldable aluminium alloy

高强度可焊拉强度合金

62. Properties of High Strength Weldable Meta-Bainitic Steel Plates

高强度可焊接准贝氏体钢板的性能

63. high strength weldable aluminium alloy

高强度可焊铝合金